Single Controller, Serious Storage.

TrueNAS R-Series appliances are single-controller TrueNAS Enterprise systems for file, block, and S3-compatible object storage. The R20 and R50 are hybrid flash and disk systems, and the R60 is all-flash NVMe. They fit backup repositories, file servers, research data and AI pipelines that can tolerate a short outage. OpenZFS verifies each block against its checksum when it is read and repairs bad copies from redundant data.

TrueNAS R50

Home » TrueNAS Enterprise » R-Series

The TrueNAS R-Series

Hybrid or All Flash

Hybrid or All Flash – Easily Integrate into Existing Workflows

Broad Range of Applications

Engineered for a Broad Range of Applications

Data Protection

Cost Optimized for Non-HA Applications
 

Award-Winning Support

Award-Winning Enterprise Support
 

New: R60 delivers 400 Gb/s performance for AI and Business Analytics

No Frills, Just Results.

The R-Series is a single-controller storage workhorse that delivers performance and data integrity suitable for enterprise workflows.

 

Powered by the TrueNAS Enterprise Data Platform

TrueNAS R-Series

Which R-Series fits

If you need Look at Why
A compact hybrid system for backup or file shares R20 2U head with 12 × 3.5" bays, grows with expansion shelves, up to 8 GB/s
Dense hybrid capacity in fewer rack units R50 4U head with 48 × 3.5" bays, grows with expansion shelves, up to 10 GB/s
All-flash throughput for AI, analytics or video R60 1U head with 12 NVMe bays, up to 60 GB/s, networking up to 400GbE

Raw vs usable capacity

Raw capacity is what the drives hold, and usable capacity is what remains after parity or mirroring. Effective capacity adds an assumed data reduction ratio, so check which number a quote uses. In OpenZFS, a RAIDZ2 group of N drives holds about N minus 2 drives’ worth of data and keeps running through two drive failures (OpenZFS RAIDZ documentation). Leave free space for growth as well, because storage systems slow down as they fill. Our edge storage guide and hybrid flash sizing guide walk through the math. Send us your usable target, protection level and network speed, and we’ll size the configuration in your quote.

HA boundary

R-Series is single-controller and doesn’t offer high availability. If a controller failure would stop your business, look at the dual-controller HA options on the F-Series (all-flash), H-Series (compact 2U), M-Series (hybrid) or V-Series.

Value Options to Meet Your Demands

Explore R20 up to 2.9 PB up to 8 GB/s

Max Capacity 2.9 PB
Max Throughput 8 GB/s
Max Drives Supported 132
Max Expansion Shelves 2
Appliance Height 2U–10U
High Availability No
Networking 2× 10/25/40/100 GbE,
2× 32Gb Fibre Channel
Certifications Veeam, HYCU, Commvault Ready

Explore R50 up to 5 PB up to 10 GB/s

Max Capacity 5 PB
Max Throughput 10 GB/s
Max Drives Supported 252
Max Expansion Shelves 2
Appliance Height 4U–12U
High Availability No
Networking 2× 10/25/40/100 GbE,
2× 32Gb Fibre Channel
Certifications Veeam, HYCU, Commvault Ready

Explore R60 up to 7 PB up to 60 GB/s

Max Capacity 7 PB
Max Throughput 60 GB/s
Max Expansion Shelves 2× NVMe or 4× SAS
Appliance Height 1U–17U
High Availability No
Networking 4x 25/100/200 GbE,
2x 400GbE
Certifications Veeam, HYCU, Commvault Ready

Trusted by Innovators Worldwide

NASA logo
Oak Ridge logo
Boeing logo
Activision logo
FOX logo

Explore Product Data Sheets & Customer Success

FAQs

What is TrueNAS R-Series?
TrueNAS R-Series is a family of single-controller TrueNAS Enterprise appliances for file, block, and S3-compatible object storage. They serve SMB and NFS shares, iSCSI and Fibre Channel block storage, and S3-compatible buckets from one OpenZFS system. The R20 and R50 are hybrid, the R60 is all-flash NVMe, and every system comes with contracted Enterprise support from TrueNAS engineers.

Is TrueNAS R-Series high availability?
No. Every R-Series model has a single controller, so a controller failure takes storage offline until it’s repaired. That trade-off keeps the cost down for workloads such as backup targets and archives. If you need dual-controller high availability, look at the F-Series, H-Series, M-Series or V-Series.

Which R-Series model should I choose?
Choose the R20 for compact hybrid capacity, starting from a 2U head with 12 drive bays and up to 8 GB/s. Choose the R50 for dense hybrid capacity, with 48 bays in a 4U head and up to 10 GB/s. Choose the R60 for all-flash NVMe performance, up to 60 GB/s and 400GbE networking for AI, analytics and video. A product specialist can confirm the fit.

How much usable capacity will I get from an R-Series system?
It depends on drive size, drive count, the protection layout and how much free space you keep. In OpenZFS, a RAIDZ2 group of N drives holds about N minus 2 drives’ worth of data. A 100 TB usable requirement with RAIDZ2 is well within the R20’s range, and your quote will show the drive count and layout that get you there.

Does TrueNAS R-Series support 25GbE, 100GbE and Fibre Channel?
Yes. The R20 and R50 include two 10/25/40/100GbE ports and offer two 32Gb Fibre Channel ports as an option. The R60 supports 25, 100 and 200GbE ports plus 400GbE. Dual 25GbE connections work on every model.

Does TrueNAS R-Series work with my backup software?
Yes. The R-Series data sheet lists support for Veeam, NetBackup, Acronis, Asigra and Nakivo. You can also replicate OpenZFS snapshots to a second TrueNAS system for an off-site copy.



Let’s Find the Right Fit

We’ll help you quickly identify the right solution, tailored to your workflow.