Grinas
Contributor
- Joined
- May 4, 2017
- Messages
- 174
Sorry for the stupid question but im confused as to which drives are actually degraded.
So long story short i just realized today that i have no gotten an email from truenas in about a year so decides to have a look at the storage to make sure everything is ok but I see 2 drives degraded.
I am confused as to which drive so its showing 9 drives in total listed so that means at least one must be no longer show/detect by truenas. Is the only way for me to find out which one is to get serials of all and open server go through them all?
The other drive that is degraded seems to be da2 which is an very old Toshiba drive but when i go look at the drive states i get "DISK TYPE" "UNKNOWN" for da6 so is da6 degraded too?
Mod note: external images removed
Attached is output of all drives
da1
da2
da3
da4
da6
I assume its da2 and another drive thats not showing that are degraded but why is da6 showing as HDD type "unknown"
So long story short i just realized today that i have no gotten an email from truenas in about a year so decides to have a look at the storage to make sure everything is ok but I see 2 drives degraded.
I am confused as to which drive so its showing 9 drives in total listed so that means at least one must be no longer show/detect by truenas. Is the only way for me to find out which one is to get serials of all and open server go through them all?
The other drive that is degraded seems to be da2 which is an very old Toshiba drive but when i go look at the drive states i get "DISK TYPE" "UNKNOWN" for da6 so is da6 degraded too?
Mod note: external images removed
Attached is output of all drives
da1
Code:
smartctl -a /dev/da1 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p6 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68EUZN0 Serial Number: WD-WCC4N0XP648R LU WWN Device Id: 5 0014ee 2640bcb11 Firmware Version: 82.00A82 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Aug 2 14:16:31 2023 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (40080) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 402) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 3 3 Spin_Up_Time 0x0027 188 180 021 Pre-fail Always - 5575 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 227 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 040 040 000 Old_age Always - 44452 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 227 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 226 193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 5068 194 Temperature_Celsius 0x0022 110 097 000 Old_age Always - 40 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 35590 - # 2 Extended offline Completed without error 00% 32877 - # 3 Extended offline Completed without error 00% 32853 - # 4 Extended offline Completed without error 00% 32783 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
da2
Code:
smartctl -a /dev/da2 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p6 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA300 Serial Number: X3V9SV5GS LU WWN Device Id: 5 000039 ff4d2885a Firmware Version: MX6OABB0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Aug 2 14:17:00 2023 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (22652) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 378) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 70 3 Spin_Up_Time 0x0007 150 150 024 Pre-fail Always - 365 (Average 398) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 586 5 Reallocated_Sector_Ct 0x0033 094 094 005 Pre-fail Always - 276 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33 9 Power_On_Hours 0x0012 092 092 000 Old_age Always - 60867 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 398 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1332 193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1332 194 Temperature_Celsius 0x0002 133 133 000 Old_age Always - 45 (Min/Max 13/57) 196 Reallocated_Event_Count 0x0032 093 093 000 Old_age Always - 307 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 120 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 153 153 000 Old_age Always - 1101 Read SMART Error Log failed: Input/output error SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 60410 - # 2 Short offline Completed without error 00% 60398 - # 3 Short offline Completed without error 00% 60242 - # 4 Short offline Completed without error 00% 60230 - # 5 Short offline Completed without error 00% 60026 - # 6 Short offline Completed without error 00% 60014 - # 7 Short offline Completed without error 00% 59858 - # 8 Short offline Completed without error 00% 59846 - # 9 Short offline Completed without error 00% 59690 - #10 Short offline Completed without error 00% 59678 - #11 Short offline Completed without error 00% 59525 - #12 Short offline Completed without error 00% 59513 - #13 Short offline Completed without error 00% 59285 - #14 Short offline Completed without error 00% 59273 - #15 Short offline Completed without error 00% 59117 - #16 Short offline Completed without error 00% 59105 - #17 Short offline Completed without error 00% 58949 - #18 Short offline Completed without error 00% 58937 - #19 Short offline Completed without error 00% 58781 - #20 Short offline Completed without error 00% 58769 - #21 Short offline Completed without error 00% 58565 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
da3
Code:
