[How-To] ownCloud using NGINX, PHP-FPM, and MySQL

[tamilmad]

Hi, you can easily install owncloud on a freebsd vm according to this guid on corral. I have done so an everything works good.

Edit:
Just use the freebsd 10 template, not freebsd 12

I created a docker for Nextcloud. When Iaccess the same, I get an error as below.

Can you help to overcome the same

 

[ArgaWoW]

I created a docker for Nextcloud. When Iaccess the same, I get an error as below.

Can you help to overcome the same
View attachment 17729
View attachment 17729

You have to set the permissions for your data folder to 770 I guess

Gesendet von meinem LG-H850 mit Tapatalk

 

[Joshua Parker Ruehlig]

I have been busy the last few months and haven't kept up with the comments here.
so does 'occ upgrade' no longer work? I'm on nextcloud 11.0.1 currently.
Thanks

EDIT
I tried using the phar method and kept hitting issues. tried the occ method and it worked as expected

 

[ArgaWoW]

Hi Joshua,
Nice to see you back in this tread.
I want to ask you, if you find some time, can you please update your how-to at the first page with an working php7-apcu version.

This would be really great.

Thanks in advance :)

Gesendet von meinem LG-H850 mit Tapatalk

 

[Joshua Parker Ruehlig]

Hi Joshua,
Nice to see you back in this tread.
I want to ask you, if you find some time, can you please update your how-to at the first page with an working php7-apcu version.

This would be really great.

Thanks in advance :)

Gesendet von meinem LG-H850 mit Tapatalk

I think this command is what is needed.

Code:

make config-recursive install -C /usr/ports/devel/pecl-APCu

If this doesn't work maybe someone can tell me, thanks!

 

[NasKar]

I followed the directions by @KevDog on page 62 and everything worked great I can't renew my lets encrypt certificate in nextcloud. I get this error:

Code:

Attempting to renew cert from /usr/local/etc/letsencrypt/renewal/xxxx.ddns.net.conf produced an unexpected error: Failed authorization procedure. xxxx.ddns.net (http-01): urn:acme:error:connection :: The server could not connect to the client to verify the domain :: Could not connect to xxxx.ddns.net. Skipping.

In the past I didn't get an error if I ran /usr/local/bin/certbot renew --dry-run

Turns out I turned off port 80 forwarding to my server in my router as 443 was working with https. Letsencrypt need http: port 80 to renew. Hope this helps someone else.

 

[ArgaWoW]

I think this command is what is needed.

Code:

make config-recursive install -C /usr/ports/devel/pecl-APCu

If this doesn't work maybe someone can tell me, thanks!

Hello Joshua,

I have done a complet new installation with you command and it worked (I guess) I cant install php7-redis and I have trouble to get the cron job working (cron.php) I have installed nextcloud, not owncloud.

Can my cron-job-problem depend on the trouble with php7-redis? Also I get the message in admin screen "No php memory cache"

It would be realy nice if some one can help a little bit :)

Thank you

 

[Joshua Parker Ruehlig]

Hello Joshua,

I have done a complet new installation with you command and it worked (I guess) I cant install php7-redis and I have trouble to get the cron job working (cron.php) I have installed nextcloud, not owncloud.

Can my cron-job-problem depend on the trouble with php7-redis? Also I get the message in admin screen "No php memory cache"

It would be realy nice if some one can help a little bit :)

Thank you

what does "pkg install php70-redis" tell you?
possibly the cron job is failing because the memory cache isn't available even though it is enabled. you could verify this by checking the logs or trying...

Code:

su -m www -c 'php -f /usr/local/www/owncloud/cron.php'

 

[ArgaWoW]

what does "pkg install php70-redis" tell you?
possibly the cron job is failing because the memory cache isn't available even though it is enabled. you could verify this by checking the logs or trying...

Code:

su -m www -c 'php -f /usr/local/www/owncloud/cron.php'

Code:

pkg: No packages available to install matching 'php70-redis' have been found in  the repositories

if I test the crown with you command it works.... but only this way.

btw.. me on freenas 9 nightlies....

