svenbravo7
Cadet
- Joined
- Oct 15, 2013
- Messages
- 3
Hello,
I have a question regarding the correct network settings for my jail in combination with my network settings.
My LAN network settings (as set in my router/modem):
DHCP range: 192.168.1.10 / 192.168.1.255
Router/modem: 192.168.1.1
FreeNAS: 192.168.1.2 (set as static via settings)
FreeNAS Jail: 192.168.1.3
Before I upgraded to 9.2 I already had a few issues that I would sometimes be unable to reach my Jail. But after I upgraded it is just unreachable 9/10 times. So I guess that it has something to do with my network settings for my Jail.
The network settings I have currently set for my jail (via FreeNAS GUI).
Jail Name
IPv4 address
IPv4 netmask
IPv4 aliases
IPv4 bridge address
IPv4 bridge netmask
IPv4 bridge aliases
IPv4 default gateway
IPv6 address
IPv6 prefix length
IPv6 aliases
IPv6 bridge address
IPv6 bridge prefix length
IPv6 bridge aliases
IPv6 default gateway
MAC
autostart
VIMAGE
NAT
Autostart is checked
VIMAGE is checked
NAT is NOT checked
After upgrading to 9.1 I already had to recreate my Jail and I did so with the above settings. These settings seems to be the most stable ones I was able to configure it.
But like I said after 9.2 even these settings stopped working. So my question is; what are the correct settings to get this Jail working on the 192.168.1.3 IP-address? It must have access to the internet and vice versa (I have some applications that need to be accessable, from work etc.)
Thanks in advance for any help. If you need to know more, please let me know!
I have a question regarding the correct network settings for my jail in combination with my network settings.
My LAN network settings (as set in my router/modem):
DHCP range: 192.168.1.10 / 192.168.1.255
Router/modem: 192.168.1.1
FreeNAS: 192.168.1.2 (set as static via settings)
FreeNAS Jail: 192.168.1.3
Before I upgraded to 9.2 I already had a few issues that I would sometimes be unable to reach my Jail. But after I upgraded it is just unreachable 9/10 times. So I guess that it has something to do with my network settings for my Jail.
The network settings I have currently set for my jail (via FreeNAS GUI).
Jail Name
IPv4 address
IPv4 netmask
IPv4 aliases
IPv4 bridge address
IPv4 bridge netmask
IPv4 bridge aliases
IPv4 default gateway
IPv6 address
IPv6 prefix length
IPv6 aliases
IPv6 bridge address
IPv6 bridge prefix length
IPv6 bridge aliases
IPv6 default gateway
MAC
autostart
VIMAGE
NAT
Autostart is checked
VIMAGE is checked
NAT is NOT checked
After upgrading to 9.1 I already had to recreate my Jail and I did so with the above settings. These settings seems to be the most stable ones I was able to configure it.
But like I said after 9.2 even these settings stopped working. So my question is; what are the correct settings to get this Jail working on the 192.168.1.3 IP-address? It must have access to the internet and vice versa (I have some applications that need to be accessable, from work etc.)
Thanks in advance for any help. If you need to know more, please let me know!