I have a NetApp DS4243 shelf with a lot of hard drives and they all show up with blinky green lights but two drivers are having issues.
I use SATA to SAS backplane adapters, and when the drive is dead or disconnected, the adapters show up as devices of 0 bytes and with a throwaway serial number...
I should note that despite this error, my system boots and is otherwise running normally. Should I just ignore this or is this a problem?
(Build Date: May 10, 2019 21:33)
Intel(R) Core(TM) i3-6300 CPU @ 3.80GHz (4 cores)
As as long time 9.10 user I recently made the jump to 11.2 One of the features I've long anticipated trying is the built in support for VM's
-Intel(R) Xeon(R) CPU X5675 @ 3.07GHz (24 cores)
-240GB SSD for VM/Jails
Have to say, it's been a mixed bag with how well...
Hello FreeNAS Community,
First let me say thanks to the whole FreeNAS community for making and supporting such a great product. So Thanks.
So today I tried to create a Jail like I have a pile of time before, however, this time I got an error. I have not made any significant changes that I can...
First I hope that I’m in the right sub thread so if I’m wrong please correct me…
Background story is, that I have two plugins (Plex and Emby) installed on my FreeNAS 11.2 Virutal Machine (I run a FreeNAS Server on a real Hardware on 11.1 U7 but want to test the "new" system...
I updated Freenas from the web gui from stable 11.1 to stable 11.2 and now the system won't boot.
It seems to spend a while here:
Before ending up with:
My knowledge of linux is limited to any help would be great. In particular how screwed is my data?
EDIT: seems like I...
This is a completely new install, and my first time deploying FreeNAS. First thing i went to do was plug into my existing AD server and got an error following this guide: https://ixsystems.com/documentation/freenas/11.2/directoryservices.html#active-directory .
When i ping the domain name from...
I've been trying to upgrade to FreeNAS 11.2 for quite some time now, but can't get it to work.
After updating through the Web UI the 11.2 boot environment is stuck at a blank screen, only displaying 'Booting Normal Bootup'. I also tried to upgrade by flashing the installer to two different...
I have a really strange problem and after some pointers on how to fix it or even how to start to diagnose it! I have two FreeNAS servers setup on my home network as follows:-
Freenas 11.2 , internal ip 192.168.1.2, running webgui on port 80
Freenas 11.1, internal ip 192.168.1.20, running...
Long time Freenas user and I recently updated my Freenas server from 11.1 to 11.2 and now I'm using the new GUI and the new plugin/jail system. I was trying to migrate and build a new Plex server but I am noticing it and all other plugins I build out, I am unable to access from my...
I'm currently running FreeNAS 11.2-RELEASE. I tried to install the update that's available and I get this error message "Cannot remove file /usr/local/lib/perl5/5.26/mach/CORE/handy.h". I'm new to FreeNAS and could use your guys help on this, what do I need to do so that I can get my FreeNAS to...
I upgraded to 11.2 recently and created a new jail, to house a self-installed Plex instance.
I gave it one mount, to a parent directory which internally has the folders set up as desired.
FreeNas mount location: /mnt/OnePower/saidar (saidar is a child datastore of the root datastore OnePower)...
Hallo, ich habe ein Problem mit einem neu aufgesetzten FreeNAS 11.2 und als Plugin installiertem Plex 11.2-RELEASE-p8. Ich kann zwar vom PC und der Plex App auf den Server zugreifen, aber weder mein Smart-TV (für Videso und Bilder) noch meine Stereoanlage (für die Musiksammlung) sehen den...
Hi all. I recently rebuilt my system and installed 11.2-Release and then upgraded to U1.
After the initial install I was struggling with some of the changes in the GUI so I moved back to the Legacy Interface to get things going. One thing I am finding I have a problem with is my scrubs. I...
im still testing/learning FN and various configs. but here are some benchmarks i made (mainly for myself, so sorry for the obnoxious pict size)
(im only testing SYNC=ALWAYS writes and tests are run from a separate machine with a single direct 10gbit (dac) to this FN machine, both are...
I have the following problem:
I can't install the latest 11.2 release cause of an "kdb_enter +0x3b: movq" error. On the attachment you can see more details.
I'm using an Asus Z10PE-D16/4L motherboard with two Intel Xeon E5-2620 v3 @ 2.40GHz and 96GB ECC DDR4 RAM
With other operating...
I've been using replication tasks for some time, but thus far always used the manual setup, which was/is working flawless.
It's vacation time and I decided to try out the semi-automated replication setup but can't get it to work. Upon save I always get: Failed to connect to remote host ws://<<<...
I'm looking to accomplish two things:
1. Upgrade from FreeNAS-9.10.2 to version 11
2. Move from my single USB boot drive to a dual SSD's ( Mirrored )
My Freenas hosts a RAID-Z3 Pool, which I mostly use as a home share for some windows machines.
What will I need to do in order to make...
Hi everyone. When creating a jail in FreeNAS prior to 11.2, it was very straightforward using basic mode to assigning a static IP. In 11.2, I have options to choose VNET, Berkeley Packet Filter and IPv4 Interface. If all I want to do is to mimic the old jail configuration to simply set a...
Всем доброго времени.
Как-то забивал на эту проблему и виртуалку держал под другой ОС. Но все же вопрос - есть ли жизнь под FreeNAS vm.