 

[Joshua Parker Ruehlig]

Code:

pkg: No packages available to install matching 'php70-redis' have been found in  the repositories

if I test the crown with you command it works.... but only this way.

btw.. me on freenas 9 nightlies....

I think this should work
make config-recursive install -C /usr/ports/databases/pecl-redis

hmm, how did you know cron was not working earlier? Do you think you entered the cron job correctly or did you have trouble with the 'vi' editor?

 

[ArgaWoW]

I think this should work
make config-recursive install -C /usr/ports/databases/pecl-redis

hmm, how did you know cron was not working earlier? Do you think you entered the cron job correctly or did you have trouble with the 'vi' editor?

No, I don't have trouble with the cron job so far. Like I said I have done a completly new installation of "nextcloud" this morning. Please, find a hardcopy of my cron attached

Have tryed to install pecl-redis. This is what I get.

Code:

/usr/bin/make  all-recursive
--- all-recursive ---
Making all in glob
Making all in config
Making all in po
Making all in doc
--- ./make.info ---
restore=: && backupdir=".am$$" &&  am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . &&  rm -rf $backupdir && mkdir $backupdir &&  if (/bin/sh /usr/ports/devel/gmake/work/make-4.2.1/config/missing makeinfo --version) >/dev/null 2>&1; then  for f in ./make.info ./make.info-[0-9] ./make.info-[0-9][0-9] ./make.i[0-9] ./make.i[0-9][0-9]; do  if test -f $f; then mv $f $backupdir; restore=mv; else :; fi;  done;  else :; fi &&  cd "$am__cwd";  if /bin/sh /usr/ports/devel/gmake/work/make-4.2.1/config/missing makeinfo  -I .  -o ./make.info ./make.texi;  then  rc=0;  CDPATH="${ZSH_VERSION+.}:" && cd .;  else  rc=$?;  CDPATH="${ZSH_VERSION+.}:" && cd . &&  $restore $backupdir/* `echo "././make.info" | sed 's|[^/]*$||'`;  fi;  rm -rf $backupdir; exit $rc
/usr/ports/devel/gmake/work/make-4.2.1/config/missing: makeinfo: not found
WARNING: 'makeinfo' is missing on your system.
  You should only need it if you modified a '.texi' file, or
  any other file indirectly affecting the aspect of the manual.
  You might want to install the Texinfo package:
  <http://www.gnu.org/software/texinfo/>
  The spurious makeinfo call might also be the consequence of
  using a buggy 'make' (AIX, DU, IRIX), in which case you might
  want to install GNU make:
  <http://www.gnu.org/software/make/>
*** [./make.info] Error code 127
make[13]: stopped in /usr/ports/devel/gmake/work/make-4.2.1/doc
1 error
make[13]: stopped in /usr/ports/devel/gmake/work/make-4.2.1/doc
*** [all-recursive] Error code 1
make[12]: stopped in /usr/ports/devel/gmake/work/make-4.2.1
1 error
make[12]: stopped in /usr/ports/devel/gmake/work/make-4.2.1
*** [all] Error code 2
make[11]: stopped in /usr/ports/devel/gmake/work/make-4.2.1
1 error
make[11]: stopped in /usr/ports/devel/gmake/work/make-4.2.1
===> Compilation failed unexpectedly.
Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to
the maintainer.
*** Error code 1
Stop.
make[10]: stopped in /usr/ports/devel/gmake
*** Error code 1
Stop.
make[9]: stopped in /usr/ports/devel/gmake
*** Error code 1
Stop.
make[8]: stopped in /usr/ports/misc/help2man
*** Error code 1
Stop.
make[7]: stopped in /usr/ports/misc/help2man
*** Error code 1
Stop.
make[6]: stopped in /usr/ports/print/texinfo
*** Error code 1
Stop.
make[5]: stopped in /usr/ports/print/texinfo
*** Error code 1
Stop.
make[4]: stopped in /usr/ports/devel/m4
*** Error code 1
Stop.
make[3]: stopped in /usr/ports/devel/m4
*** Error code 1
Stop.
make[2]: stopped in /usr/ports/devel/autoconf
*** Error code 1
Stop.
make[1]: stopped in /usr/ports/databases/pecl-redis
*** Error code 1
Stop.
make: stopped in /usr/ports/databases/pecl-redis
root@nextcloud:/ #

 

[Joshua Parker Ruehlig]

what I recommend is use 'pkg install' to install all those dependencies listed (gmake/help2man/...) then try the make command.
why did you earlier say you "I have trouble to get the cron job working", how did you know it was not working?

