Job running for import zfs pools 15 min on each boot after upgrade from core

[dbrannon79]

That I haven't done. wasn't aware there was a update available. I will look at it this evening

 

[heisian]

yeah I assumed the other train was just a bleeding-edge beta train, but it’s vastly better. i think your problems will be solved!

 

[dbrannon79]

Good morning, I was able to upgrade last night to the new bluefin update. I didn't get the watch the bootup process but I received a fail notice to my email for each drive individually (one posted below as I have 8 drives in a raidz2 pool) but when I logged into the dashboard there were no errors. I will toy with it and see if these persist.

This is an automatically generated mail message from mdadm
running on TrueNAS-Main

A Fail event had been detected on md device /dev/md126.

It could be related to component device /dev/sdg1.

Faithfully yours, etc.

P.S. The /proc/mdstat file currently contains the following:

Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md126 : active raid1 sdg1[2](F) sdf1[1] sde1[0]
2095040 blocks super 1.2 [3/2] [UU_]
[>....................] resync = 3.7% (79552/2095040) finish=0.4min speed=79552K/sec

md127 : active raid1 sdd1[2] sdc1[1] sdb1[0]
2095040 blocks super 1.2 [3/3] [UUU]
[=>...................] resync = 6.3% (133056/2095040) finish=0.2min speed=133056K/sec

unused devices: <none>

 

[Daisuke]

I'm wondering if the ix-applications dataset is meant to be on it's own separate disk or pool

Definitely on a separate dedicated pool, running on dual SSD disks.

 

[heisian]

Definitely on a separate dedicated pool, running on dual SSD disks.

i have a bunch of low capacity ssd’s lying around… time to add those in as mirrors!