Made this a resource, as this has helped me a couple of times and is simple enough for inexperienced users to succeed. I'd like to add a step-by-step guide that help me to do that. I it found over at lawrencesystems.com I wanted to move jails from bluePool to ssdPool logged out from...

Hey everyone, just enabled cloud sync to a new backblaze b2 subscription. I noticed that after a couple days the "bucket" on backblaze was much larger than the parent dataset that it was supposed to backup. I discovered that this is due to my iocage Plex jail's external storage of ~3TB of...

I have an issue to set up properly with vlans. I spend entire week battling this annoying issue. I got WAN, LAN, and OPT1 port on my PFsense Box. My Freenas is connected to the OPT1 port. Wifi, and other lans are connected to Lan Port. To simplify things. I have my jails set as a static...

For my current setup all my jails are configured to use vnet0 interfaces. Under the network settings I specifically set them to "vnet0:bridge0". When I look at ifconfig this causes them to have the name vnet0:1, vnet0:2 ... vnet0:n for each jail. My VMs are configured with tap interfaces listed...

Hi guys, I have been researching this issue all over the web. I just can't seem to get my Plex to find the media in the folders I have mounted. I use plex-plexpass 11.2-RELEASE-p14 (version says N/A) for FreeNAS-11.2-U6. I have tried the "non-plexpass" version as well, and it didn't make a...

Hi, I'm installing MariaDB, nginx and phpMySQL in a jail to serve a few applications on my network. As the best practice for using jails suggests, I mounted a FreeNAS dataset inside the jail to store the database (/var/db/mysql). Now what about the configuration files (for example...

Hello FreeNAS Community, I have installed an Intel X540-T2 (Dell) network adapter in my FreeNAS server. Unfortunately FreeNAS does not find this network adapter. Is there a way to integrate the network adapter somehow? I have already chosen the driver for Unix...

I accidentally delete all my jails/plugins. I have backup of everything and I have access to the files. My question is: how do I make them appear again in the system (and in the GUI)? Do I need to create them all, one by one, and then restore the files? Or is there a way to just restore them...

Hi, I have a pool with 2 4tb drives and I need to upgrade it. I have 2 more 4tb that I'd like to add to it. I have them currently striped but I want to raid them now. Do I have to destroy the old pool first? I've backed up all my data except my jails because I don't know how to do that. How...

Hi! I'm trying to install Monitorr in a jails on FreeNAS, and I was doing well, but I realized that Monitorr is "Linux thing": for example, it tries to get info from "/proc/meminfo", which doesn't exist in FreeBSD... So... Is there a way to simulate this? Is there another app like Monitorr...

Hello FreeNAS community, I’ve been doing some FreeNAS 11.2 U3 testing in a VM environment since I’m planning on updating my old FreeNAS 9.10.2-U6 installation. OIn this new nstallation I’m planning on installing plugins like: Sonarr, Radarr (or couchpotato), sabnzbd and Plex. For this I’m...

I just upgraded a freshly installed 11.2-U2.1 installation to 11.2-U3. I'm now running into the issue that I cannot install plugins or create jails, as I get the following error message. It seems there is an issue with the on/off vs. yes/no boolean options here. sudo iocage create -r...

Wie schon beschrieben möchte auf Jails außerhalb meines Heimnetzwerkes zugreifen, um z.B. Minecraft auf dem Server zu spielen. Ich habe keinen DS-Lite Tunnel und habe auch schon die Ports über die Fritzbox freigegeben. DynDNS ist ebenfalls eingerichtet. Es scheint an der Portfreigabe zu...

Current PlexPass Version Installed = 1.13.9.5439 Current FreshPorts PlexPass Version Available = 1.15.1.791_1 Yes, I know I am on the new platform and should be migrating to IOCage but I'm not 100% comfortable doing so and can't afford a mis-step when it comes to the library of 20tb I've spent...

I have installed a new version of FreeNas. When i try and install a plugin the install Hangs at 50.00% -Multimedia/FFMPEG for the plex media server PlexPass. I saw the 11.2-u2 had problems with VNET causing hangs in Jails. So because it was a new install I downloaded the 11.2U1 iso and...

Hi All, I am hoping you can help. I set up my first Plex mount and got everything working. In "MY PC" my initial volume which I set up now became offline and somehow Plex created a new drive (or at least it looks like a drive with no letter) with the plex logo. Ever since, I now cant get into...

