Monitor /var/log/messages for MCA related messages and email them to you when found. MCA messages contain, for example, memory ECC error reportings and much more.
More details: https://en.wikipedia.org/wiki/Machine_Check_Architecture
TrueNAS / FreeNAS expects people to use...
How can i fix this long serial at this moment i can't disable the smart on my usb so it won't start seen image
error text if i want to disable smart Ensure this value has at most 30 characters (it has 120).
who can help me
This morning I received this message from my FreeNAS. Any ideas on what is happening? Or how I should investigate and resolve the issue?
kernel log messages:
> (da4:mps0:0:20:0): READ(16). CDB: 88 00 00 00 00 01 50 c1 7e 60 00 00 00 40 00 00 length 32768 SMID 248 terminated ioc...
The question can seem naive, because it is... ;)
I have 2 FreeNAS, NAS-A, and NAS-B which replicates everything everynight from NAS-A.
It uses rsync tasks on NAS-B, with the 'root' user.
As passwords are the same (or is it because I have setup ssh with RSA via cli ?), it runs without user...
Jumping into FreeNAS-11.2-U5 totally blind and I have no idea what's causing this error to display for accessing the plugins menu on the web interface.
I can't seem to find a solution on the manual or forums so I decided to post to see if you wonderful people can put me in the right direction...
Recently this error has been displayed on my freenas control panel, someone would know how to fix this error and where it came from.
The error :
Device: /dev/ada0, Failed SMART usage Attribute: 194 Temperature_Celsius.
I have fresh installation of FreeNAS-11.2-U5
Trying to create new pool:
5 disks, raid-z (this whole nas is backup co z1 is enough for me)
after confirming that all disks will be erased, the procecure ends with following error:
Trying to setup a dropbox sync for the first time using the System Cloud Credentials and Cloud Sync Tasks method outlined in this blog post (https://www.ixsystems.com/blog/dropbox-with-truenas-or-freenas/). I have it partially working but am getting an error that I don't know how to...
I've had a particular share working for over a year at this point that has a slightly non-standard configuration. I've setup a share called scans that has a default user and group of printer and scanners respectively and shows the following ACLs on the FreeNAS system:
I keep getting the error "[EFAULT] Exception: CallError:[EFAULT] pkg error: - pkg-static: /var/db/pkg permissions (0777) too lax Please check your network occured, destroyed plex." any time I try to install plex on freenas 11.2-U2.1
How do I fix this? I have been having problems with plex...
I am very new to FreeNAS and I have no idea if this error is because I messed something up or something else. Trying to install any plugin results in this error " [EFAULT] Exception: CallError:[EFAULT] pkg error: - pkg-static: /var/db/pkg permissions (0775) too lax Please check your network...
I have freenas 11.2 on a pc with a fx 8370 and an Intel EXPI9301CTBLK PRO1000 network card .. I tried to install plex .. however while it installs after the window with the percentage that says at what point is the installation ... brings me to the login with the installation window in...
I have the following problem:
I can't install the latest 11.2 release cause of an "kdb_enter +0x3b: movq" error. On the attachment you can see more details.
I'm using an Asus Z10PE-D16/4L motherboard with two Intel Xeon E5-2620 v3 @ 2.40GHz and 96GB ECC DDR4 RAM
With other operating...
A couple days ago I installed my first Freenas on a assembled PC.
There are not problems except on a scheduling of Cloud Syncs.
I'm using version: FreeNAS-11.1-U6.3
When scheduling a Cloud Syncs with Azure Blob Storage and I try to execute task manually, there are not problems.
I get a zpool I/O error on my RocketRaid volume which are 4 Samsung EcoGreen 1,5TB disks on my Highpoint RocketRAID 2310.
A while back i get the status:
A few hours later I get the message:
And now I have the Alert:
I have read some forum posts and tried to import the zpool but...