 

[ArgaWoW]

what I recommend is use 'pkg install' to install all those dependencies listed (gmake/help2man/...) then try the make command.
why did you earlier say you "I have trouble to get the cron job working", how did you know it was not working?

I dont understand what you mean i sould do now .... to to the installation from scratch? Sorry me from Germany and i have a litte problem to understand you this time :/

I know the cron dont work because the admin page of nextcloud "last cron job 35min. ago". It sould be between 15 min i guess :)

Again I will thank you for you help

 

[Joshua Parker Ruehlig]

I dont understand what you mean i sould do now .... to to the installation from scratch? Sorry me from Germany and i have a litte problem to understand you this time :/

I know the cron dont work because the admin page of nextcloud "last cron job 35min. ago". It sould be between 15 min i guess :)

Again I will thank you for you help

try these commands

Code:

pkg install gmake help2man texinfo m4 autofconf
make config-recursive install -C /usr/ports/databases/pecl-redis

ahh, yeah that should show every 15 minutes. try fixing the redis issue first. then see if it starts working. or check your owncloud.log (possibly in /mnt/files)

 

[ArgaWoW]

try these commands

Code:

pkg install gmake help2man texinfo m4 autofconf
make config-recursive install -C /usr/ports/databases/pecl-redis

ahh, yeah that should show every 15 minutes. try fixing the redis issue first. then see if it starts working. or check your owncloud.log (possibly in /mnt/files)

I could do all the commands exept of "pkg install autoconf"

try these commands

Code:

pkg install gmake help2man texinfo m4 autofconf
make config-recursive install -C /usr/ports/databases/pecl-redis

ahh, yeah that should show every 15 minutes. try fixing the redis issue first. then see if it starts working. or check your owncloud.log (possibly in /mnt/files)

I have done

Code:

pkg install gmake help2man texinfo m4

if I try

Code:

pkg install aufofconf

I get

Code:

pkg: No packages available to install matching 'autofconf' have been found in the repositories

But I guess

Code:

make config-recursive install -C /usr/ports/databases/pecl-redis

worked this time.

I tryed to enable Memcache in the config.php

Code:

'memcache.local' => '\\OC\\Memcache\\APCu',

I get

Code:

Memcache \OC\Memcache\APCu not available for local cache Is the matching PHP module installed and enabled?

if I go to the Nextcloud UI

 

[Joshua Parker Ruehlig]

I could do all the commands exept of "pkg install autoconf"

I have done

Code:

pkg install gmake help2man texinfo m4

if I try

Code:

pkg install aufofconf

I get

Code:

pkg: No packages available to install matching 'autofconf' have been found in the repositories

But I guess

Code:

make config-recursive install -C /usr/ports/databases/pecl-redis

worked this time.

I tryed to enable Memcache in the config.php

Code:

'memcache.local' => '\\OC\\Memcache\\APCu',

I get

Code:

Memcache \OC\Memcache\APCu not available for local cache Is the matching PHP module installed and enabled?

if I go to the Nextcloud UI

ohh, that was a typo, should have been 'autoconf'

did you install APCu like in the instructions? I updated it less than 24 hours ago so maybe the correct step wasn't there yet.
make config-recursive install -C /usr/ports/databases/pecl-redis

 

[ArgaWoW]

ohh, that was a typo, should have been 'autoconf'

did you install APCu like in the instructions? I updated it less than 24 hours ago so maybe the correct step wasn't there yet.
make config-recursive install -C /usr/ports/databases/pecl-redis

I have done

Code:

pkg install autoconf

and I get

Code:

The most recent version of packages are already installed

I have done

Code:

make config-recursive install -C /usr/ports/devel/pecl-APCu

according to the first page. So I guess I have installed APCu

 

[ArgaWoW]

The next problem I have. When I restard the jail, I must do

Code:

service nginx start && service php-fpm start && service mysql-server start && service redis start

manually. They don't autostart.