Hello I wanna ask maybe dumb thing but I have already tried some tests and nothing worked as I expected. I have 2 jails now. Jail 1 - nextcloud jail 2 - syncthing I wanna acces theese two services from my domain like accesing my nextcloud from cloud.mydomain.com and syncthing like...

Hi! I'm trying to create new Jail in 11.2 version by using new GUI. Unfortunately, FreeNas is not letting me to create one and showing error: I've checked available versions by using iocage list -r and it shows me, that 11.1 and 11.2 are fetched. Whole configuration of jail is set to...

so everything works on the networking end, at least it should. I can access the web UI and the server accepts and replies to ICMP messages but the server continually fails to sometimes connect when trying to access it in minecraft and when it does appear it always fails and times out when it...

Hello everyone, I would like to use ddns for remote IPv6 access to my jails. I need to set-up DDNS with IPv6, because my ISP does not assign IPv4 addresses. Some words on my set-up: I am running FreeNAS 11.2 with several iocage jails that should be externally accessible. After some fiddling...

I originally setup my server over 2 years ago and with the new update, I'm trying to relearn how to setup jails and work with the OS. My main goal now is to rebuild my jails so they are under iocage. That brings me to why I'm here...there's a lot I don't remember. 1. So this is what I'm trying...

I have upgraded from 11.1 to 11.2 and installed a new plug-in for my plex server and migrated everything over to it. I then deleted the old plug-in and all the old jails. Now that I am done, there is still a Jails dataset leftover. Is it safe to delete this (not the one in the new iocage jails)...

Hi guys, i have made a fresh install of FreeNas in Version 11.2RC2. Is there a chance to install any Plugins on this Version ? I have tested the Plex and NextCloud Plugin, this are the 2 plugins i needed. But there is the same Error on both Plugins when i try to install it. Anybody has an...

Hi im not able to change Settings like auto-boot in the newest 11.2 rc2 ui for my jails that i created in 11.1 because the save changes Button is grey and not clickable. If i create a new Jail in 11.2 it works fine and i`m able to change settings in the UI. But even if I update my 11.1 Jails to...

Hi all, looking for a little help with my Plex jail (iocage). I have manually installed Plex in a jail, on my server running 11.2 RC1. My jail will show that plex is still is still up, but my server goes down and is unreachable. Once i restart the jail, it comes back online. It 'seems' to...

update: same problem for Plex it seems: https://forums.freenas.org/index.php?threads/updating-plex-plugin-in-11-2.70757/ --- Hello everyone I recently updated to FreeNAS 11.2 and I'm mostly using Docker for all my Plugins / additional software now. However, I used the Emby plugin since I was...

Hi, A while back I followed the guide by JRuehlig https://www.jruehlig.com/wordpress/installation-configuration-of-freenas-plugins/ [I have the site bookmarked, but there seems to be an issue with the site]. My setup was working 100% (thanks Joshua) until a week ago, but now for some reason...

In a nutshell: I can't seem to access my plex media server. I'm a complete newbie to FreeNAS, as I just installed it today. I've watched a few videos on how to set it up, but no success thus far. From what I've seen, there's supposed to be a "Management" button in between the Stop and Delete...

Every time I attempt to start a jail on an older release I get an error stating "Local variable 'addr' referenced before assignment. Upon further inspection the error reads: Error: concurrent.futures.process._RemoteTraceback: """ Traceback (most recent call last): File...

Hey all, Hopefully its a quick one. I have been reading a lot about jails and understand with 11.6 this is something that i will need to go with. I have a fresh freenas, just burning in the kit and getting my resources ready to start setting it up. Storage side i believe is all sorted. next...

Hi - I'm looking for a little - maybe a lot - of help/guidance in how to bind the Transmission Jail to a specific NIC? My motherboard has 2 NICs (see signature), one goes to the ISP's router (192.168.1.x) and the other i'd like to go to a VPN enabled router (192.168.2.x). Is such a thing...

Hi all, I'm on FreeNAS-11.2-BETA3, and I have an issue with my nextcloud Jail. I tried adding a mount point to it for sharing files between SMB and nextcloud, but since the new GUI doesn't show an option to create a new directory, I ended up with an error when I wanted to start my jail, stating...

Finally I have have my NAS up and running! :) Now I am in the process of installing plex, and I figured that it would be of quite a benefit to ask the community here for help before going out of my mind. I can see most posts prefer a manual install in a jail and not the plex plugin? Why, is...