We just got our new NAS online. It's a monster 48 bay 4U beast of a machine with dual xeon's, 32g of ram, and 10gbe cards using DAC to our kvm servers. It's running FreeNAS-11.2-RC1 and for the most part everything is doing great, we have a big ol' pool setup for the kvm servers, and another...
Hello, I have a FreeNAS 8 setup that I plan to migrate soon. It ran into a scheduled scrub yesterday and during the scrub, it is finding a lot of 'MEDIUM ERRORs' on two disks of my zpool. My first instinct was to replace both of these disk but when I checked zpool status, the scrub is still...
I am pretty new to FreeNAS. I'm having a problem setting up snapshots, they don't seem to be doing anything. On the snapshot list page, all it says is "An error occurred", there is no error number or details.
I setup the snapshot to run recursively, once every day, and retain for 2 weeks. I...
I had a hardware change and all was well. I started getting a cam error. After searching the forums, I have replaced the SATA cables, tested without the drives. Still have the cam error. Used a different flash drive. Same cam error. Bought a new flash drive, fresh install. Bam! no issues...
I cannot start my VMs due to the error "Cannot guarantee memory for guest id: (number)".
My system has 32GB of RAM, so I believe I have plenty for the VM. I've tried going down to 512 MiB, but I get the same error.
I'm wondering if anyone else has encountered this error and has a solution for it?
I absolutely KNOW the password, and have checked my memory from a written record.
But the webgui won't let me log in using that password at all.
It doesn't chuck ANY error message at all. It just refreshes that page so I am again presented with a blank username/password box to complete.
Hello! Trying to update from 11.1-U4 to 11.1U5 got Unable to create boot-environment 11.1-U5
Here is full exeception log:
Software Version: FreeNAS-11.1-U4 (89e3d93bc)
Request Method: POST
When installing FreeNAS 11.1-U4 on the Apple Xserve 3,1 I'm getting the attached error right after boot:
ACPI BIOS Error (bug): A valid RSDP was not found (20170728/tbxfroot-369)
panic: running without device atpic requires a local APIC
After searching online it seems IBM servers sometimes have...
I have loaded Freenas on two SSDs and get a degraded message in the GUI. If I load Freenas on to each drive separately the system shows healthy. Is there something I am doing wrong, should I try to mirror the drive after the first drive installation?
Hi, I need help I get this error.
Request Method: POST
Request URL: https://192.168.0.224/storage/volumemanager/
Software Version: FreeNAS-11.1-U1 (f7e246b8f)
Exception Type: MiddlewareError
[MiddlewareError: Unable to GPT format the disk "nvd0": gpart: geom 'nvd0': File...
I am running RaidZ-2 on 8 encrypted and non-deduplicated drives, and 1 SSD used as a SLOG. I attempted to remove this SSD for use in as a L2ARC and utilized the Web-UI to do so. I went ahead and removed only the SSD via the "Pool Status" page and all seemed to go ahead well. I attempted to...
Hello, I've got a FreeNAS server running and it has been going for a few years and happily providing iSCSI storage to some VMs.
The problem started off when I got an email stating no space left on device:
lockf: cannot open /var/run/periodic.daily.lock: No space left on device
Couldn't find a thread that was explaining the same issue, but here it is. Everything was working fine, nothing was modified or changed, but now I am unable to modify anything with regards to groups or users.
I have tried (through the GUI) to do the following, all result in a...
I am currently on FreeNas 10.0.4 or 10.4, and I'm trying to update to FreeNas 11 STABLE. Everytime I update, it applies it and then restarts, loads usb devices, and when it tries to connect to the database:
It says: /data/freenas-v1.db unable to open database file then a whole bunch of...
I have some 10 scheduled scrubs (default setting, 35 days) that were working fine with 11.0-U2 but started emailing me errors after updating to 11.0-U3, errors that also persist with 11.0-U4.
What is strange is that the weekly scrub for the boot drive is working fine. The other scrubs send me...
Trying to install on my first NAS and struggling.
Got a HP ProLight Microserver and the Freenas iso on a USB to install it to a SSD BUT IT always stops at this point and I have no idea why.
