Currently using 11.2-U5. I am having issues with one of my pools named "Volume2". There was a power failure and the system had shut down inadvertently.
Upon restart, the first pool (Volume1) works fine but only one disk on the on the second pool (Volume2) is detecting on the Dashboard which is...
Hi Team,
I have few queries regarding FreeNAS Storage. The volume we allocate in the pool is not showing the correct value. I have attached the screenshot in the attachment. Also, find the detail of the zpool list and zfs list. It also full all space. please suggest.
=================
zpool...
Hi everyone,
I have seen a lot of posts of this kind on the forum, and even if I've been through some of them, I unfortunnately didn't solve my issue :/
Here is my issue :
I have a Freenas running 11.1U6 version
I have only one big storage supposed to be sized at 6Tb, and never have I done the...
Good night people!
I made a big mistake in freenas.
I had created a storage system with two 1TB HDDs in stripe mode and everything was working perfectly. Later, on a certain day I added manually through the web / graphical interface 1 HD of 500GB and then another of 1TB. Freenas showed error...
I searched the forums, and haven't come up with an answer that makes sense. I'm hoping someone can shed some light on this.
I just created a new RAIDZ1-0 array of 4 6TB disks. I expected the total available space to be about 6TB x 3 disks = 18TB (one drive for parity, aka RAID5). Sure...
Sept. 16, 2018, 2:16 p.m. - The volume vol1 state is ONLINE: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected.
If I go to the disks tab all disks are healthy and everything is up and running fine. Where do I look...
Hi All,
This may have been asked before so forgive me if it has. I am fairly new to freenas so be gentle.
I have a server that has 4 x 4tb WD Reds set up in RaidZ2 (usuable 7tb) and I'm running out of space (roughly 2tb left). Given the amount of time it has taken me to fill up 5tb im sure it...
I really thought i understood computers reasonably well... until i started using freenas lol i guess my issue is with permissions, i installed syncthing and it ruined my other jails permissions and ive been trying to follow guides but they fail or dont react the same way as the guide says, and...
Hi,
I have this volume called HDD and I would like to extend it. There seems to be about 3TB of EXPANDSZ space, but I do not see an option to extend it.
If I can do anything to reduce fragmentation, any advice would be very welcome as well.
root@freenas:~ # zpool list
NAME SIZE ALLOC...
I have one volume I've named 'D'
I have two disks in this volume, one 1TB HDD, and one 2TB HDD.
My data takes up 1.6TB. I started with the 1TB HDD as that was what I had at the time, then I bought the 2TB HDD, and added to the system a month later for more storage. Now I'm realizing the error...
Hello all,
I have tried searching for help on this forum and many others but never really found a good answer for my needs.
I am running FreeNAS 11.1 on vmware 6.0. I Started out with a 2TB Disk for it months ago and now it is getting full. I picked up another 4TB NAS drive on sale and added it...
Hello all
I need some help. After updating to FreeNAS (11.0-U4) I started getting a strange error. When my box tries to mount my ZFS volume I get (KDB enter panic).
I will add a screen shot below.
I backed out to 11.0-U3 and am able to boot up no problem. Any ideas what may be causing...
I created a FreeNAS server for file storage and sharing. However, it seems that I may have set it up incorrectly. I did not create a dataset on the main volume and the shares are directly from the volume. The share volume is 2x 2TB drives in RAID1 and there is another 2TB drive I can use to copy...
Build FreeNAS-9.3-STABLE-201509022158
I'm having an issue with my Dataset after importing the volume. The problem occurs when I try changing the share type from UNIX To Windows. Here is the error message I am receiving:
Environment:
Software Version: FreeNAS-9.3-STABLE-201509022158
Request...
Hello guys,
What is the maximum size I can give for a dataset?
I created a 4T dataset to test, but the debian that is as a client can not read the that.
I have a Box account and want to set up Box Sync on my Mac. This Mac has a very small disk so I want the Box Sync folder to be on my FreeNAS. However Box Sync says "it can only write to an NTFS or HFS volume". Is there a way around this? If my Mac can write to the FreeNAS no problem, why can't...