I guess something is going very wrong while the installation. Should I try to do a complete new one to solve all this problems?

 

[Joshua Parker Ruehlig]

You can check pecl-APCu is installed with 'pkg info'
you can also verify apcu is available to PHP by creating an phpinfo file in /usr/local/www/owncloud/updater

they should start if you enabled them with the sysrc command.
what does 'cat /etc/rc.conf' show?

I personally would just fix the issues, but if reinstall sounds better to you you can do it.

 

[ArgaWoW]

You can check pecl-APCu is installed with 'pkg info'
you can also verify apcu is available to PHP by creating an phpinfo file in /usr/local/www/owncloud/updater

they should start if you enabled them with the sysrc command.
what does 'cat /etc/rc.conf' show?

I personally would just fix the issues, but if reinstall sounds better to you you can do it.

Ok, lets try to fix it :)

This is the output of pkg info:

Code:

apr-1.5.2.1.5.4_2  Apache Portability Library
autoconf-2.69_1  Automatically configure source code on many Un*x platforms
autoconf-wrapper-20131203  Wrapper script for GNU autoconf
ca_root_nss-3.30.1  Root certificate bundle from the Mozilla Project
curl-7.53.1_1  Non-interactive tool to get files from FTP, GOPHER, HTTP(S) servers
cvsps-2.1_2  Create patchset information from CVS
db5-5.3.28_6  Oracle Berkeley DB, revision 5.3
dialog4ports-0.1.6  Console Interface to configure ports
expat-2.2.0_1  XML 1.0 parser written in C
freetype2-2.7.1  Free and portable TrueType font rendering engine
gdbm-1.12  GNU database manager
gettext-runtime-0.19.8.1_1  GNU gettext runtime libraries and programs
gettext-tools-0.19.8.1  GNU gettext development and translation tools
git-2.12.1  Distributed source code management tool
gmake-4.2.1_1  GNU version of 'make' utility
help2man-1.47.4  Automatically generating simple manual pages from program output
icu-58.2_1,1  International Components for Unicode (from IBM)
indexinfo-0.2.6  Utility to regenerate the GNU info page index
jpeg-turbo-1.5.1  SIMD-accelerated JPEG codec which replaces libjpeg
kbproto-1.0.7  KB extension headers
libICE-1.0.9_1,1  Inter Client Exchange library for X11
libSM-1.2.2_3,1  Session Management library for X11
libX11-1.6.5,1  X11 library
libXau-1.0.8_3  Authentication Protocol library for X11
libXaw-1.0.13,2  X Athena Widgets library
libXdmcp-1.1.2  X Display Manager Control Protocol library
libXext-1.3.3_1,1  X11 Extension library
libXmu-1.1.2_3,1  X Miscellaneous Utilities libraries
libXp-1.0.3,1  X print library
libXpm-3.5.12  X Pixmap library
libXt-1.1.5,1  X Toolkit library
libffi-3.2.1  Foreign Function Interface
libgcrypt-1.7.6  General purpose crypto library based on code used in GnuPG
libgpg-error-1.27  Common error values for all GnuPG components
libiconv-1.14_10  Character set conversion library
libltdl-2.4.6  System independent dlopen wrapper
libmcrypt-2.5.8_3  Multi-cipher cryptographic library (used in PHP)
libnghttp2-1.21.1  HTTP/2.0 C Library
libpthread-stubs-0.4  This library provides weak aliases for pthread functions
libxcb-1.12_2  The X protocol C-language Binding (XCB) library
libxml2-2.9.4  XML parser library for GNOME
libxslt-1.1.29_1  The XSLT C library for GNOME
libzip-1.1.3  C library for reading, creating, and modifying ZIP archives
m4-1.4.18,1  GNU M4
mariadb101-client-10.1.22_1  Multithreaded SQL database (client)