Можно очень много выкладывать вводной информации, но не факт, что пост и без того будет кому-то интересен, в принципе. Может люди просто особо и не смотрят в...
Buongiorno a tutti,
after the update of the system to the 11.2 version I have noticed a increase on the HIT RATIO of the ARC Cache. I'm happy of this, but I'd like to understand the reason of that!
The orange line is the size of the cache, the light blue one is the hit ratio.
My FreeNAS server has a Highpoint Rocket 750 HBA. In the past I used a warden jail to install the Highpoint WebGUI/CLI for configuration and monitoring, which worked very well - and still does as warden jail under 11.2. I now tried the same method on 11.2 with iocage, but I'm unable to get it...
I just updated Freenas server from 11.1-U6 to the new 11.2 version. Everything went smoothly and I saw in the release notes that the new iocage jails are default now. So I decided to redo my Plex jail. One thing that confuses me about the new interface is where do I find the MAC address for my...
I want to be able to know for sure if an update have made its way to the repo so i could update my plugin in FreeNAS 11.2 release. coming from 9.10 i never got a problem with updating a plugin.
As per the docs: http://doc.freenas.org/11.2/plugins.html#update
when i check on available...
Just a shout out there to see if anyone else has had the terrible experience I've had on my iMac Pro trying to write files to my SMB share. High Sierra worked fine on my old Mid-2011 Macbook Pro, but on iMac Pro/Mojave writing to the share is a miserable, stop/go experience that usually ends in...
Buongiorno a tutti,
I have change the train and trying to search the new 11.2 (I'm in 11.1-U6), but it shows me only 11.2-RC2. I have also tried to reboot the system but nothing has changed.
I think that there is somekind of caches for updates. How can I wipe it?
Thanks in advance! ;)
Hi, I just upgraded to 11.2 and everything works fine. Now, since the plugins of 11.2 a newer then 11.1 I'd like to port them to the new system. (Also having everything on one dashboard is a plus) Is there any (easy) way to get those settings (Jails, user, directories) from 11.1 somehow to 11.2...
What is the simplest way to configure permissions for 11.2? I tried a few things out in RC2 and it was trickier than expected.
I will have multiple plugins, multiple jails, and multiple SMB shares all pointed at the same media with combinations of read-only as well as read/write.
Hi im not able to change Settings like auto-boot in the newest 11.2 rc2 ui for my jails that i created in 11.1 because the save changes Button is grey and not clickable.
If i create a new Jail in 11.2 it works fine and i`m able to change settings in the UI. But even if I update my 11.1 Jails to...
I am new, so please don't get annoyed if I explain this wrong.
I created a Boot USB with the ISO for the 11.1 (Also tried the 11.2 RC) using rufus 3.3. I am building a new NAS for our small company currently using a synology 1817+ (Slow IOPS and write speeds).
The NAS Hardware
I am having trouble getting openvpn working in 11.2.
It was running in 11.1, but after the upgrade - it stopped, and now I cannot reinstall it again.
This is a guide I am trying to put together (from many different sources), if I should need to do it once again - and hopefully after I have...
I tried updating to 11.2-RC1 from 11.1-U6 yesterday, but it failed miserably with multiple errors starting with Middlewared not starting after 4 minutes. So, I tried a clean install of 11.2 and restore my config from 11.1. 11.2 installs successfully, and everything looks good. The config...
Hi at all,
like the title states, ist the Plugin gone for RC-1 or simply not officially available yet? If so, any hints where I can get informed about the official development of the NetCloud Plugin?
Also the new updated doc doesn't say anything about nextcloud.
I just did a update from 9.10 to 11.2 but the system would not boot. It looks like I am getting the below error when it tries to start. I am booting from a USB drive.
gptzfsboot: error 32 lba 1
error 1 lba 1654253898819624
failed to clear pad2 area of primary vdev
failed to read pad2 area of...
I added a new zpool and wanted to use it for my jail storage. I don't believe there is currently a way to do this in the new UI. The docs don't say much more than this bullet point:
iocage automatically uses the first pool that is not a root pool for the FreeNAS® system.
Anyway, I didn't care...
I cannot start my VMs due to the error "Cannot guarantee memory for guest id: (number)".
My system has 32GB of RAM, so I believe I have plenty for the VM. I've tried going down to 512 MiB, but I get the same error.
I'm wondering if anyone else has encountered this error and has a solution for it?
I have setup a FreeNAS system in esxi with an HBA passed through. At times I see the memory spike to consume all 35 GB of RAM (looking at the reporting tool), and during this time the system is completely unresponsive. SSH, HTTPS, Network Sharing, Shell access all do not work while the...
please, can you explain me if freenas 11.2 from the stable train is safe for production use?
I don´t understand why there is first a beta-version you have to install and from this beta-version you can switch to 11.2-stable train and do an update. Is this update then beta too or is that...
I thought I'd give 11.2 a try, and move some of my warden jails/plugins to iocage, for the most part it's gone well, but I cannot install the sabNZBd plugin, it fails with the error
[priority,] message string
and the more info option gives:
nach dem sich die Probleme mit dem Update auf 11.1 U5 häuften wollte ich Nägel mit Köpfen machen und habe die 11.2 mit Hilfe des systemeigenen Updaters eingespielt und nach einem Reboot das neue System auf aktiv und booten gesetzt.
Seit dem leuchtet zwar die Powerleed aber der...