When I installed FreeNAS I am getting the following errors.
alc0: link state changed to DOWN
alc0 link state changed to up
DHCPDOFFER on alc0 to 255.255.255.255 port 67 interval 8
alc0: DMA write error! --resetting
DHCPOFFER from 192.168.1.1
It will keep going until it decides to give me a ip...
I did a fresh install of FreeNAS v11 on an SSD, and then did the autoupdates to 11U3, and then restored my settings from v8.3.1.
To protect my data, I have left all my data disks disconnected.
I then swapped my motherboard (original was a G620-2 Cores/2 Threads, New MB is an i7-3770, 4 Cores...
I randomly keep receiving the error: "You must configure a default route (Network->IPv4 Default Gateway)" when I try to enter my Jails menu.
The way I can get around this error is to go to Network->Global Configuration, and just click "Save" without making any changes as I already have...
I was copying data to a SAMBA share on my FreeNAS server. The server locked up and would not respond. I reboot it and upon the reboot discovered that the volume status is unknown and will not import. I am not certain what this means or what to do to recover from this. I have tried a couple of...
Just experienced a kernel error which took down my server. Looks to be related to SMB (which figures as I was shifting a load of data around via Windows shares at the time).
Error message is on the final line in this screenshot.
Done some Googling on the error message without any luck...
I'm getting problem with bacula plugin, first I had problem with FileStorage, after replace all jail=jail with jail_path=jail_path in /usr/pbi/bacula-sd-amd64/baculaUI/freenas/views.py I was able to create a FileStorage, but now when I try to delete anything like a Daemon or...
Just wondering i am moving data around to free 2 x 2 TB drives as I get another 2 x 2 TB and want to use them as raid ? 1 drive for redundancy.
However, I have 2x 1 TBdrives working a s a mirriopr and copy some more important data on them and got that message below, wondering if all is OK...
I recently tried to upgrade my Nas to the most recent update. Now, admittedly it wasn't very smart of me to try to do that when I only had remote access so that's on me. With that being said, something went wrong and ever since that and then also hasn't been building properly from what I can...
I had posted on the FreeNAS subreddit, but didn't get much help so I'm here. This was my post, since it's still the same issue I'm dealing with :
I've had trouble getting into FreeNAS 11.0 after burning the ISO to a CD, then I installed the CD onto a 16GB USB drive. The USB drive is visible in...
I'm new to FreeNAS and iSCSI in general. Running FreeNAS 11, I created the iSCSI pieces, and I was able to successfully connect to it from Windows 10 (saw the volume in disk management, didn't format or anything else). When I try to connect to it from my ESXi host, though, I get a warning...
I'm trying to report a possible bug at Samba.org: some combination of settings in my smb4.conf is giving the following error in /var/log/messages:
"Jun 26 18:15:45 svr smbd: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function"
The server is...
Tutto è andato perfettamente senza problemi per un mesetto, ma adesso, ogni volta che provo ad avviarlo mi da questo errore, e non capisco se sia perché la chiavetta sia compromessa o se per qualcos'altro.
Qualche suggerimento? Grazie
Errore: vedi file allegato.
I have a FreeNAS that last successfully backed my and my colleagues Macs up last night. Today however I found out that it has shut down, the only thing it showed was:
May 22 13:50:35 freenas afpd: out of asev slots
May 22 13:50:35 freenas afpd: out of asev slots
May 22 13:52:49...
I'm running FreeNAS-9.10.2-U3 (e1497f269) and recently I started getting this message:
The capacity for the volume 'freenas-boot' is currently at 96%, while the recommended value is below 80%
My boot is on 16GB USB (mirrored) and I only have one boot instance, so I don't understand...
I'm new to the server world, but I'd like to get more into it. I recently picked up this used Primergy RX300 S6 server (Intel Xeon E5506, 16GB RAM). It runs and all that and got FreeNAS installed, no problems. Now, the server came with four SAS drives configured in some sort of RAID array...