smartctl -a /dev/da3 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p6 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68EUZN0 Serial Number: WD-WCC4N6SS9F16 LU WWN Device Id: 5 0014ee 20e541427 Firmware Version: 82.00A82 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Aug 2 14:18:32 2023 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (40020) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 401) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1 3 Spin_Up_Time 0x0027 186 178 021 Pre-fail Always - 5666 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 257 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 028 028 000 Old_age Always - 52888 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 257 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 242 193 Load_Cycle_Count 0x0032 193 193 000 Old_age Always - 22445 194 Temperature_Celsius 0x0022 109 100 000 Old_age Always - 41 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 52767 - # 2 Short offline Completed without error 00% 52755 - # 3 Short offline Completed without error 00% 52599 - # 4 Short offline Completed without error 00% 52587 - # 5 Short offline Completed without error 00% 52431 - # 6 Short offline Completed without error 00% 52419 - # 7 Short offline Completed without error 00% 52264 - # 8 Short offline Completed without error 00% 52252 - # 9 Short offline Completed without error 00% 52048 - #10 Short offline Completed without error 00% 52036 - #11 Short offline Completed without error 00% 51880 - #12 Short offline Completed without error 00% 51868 - #13 Short offline Completed without error 00% 51712 - #14 Short offline Completed without error 00% 51700 - #15 Short offline Completed without error 00% 51548 - #16 Short offline Completed without error 00% 51536 - #17 Short offline Completed without error 00% 51308 - #18 Short offline Completed without error 00% 51296 - #19 Short offline Completed without error 00% 51140 - #20 Short offline Completed without error 00% 51128 - #21 Short offline Completed without error 00% 50972 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
da4
Code:
smartctl -a /dev/da4 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p6 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Purple Device Model: WDC WD30PURZ-85GU6Y0 Serial Number: WD-WCC4N7AY14Z9 LU WWN Device Id: 5 0014ee 265d1adc5 Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Aug 2 14:18:58 2023 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (39600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 398) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 190 182 021 Pre-fail Always - 5491 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 120 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 061 061 000 Old_age Always - 29072 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 120 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 118 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 647 194 Temperature_Celsius 0x0022 106 092 000 Old_age Always - 44 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 20214 - # 2 Extended offline Completed without error 00% 17496 - # 3 Extended offline Completed without error 00% 17472 - # 4 Extended offline Completed without error 00% 17402 - # 5 Extended offline Aborted by host 90% 17364 - # 6 Short offline Completed without error 00% 17179 - # 7 Extended offline Completed without error 00% 17137 - # 8 Conveyance offline Completed without error 00% 17129 - # 9 Extended offline Aborted by host 90% 17129 - #10 Short offline Completed without error 00% 17129 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
da6
Code:
smartctl -a /dev/da6 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p6 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Purple Device Model: WDC WD30PURX-64P6ZY0 Serial Number: WD-WCC4N6VVXV6T LU WWN Device Id: 0 000000 000000000 Firmware Version: 01.12B.3 User Capacity: 3,001,489,956,864 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) Local Time is: Wed Aug 2 14:19:24 2023 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 115) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (42300) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 424) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0xfc77 200 200 051 Pre-fail Always - 60 3 Spin_Up_Time 0xe455 223 218 021 Pre-fail Offline - 3808 4 Start_Stop_Count 0xe054 100 100 000 Old_age Offline - 105 5 Reallocated_Sector_Ct 0xf455 200 200 140 Pre-fail Offline - 0 7 Seek_Error_Rate 0xe455 200 200 051 Pre-fail Offline - 0 9 Power_On_Hours 0xec74 064 064 000 Old_age Offline - 26987 10 Spin_Retry_Count 0xd675 100 100 051 Pre-fail Offline - 0 11 Calibration_Retry_Count 0xac14 100 100 051 Old_age Offline - 0 12 Power_Cycle_Count 0xfc34 100 100 000 Old_age Offline - 105 184 End-to-End_Error 0xf477 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0xb414 100 100 000 Old_age Offline - 0 188 Command_Timeout 0xb436 100 099 000 Old_age Always - 1 190 Airflow_Temperature_Cel 0xac76 056 042 000 Old_age Always - 44 192 Power-Off_Retract_Count 0xa474 200 200 000 Old_age Offline - 104 193 Load_Cycle_Count 0xa476 200 200 000 Old_age Always - 0 194 Temperature_Celsius 0xc45c 106 092 000 Old_age Offline - 44 195 Hardware_ECC_Recovered 0xdc7e 200 200 000 Old_age Always - 0 196 Reallocated_Event_Count 0xbc74 200 200 000 Old_age Offline - 0 197 Current_Pending_Sector 0xe674 200 200 000 Old_age Offline - 0 198 Offline_Uncorrectable 0xfc7e 100 253 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0xc456 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0xbc57 200 200 051 Pre-fail Always - 28 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 30% 26986 4191536 # 2 Extended offline Completed: read failure 10% 18117 4198216 # 3 Extended offline Completed: read failure 90% 15402 4198216 # 4 Extended offline Completed: read failure 90% 15380 4198216 # 5 Extended offline Completed: read failure 90% 15380 4198216 # 6 Extended offline Completed: read failure 90% 15378 4198216 # 7 Extended offline Completed: read failure 90% 15308 4198216 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
I assume its da2 and another drive thats not showing that are degraded but why is da6 showing as HDD type "unknown"
Last edited by a moderator: