CRITICAL: The following multipaths are not optimal:

[Drk]

CRITICAL: The following multipaths are not optimal: disk4, disk3, disk5, disk8, disk1, disk2, disk7, disk6.

I am running FreeNAS-8.3.1-RELEASE-p2-x64 (r12686+b770da6_dirty). This is installed on 2 highpoint sgl2720 with 8 drives each. I can not find anywhere why this happens and what to fix's it. I can build a zfs pool and it takes and shows right in the gui but i get this alert. This also is a new install, moved the drives around raid cards. If this helps any, i just added a new card and 8 more drives the mulitpaths are only on the old drives but this is a new install and a new config. I am at a loss for this. any help would be great.

Rodney

 

[Drk]

Ok, after lots of moving raid cards drives ect around, testing hardware. The multipaths seem to stop giving me errors after i commented them out of the boot.conf. It still shows them as mutlipath for some reason, one of cards and not the other i am at a lose right now. I am going to build a zfs2 raid and let me running and see what happens. I have half the disk showing up in gui now too other half no idea. Also when i build a volume it show them as disk and not as mutlipaths now too. If this helps anyone else. When i drop remove the volume i get the error again for half the drives.

Rodney