Hallo alle miteinander, Ich habe mir vor kurzem einen neuen FreeNas Server aus gebrauchten Teilen zusammengebaut. Jetzt habe ich das Verhalten, dass die Verbindung von meinem PC zu meinem Server (einigermaßen) gut funktioniert, anders herum sind Datenübertragungen allerdings extremst langsam...

What would the correct way to create a bridge for iocage VNET/VIMAGE to use on igb1? I'm currently doing the following which works but I end up with three bridges. Variable: ifconfig_bridge1 Value: addm igb1 up Type: rc.conf Variable: cloned_interfaces Value: bridge0 bridge1 Type...

== SOLUTION ALREADY FOUND (see below) :) == To become more familiar with iocage, I've been trying out a bunch of things using FreeNAS 11.1 that I installed under Virtualbox (Windows guest). FreeNAS VM network config: VBoxManage modifyvm "%VM_NAME%" --nic1 bridged --nictype1 virtio...

I have a bhyve VM set up in FreeNAS 11.1-RELEASE. The VM has been assigned two NICS (VirtIO), not used by FreeNAS. In the VM (pfSense) i have configured a failover LAGG (lagg0). My problem is, that the VM does not notice it when a physical NIC becomes unavailable (I detach it from the switch)...

Hello all and all, happy for posting my first post. As you can understand I am a noobie when it comes to FreeNAS, but I would like to change that. So any comment/corrections (both negative and positive) on what I am writing will be very very appreciated :). I am starting a project, while...

Hi, I am following freeNAS closely since few years back. The only thing that holding me to switch from server 2012/2016 to freeNAS is SMB Multichannel support. Can't afford switching to 10gbE yet but I can get 4x 1gbE nics for dirt cheap! Single gigabit link won't cut it... saturate fast on a...

So I am building a FreeNAS box for a contract job with the primary usage being a file-sharing and video edit storage machine. The plan is to have an Intel Quad Gig Nic that will be solely for direct connections to the two trashcan mac pros the editors are using. The MoBo port will be for...

Text is from Google translate, because my English is not so good... Hi, before I give it up and yet Synology or Qnap hole, a last desperate attempt here vllt. Help. My system is the -NAS - Basic 3.0 (2x WesternDigital Red 3TB, 8GB RAM) - with deviation at the motherboard since I have the...

Since I've upgrade to FreeNAS 11, no newly created jail can access the Internet anymore. I posted more details here. When comparing a working jail (created prior to upgrading to 11), ifconfig yields the following lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384...

I'm crossposting here as I realised, this might be more appropriate in the networking section. I so hope, somebody can shed some light on the issue as it currently renders FreeNAS mostly unusable for me. Hi everyone, I'm not a FreeBSD / Linux pro but hope, you guys can help me resolve an issue...

Hi everyone, I'm not a FreeBSD / Linux pro but hope, you guys can help me resolve an issue I'm having with jails being unable to connect to the Internet. I've been running my FreeNAS system for a while, having upgraded from FreeBSD 9.x via 10.x to 11.x. I've got a couple of jails (all from the...

Hi all, Sorry if this has already been answered, but I could not find it. I`m using FreeNAS-11.0-U4 (54848d13b) [updated from 9.3] and am trying to create a Windows 10 VM, which all works OK (the OS has installed OK, got networking and can use the VM). However, I have 2 NICs on my FreeNAS...

When I installed FreeNAS I am getting the following errors. alc0: link state changed to DOWN alc0 link state changed to up DHCPDOFFER on alc0 to 255.255.255.255 port 67 interval 8 alc0: DMA write error! --resetting DHCPOFFER from 192.168.1.1 It will keep going until it decides to give me a ip...

Hello all, I'm seeing a weird issue with my 10Gb adapters that I don't really know how to debug. I have the following setup: On Freenas I have an Intel X540-T2 adapter linked directly to my desktop using a good quality 10m CAT6e cable. The desktop uses the Intel X550 adapter onboard the Asus...

I built a new PC and went to access the Network and it asks for my username and wants my password. I forgot what I used for a password, is there a default I can try or a way to easily reset this password?

So i have been running Freenas 11 for about 1 month now. My setup is nothing special with a Ivy Bridge G3020 Dual Core, 8 GB DDR3, 3x2 TB Hitachi Used Drives and 1x1 WD Blue 1TB on a Z77 Mpower mobo. The problem i face is that my upload to the NAS is still 110 Mbps but my download from the NAS...

Hi everyone, I am completely new to FreeNAS and bought a preconfigured FreeNAS Mini XL through Amazon. I am struggling getting the system up and running. In the first system I received, one of the bays was not working and one of the enclosures could not be opened. iXsystems was very responsive...

Hello everyone, this is a long post, there is no tl;dr version. I wish to ask about some of the things i either was not able to find in manual or online or am not able to understand. I am using FreeNAS 11. A) SOLVED Currently i have an issue with Plex. I installed the plugin, added storage...

Hi all, I've been using FreeNAS on an old work PC for some years now with little trouble apart from the odd death of a HDD. However I will say my knowledge of FreeNAS has only ever been just enough to get it to work. Recently, after I had moved a different PC and made some cabling adjustments...