Hey Guys,
I've had my FreeNAS setup for a few years now, but it's recently been claiming to have a degraded volume. When I check disks, one of my new disks is missing from the list. Then, when I restart the server, the disk is back. I get this problem every other week or so.
When I run a check...
Hello! I have been messing around with FreeNAS for a few months now. It's a solid product and has been working fairly well for me. I have had a recent issue with the flash drives I was using to run the OS on. The problem involved me losing all access VIA the web and console locking up. With an...
I tried to create a volume out of 2 x 500 GB hdds and get this from the window:
Request Method: POST
Request URL: http://192.168.100.64/storage/volumemanager/
Software Version: FreeNAS-11.0-U2 (e417d8aa5)
Exception Type: MiddlewareError
Exception Value:
[MiddlewareError: b'Unable to GPT format...
what I mean is, if I have an excising volume (data) mounted and in use with FreeNAS and now I create a new volume (newdata), is there a function, like the "import disk" function to copy the existing data from one volume to the other volume (newdata) on FreeNAS without going through the network...
Hi dear FreeNAS Friends,
hope to get better in asking my questions.
FreeNAS 11 is now running live and I have the hassle to get all data imported.
However, where in the GUI can I find which disks belong to which volume?
Hi freenas community
Is it possible to use 2x 1tb drives as a 2tb drive and also have 2x 2tb drives as well to be all put together to create a raid 5 volume?
Is this possible?
My system specs are:
Amd a8-7600
Asus a88xm-a
16gb Corsair ram
(Currently) 2x 1tb Western Digital Red drives (Buying)...
Fresh install of Corral. Created a volume and put all data on. Reboots though-out. Setup some docker hosts and containers - all worked fine. Shut down last night. When I turned on today, the volume is gone, all settings (inc. timezone, dashboard etc.) back to factory. user/pass still OK to...
Добрый день. У меня vmware машина на esxi 6.
стоит freenas 9.10 (последний) уже настроена и работает.
Добавил в виртуалку новый виртуальный HDD от другого луна (хранилища).
в volume manager делаю - добавить новый DATA - новое (Хранилище). не новый датасет (dataset)
система дает мне запустить...
Hi there,
I have been using Plex in FreeNAS 9.3 for about a year now and I usually do the settings through the GUI and I am not good with coding/script.
My current hard drives are ZFS: Volume1 - 1x3TB & Volume2 - 4x5TB (RaidZ1)
I am going to remove the Volume1 - 1x3TB and add another 5TB and...
Hello All,
I have a FreeNAS volume that is offline after an inadvertent server reset with "Error getting available space" and an alert message "State Unknown".
The configuration is:
FreeNAS 9.3 Stable running in VMware vSphere.
The volume consists of two VMware virtual disks that located on...
Hi everyone! I am brand new to this wonderful world of FreeNAS and I have some questions:
Suppose I have a USB device used as a media storage for my FreeNAS. But now I have decide to take it out of my FreeNAS server and plug it on another computer (a normal desktop computer, not running...
Hi,
I have freenas 9.3 working with 2x2TB WD RED.
Yesterday it stop working giving some strange error I read in other thread due to USB memory corruption. So I installed freenas (both versions 9.3 and 9.10) on new USB. It start correctly but after "IMPORT VOLUME" (old ZFS HDD) there are only my...
Hello,
I need to setup a FreeNAS server with 16 disks of 8TB. I would like to know what is the best way to configure my array, I need to have at least 95TB available for data.
Thanks.
Bonjour à tous,
je dispose d'un serveur 32Go de ram muni de
8*3To de HDD
3*1To de SDD
Si j'ai bien compris toutes les lectures que j'ai effectuées sur le forum, il est recommander d'utiliser les SDD pour améliorer les performances du futur NAS.
Ils seront donc utiliser en cache lecture et...
edit: The solutioion for my problem was to put all the drives in my main windows machine, format them all and unallocated them.
Also found out there was an old raid 1 on two of the drives.
I created a new volume today, turned out I only got one drive in it out of my 6 drives so I detached the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.