mariadb101-server-10.1.22_1  Multithreaded SQL database (server)
nginx-1.10.3_1,2  Robust and small WWW server
oniguruma5-5.9.6_1  BSDL Regular Expressions library compatible with POSIX/GNU/Perl
p5-Authen-SASL-2.16_1  Perl5 module for SASL authentication
p5-Digest-HMAC-1.03_1  Perl5 interface to HMAC Message-Digest Algorithms
p5-Error-0.17024  Error/exception handling in object-oriented programming style
p5-GSSAPI-0.28_1  Perl extension providing access to the GSSAPIv2 library
p5-Locale-gettext-1.06  Message handling functions
pcre-8.40  Perl Compatible Regular Expressions library
pecl-APCu-5.1.8  APC User Caching
pecl-redis-3.1.1  Extension to access Redis
perl5-5.24.1_1  Practical Extraction and Report Language
php70-7.0.17  PHP Scripting Language
php70-bz2-7.0.17  The bz2 shared extension for php
php70-ctype-7.0.17  The ctype shared extension for php
php70-curl-7.0.17  The curl shared extension for php
php70-dom-7.0.17  The dom shared extension for php
php70-exif-7.0.17  The exif shared extension for php
php70-fileinfo-7.0.17  The fileinfo shared extension for php
php70-filter-7.0.17  The filter shared extension for php
php70-gd-7.0.17  The gd shared extension for php
php70-hash-7.0.17  The hash shared extension for php
php70-iconv-7.0.17  The iconv shared extension for php
php70-intl-7.0.17  The intl shared extension for php
php70-json-7.0.17  The json shared extension for php
php70-mbstring-7.0.17  The mbstring shared extension for php
php70-mcrypt-7.0.17  The mcrypt shared extension for php
php70-openssl-7.0.17  The openssl shared extension for php
php70-pdo-7.0.17  The pdo shared extension for php
php70-pdo_mysql-7.0.17  The pdo_mysql shared extension for php
php70-posix-7.0.17  The posix shared extension for php
php70-session-7.0.17  The session shared extension for php
php70-simplexml-7.0.17  The simplexml shared extension for php
php70-wddx-7.0.17  The wddx shared extension for php
php70-xml-7.0.17  The xml shared extension for php
php70-xmlreader-7.0.17  The xmlreader shared extension for php
php70-xmlwriter-7.0.17  The xmlwriter shared extension for php
php70-xsl-7.0.17  The xsl shared extension for php
php70-zip-7.0.17  The zip shared extension for php
php70-zlib-7.0.17  The zlib shared extension for php
pkg-1.10.1  Package manager
png-1.6.29  Library for manipulating PNG images
printproto-1.0.5  Print extension headers
python27-2.7.13_1  Interpreted object-oriented programming language
readline-6.3.8  Library for editing command lines as they are typed
redis-3.2.8  Persistent key-value database with built-in net interface
serf-1.3.9_1  Serf HTTP client library
sqlite3-3.18.0  SQL database engine in a C library
subversion-1.9.5  Version control system
t1lib-5.1.2_4,1  Type 1 font rasterization library for Unix/X11
texinfo-6.1.20160425_1,1  Typeset documentation system with multiple format output
xextproto-7.3.0  XExt extension headers
xproto-7.0.31  X11 protocol headers

Seems It is installed.

This is my rc.conf

Code:

ortmap_enable="NO"
sshd_enable="NO"
sendmail_enable="NO"
sendmail_submit_enable="NO"
sendmail_outbound_enable="NO"
sendmail_msp_queue_enable="NO"
hostname="nextcloud"
devfs_enable="YES"
devfs_system_ruleset="devfsrules_common"
inet6_enable="YES"
ip6addrctl_enable="YES"
nginx_enable="YES"
php_fpm_enable="YES"
mysql_enable="YES"
redis_enable="YES"

looks good.

Sorry, I dont know how to create the php.info file :/