I have two network connections going to my NAS which you can find here https://pcpartpicker.com/b/K3zMnQ. I am looking to to restrict the ability to log in to freenas to the network connection that is connected to my editing station. This way other people on the network cannot find the FreeNAS...

So I have two problems: 1: After upgrading to 11 virtualbox vms wont start anymore. I only get this error message: "The virtual machine '2dts' has terminated unexpectedly during startup with exit code 1" 2: Using bhyve I managed to get a win 10 vm working but even though i installed the virtio...

I am running freenas on a ibm x3650 m3 that has 4 1gb Ethernet ports.. how does one assign nextcloud its own nic? When go to the networking settings in jails for nextcloud the NIC settings are grayed out..

I was messing with HTTPS trying to get the WebUI access from outside of my network. Well, that didn't work and it locked me out basically, so I was able to use shell to revert it to HTTP. Now, I can't access the WebUI from the local ip of 192.169.0.33 but I can access it from publicip:81 (HTTP...

Hi all, After much reading of the docs and forums, I finally have FreeNAS 11.0 going (hardware config at end of post.) I've discovered what I think might be a bug, but I thought I'd ask here before filing a bug report. Please note that this is all on a fresh install. Also, please note this is a...

Greetings, I've managed to install a Linux Mint vm with bhyve in Freenas 11 and it is able to access the internet. Next I installed ArangoDb on the guest OS (Mint) and would like to be able to access it from other machines on my network. I assume this requires some sort of port forwarding...

Hello, Im wondering if anyone could help me figure out a problem i've been having with some but mostly one jail... My server is currenlty connected via a managed switch to the router with a static ip. nameservers set to 8.8.8.8 and 8.8.4.4 default gateway set to ip of router. the server...

Just ordered in 3 Seagate 2tb hard drives and have dropped them into a Raid-Z config. Been trying to copy from my external HDD over to them to repopulate my media collection on the server, but every time I do, it seems like there's some critical error. The first time I tried plugging the...

Enter an option from 1-14: 1 1) em0 Select an interface (q to quit): 1 Delete existing config? (y/n) n Configure interface for DHCP? (y/n) n Configure IPv4? (y/n) y Interface name: (press enter as can be blank) Several input formats are supported Example 1 CIDR Notation: 192.168.1.1/24 Example 2...

Subject says it all. Updated to 9.10.2-U2 and could no longer find server at its static address that had been set for the LAGG in network settings. Checked my ARP and DHCP tables on the router and found 2 IPs under the dedicated server subnet and was able to log-in and change settings back to...

Hello Again, I'm still learning with FreeNAS and I'm kind of up and running but I'm having some issues with transfer speeds. I used to get around 90MB/s when copying over ethernet and 25ish over wifi. Now I don't know what's changed but I'm getting 30MB/s over ethernet and kB/s over wifi...

Hi I have spent all day trying to set up an FTP server on my FreeNAS without success. I would really appreciate some help, i'm a beginner to FTP and networks so please start with the simple problems and explain in detail when possible. In short my goal is to share many/large files in a simple...

Moin Moin, Ich benutze seit ca. 3 Jahren FreeNAS. Seit dem Update zu läuft es nicht mehr ordentlich. Mit längeren Laufzeit verlieren die Jails teilweise die Verbindung zum Netzwerk. FreeNAS als Host verliert diese jedoch nie. Auch ein Rücksprung auf 9.10.1-U4 hat nicht geholfen. Kennt...

I recently installed a new intel network card in our freenas server. Upon enabling it in the web ui I immediately lose connection to the UI and cannot access any of the shares. The motherboard ethernet port is still enabled and was assigned a static ip. This had happened previously and I tried...

Hey guys, I'm fairly new FreeNAS and networking. I ran into some trouble: I don't have access to the router in my building, but have access to the Ethernet port in the wall. Ultimately, I would like to have remote access to my Plex, but I don't have access to port forwarding for 32400. I did...

Hello All, I have a new storage build with following spec below , The storage serve as cifs nas and iscsi for XEN 3 hosts hypervisors. The pool is built with 2x8 Disks per each vdev , each vdev is Raid-Z2 Pool where divided to 3 zvol's 4TB each for iscsi Xen network , and one Dataset of 18TB...

Hi! I need advice regarding proper network settings for my FreeNAS. Currently its on the same network as my other devices. I need the FreeNAS to be on a different subnet to avoid packet routing issues when I connect to it directly from my PC via Ethernet patch cable (direct connection) and surf...

So to start off with I'm having problems connecting to FreeNAS via the web GUI on my NAS. I've tried setting the EFI and IPMI we settings back to defaults and neither has resolved my FreeNAS connection issue. I've got 2 Ethernet cables one plugged into the IPMI port and one plugged into the LAN...

Bonjour Pour optimiser la bande passante je souhaite configurer les deux ports Ethernet Gigabit de mon FreeNAS en lien LACP (j'ai un switch Ubiquity en face qui le gère). Par contre je reste dubitatif par les explications du manuel: Il est dit, je cite: Before creating a link aggregation...

Hi All, I've got a FreeNAS box setup up on our netowork. When it was first installed it got an IP off the DHCP which was fine and it worked great. Had connection and could access the web console. On the FreeNAS we wanted to set a static IP so we did following the instructions setting the IP...