We hope you like it just as much as we do!
Download page:
http://sourceforge.net/projects/freenas/files/FreeNAS-7-Stable/
Upgrade Notes
=============
– Before upgrade you must always backup your configuration file, your
system disk and all your data (if possible).
– DO NOT use firmware upgrade if your installed FreeNAS revision is lower
than 0.7.2(5175).
– If your version is after 0.7.2(5175), you can upgrade it by any ways.
– If your version is lower than 0.7.2(5175), and you install by option #1
(no data in the boot disk), and there is space of at least 128MB in the
boot disk, you can upgrade it from LiveCD. Otherwise, a new installation
is necessary. (This procedure formats the boot disk.) And, you must
remove the mount point of the boot disk, and add it again.
Other Notes
===========
– The system requirements are changed. The minimum space to install:
OS disk: 128MB(120MiB), Mem: 384MB for embedded.
OS disk: 400MB(380MiB), Mem: 256MB for full.
Downgrade Notes
===============
– Downgrading from 0.7.2 to any version lesser than build 0.7.2(5726) is not
supported.
Release Notes for FreeNAS 0.7.2 (Sabanda) Stable rev.6694 – 12-06-2011
=============
Major changes:
– Upgrade to FreeBSD 7.3-p6.
– Upgrade unison to 2.40.61.
– Upgrade bsnmp-ucd to 0.3.2.
– Upgrade e2fsprogs to 1.41.14.
– Upgrade smartmontools to 5.41.
– Upgrade php5 to 5.3.6.
– Upgrade transmission to 2.22.
– Upgrade samba to 3.5.8.
– Increase image size to 72MB, mfsroot to 180MB.
– Increase default install size embedded to 120MB, full to 380MB.
– Increase default swap size to 256MB.
– Increase memory disk for firmware upgrade to 128MB.
– Create 4KB aligned data partition on the boot disk.
– Upgrade arcconf to 6.50.18579.
– Upgrade cdialog to 1.1.20100428.
– Set kern.hz=100 when running on virtual machine and kern.hz>100.
– Add virtual machine guest support (open-vm-tools/vbox-additions).
– Upgrade inadyn-mt to 02.24.36.
– Upgrade bash to 4.1.011.
– Upgrade istgt to 20110529.
– Upgrade msmtp to 1.4.24.
– Upgrade nano to 2.2.6.
– Upgrade gzip to 1.4.
– Upgrade tftp-hpa to 5.0.
– Introduce iSCSI boot/install feature (isboot 0.2.4).
– Upgrade 3ware driver to 9.5.3.
– Upgrade proftpd to 1.3.3d.
– Upgrade lighttpd to 1.4.28.
– Upgrade iperf to 2.0.5.
– Upgrade ataidle to 2.5.1.
– Upgrade nut to 2.61.
– Upgrade rsync to 3.0.8.
– Upgrade aac driver to 2.4.1.
– Upgrade iscsi to 2.3.1.
Minor changes:
– Add “Czech”, “Korean”, “Slovak” and “Portuguese (Brazil)” translations.
– Add multiple CPUs usage.
– Add AIO WebGUI for CIFS/SMB service.
– Remove /var/tmp symbolic link.
– Support Advanced Format 4KB sector. (UFS/GPT data partition only)
– Set fsck enable by default at Disks|Mount Point|Add.
– Set kern.geom.debugflags when formating.
– Modify Tuning values.
– Add ability to disable File Manager.
– Make three backups of configuration when writing new one.
– Add amdtemp module. (FR 2992462)
– Add ability to probe on-die digital thermal sensor.
– Enable disk quotas of kernel option.
– Remove a useless partition.
– Add ability to mount ‘a’ partition on MBR/UFS.
– Add variables to change upload directory of lighttpd.
– Disable fsck on MBR/UFS mount point due to 4KB alignment. You need
re-enable it after upgrading.
– Add wireless firmware modules.
– Add logical block length for iSCSI target.
– Add ability to disable/enable for iSCSI target.
– Add unused extents to the list in iSCSI target edit mode.
– Add kernel module directory (/boot/modules).
– Set Large read/write by default (Services|CIFS/SMB|Settings).
– Add crypto accelerator driver (hifn, safe, ubsec).
– Move upload directory to /var/tmp/ftmp from /ftmp.
– Change iSCSI initial parameter.
– Add new parameter of istgt 20100522.
– Add minimum set of zfskerntune feature.
– Add Hyper-V reboot issue patch.
– Add ZFS pool with 4KB sector support.
– Add ZFS cache and log device support.
– Improve parameters for Samba 3.5.x.
– Improve Active Directory support.
– Display Device model on ‘Status|Disks and Disks|Management’.
– Improve automatic firmware check “Embedded” installs.
Bug fixes:
– Fix wrong validation when WINS is enabled.
– Fix missing /var/tmp in full installation.
– Fix upload fail when firmware upgrade.
– Fix AIO checkbox is not disabled if samba is disabled.
– Fix fail to update index.php if some value is undefined.
– Fix control of Ctrl+Alt+Del if console menu is disabled (BR 2976816).
– Fix the document link on Services|Rsync|Server|Settings (BR 2997828).
– Fix fail to connect SSH if ActiveDirectory is enabled (BR 2821715, 2898371).
– Fix UPS support for Megatec USB UPSs fails (BR 3079159).
– Fix Unable to create ZFS datasets with . or / in the name by WebGUI (BR2934275).
– Fix Remote root vulnerability in exec_raw.php.
– Fix SSL/TLS, test e-mail did not work correct (BR3306572).
– Fix the usage of AFP service.
– Fix Blocklist functionality transmission.
Regards,
FreeNAS Development Team