Has anyone had any success in installing Telly in a FreeNAS 9.10 Jail. I have created a standard jail and done the pkg update and upgrade. I have then fetched the telly-1.0.3.freebsd-amd64.tar.gz release from GitHub, but when I try to extract the executable using tar, i get and error message...

I upgraded from FreeNAS 9.10 to 11.1-stable and I’m having trouble with the iocage migration. Maybe I should have just went to 11.2-stable and if that will fix this issue let me know. This is what we are working with. After the upgrade I updated the ZFS pool to add the features per the prompts...

My LAN is 192.168.1.0/24 and I want to be able to create jails: in that LAN addresses (so reachable from the LAN) but also 'internal' only jails (like 10.0.2.1/24) that are not reachable from the LAN but natted to the outside world (so they can reach out internet and LAN services but no...

I have tried and tried to get Plex to see my TV shows and one time it worked. Then I starting setting up some other plugins, deleted the original mount point for plex due to those issues, and I have not got it to work since. Been working/reading guides for 4 days now trying to figure out why it...

Several years ago I purchased a Netgear ReadyNAS as a home server, largely to host Plex. A few years later Netgear came out with a new model and abandoned my version, so it no longer could run newer versions of Plex. Soon it was useless as a Plex server, and I was faced with the choice of buying...

I'm new to FreeNAS but had been using Plex for about 5 years until about 2 years ago, when my old NAS stopped supporting the latest version of Plex. I've also used *nix computers since the late 1970s, but only returned to BSD when I started using FreeNAS. I started following "Installing Plex...

How do you give your plugin jails permissions to storage? Not trying anything fancy -- out-of-the-box-GUI FN11 warden jail w/NC10 (via plugin). /mnt/tank/music is setup in a NC jail storage to /media/music and NC has local storage setup so the music folder mounts /media/music. Yet, when I...

Hi all, Been working with Freenas for about a year now maybe. I have some questions i saved up: 1. I have 16gb of memory I run Plex / nzbget / sonarr / radarr / transmission / plexpy / webserver (spotnet) CPU: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 99.9% idle Mem: 53M Active...

So I've setup my Tranismission, ran it thru a private VPN, got it downloading from a private tracker... I opened up port 51412 (transmission default), and access the interface thru port 9091. Downloads work just fine. Settings for Transmission { "alt-speed-down": 50, "alt-speed-enabled"...

So 11.1-U5 removed the beta UI. Which means that creating and managing iocage jails simply through the UI is now out of the question. The Warden templates broke a while ago in a previous 11.1 update; so creating new Warden based jails is pretty broken too. So... is there really no alternative...

guys, I'm trying to create a Jail, but the system returns an error: [warden_exception: fetch: http://download.freenas.org/jails/11/x64/freenas-standard-11.0-RELEASE.mtree: No address record http://download.freenas.org/jails/11/x64/freenas-standard-11.0-RELEASE.tgz: No address record mtree...

I have searched and can't find a clear answer to my question. I notice when I ftp into my freenas build, [I have 3 mirrored zpools (zpool1, zpool2, zpool3)] if I navigate to the folders for the jail of sabnzbd (zpool2) it shows the contents and files in the downloads directory as full size...

I have the NextCloud plugin installed and set up to use storage in a dataset outside the jail, as shown in the attached Capture1.png. I see the same data within both the source and destination. I understand that data is not actually copied between these two directories, but the destination is...

HI, I am not too familiar on SSL certificates and would like someone of knowledge to help please. Wondering that if I generate an SSL certificate with the GUI (as per the video), can I then use this certificate pair in jails (i.e nextcloud and Emby) .. so I can have secure access to these guys...

How can I make a jail use a particular network interface? I set up a jail (using CLI because current GUI only supports warden and new GUI is buggy): iocage create --name testjail -r 11.1-RELEASE ip4_addr="igb2|10.0.90.16/24" defaultrouter=10.0.90.10 boot="on" host_hostname=testjail When I try...

This is related to the problem I posted here.. https://forums.freenas.org/index.php?posts/443033 I currently have some scripts running rsync to sync files in FreeNAS to another Windows machine. There are some problems and I need to upgrade rsync to fix it. My question is if I install latest...

Hi Guys. Listen what is stored in the jails? Like my jails folder is about 136BG big and I dont know what is stored in it. Location is: FreeStorage\MasterJails\usr\ports Location is: FreeStorage\MasterJails\usr\src (50GB) Location is: FreeStorage\MasterJails\usr\share (42.2GB) Location...