DeaDSouL
Dabbler
- Joined
- Dec 21, 2015
- Messages
- 34
Hi,
My FreeNAS server was working just fine until I did the following
1) Upgraded the FreeNAS (from 11.0-U4 to 11.1-RELEASE).
2) Upgraded the ECC-RAM (from 128GB to 256GB).
3) Enabled System->Advanced->Enable autotune.
Then, the FreeNAS started to throw some errors. Like:
First
when I reboot, and try to unlock the encrypted ZFS pool, it gives me this error:
in web-UI:
in console:
But the pool was unlocked.
Second thing,
the emby plugin just stopped working and doesn't want to start complaining about mono-sgen. even with a newly installed emby plugin.. the error:
Third thing, the transfer rate is really slow,
from FreeNAS to client: 70~80MB
from client to FreeNAS: 130~150MB
Even when I re-transfer it again.. seems the cache is not working.
ps: my connection is 10G Base-T (with MTU 9000 on FreeNAS, switch, and clients)
And
My swap was 40GB.. but when I've upgraded the RAM it becomes only 10GB !!
And
when I try to boot the 11.0-U4, it doesn't boot and gave me this error:
Even when I disable the autotune, and delete all generated entries in System->Tunables table:
This is my FreeNAS boot process:
My FreeNAS server was working just fine until I did the following
1) Upgraded the FreeNAS (from 11.0-U4 to 11.1-RELEASE).
2) Upgraded the ECC-RAM (from 128GB to 256GB).
3) Enabled System->Advanced->Enable autotune.
Then, the FreeNAS started to throw some errors. Like:
First
when I reboot, and try to unlock the encrypted ZFS pool, it gives me this error:
in web-UI:
Code:
Environment: Software Version: FreeNAS-11.1-RELEASE (dc7d195f4) Request Method: POST Request URL: http://storage.hom/storage/volume/4/unlock/?X-Progress-ID=685c823b-66d8-47d7-844a-d894f25bd1eb Traceback: File "/usr/local/lib/python3.6/site-packages/django/core/handlers/exception.py" in inner 42. response = get_response(request) File "/usr/local/lib/python3.6/site-packages/django/core/handlers/base.py" in _legacy_get_response 249. response = self._get_response(request) File "/usr/local/lib/python3.6/site-packages/django/core/handlers/base.py" in _get_response 178. response = middleware_method(request, callback, callback_args, callback_kwargs) File "./freenasUI/freeadmin/middleware.py" in process_view 162. return login_required(view_func)(request, *view_args, **view_kwargs) File "/usr/local/lib/python3.6/site-packages/django/contrib/auth/decorators.py" in _wrapped_view 23. return view_func(request, *args, **kwargs) File "./freenasUI/storage/views.py" in volume_unlock 1005. form.done(volume=volume) File "./freenasUI/storage/forms.py" in done 2797. _notifier.restart(svc) File "./freenasUI/middleware/notifier.py" in restart 223. return c.call('service.restart', what, {'onetime': onetime}, **kwargs) File "./freenasUI/middleware/notifier.py" in restart 223. return c.call('service.restart', what, {'onetime': onetime}, **kwargs) File "/usr/local/lib/python3.6/site-packages/middlewared/client/client.py" in call 389. raise CallTimeout("Call timeout") Exception Type: CallTimeout at /storage/volume/4/unlock/ Exception Value: Call timeout
in console:
But the pool was unlocked.
Second thing,
the emby plugin just stopped working and doesn't want to start complaining about mono-sgen. even with a newly installed emby plugin.. the error:
Code:
kernel: pid 33991 (mono-sgen), uid 989: exited on signal 6
Third thing, the transfer rate is really slow,
from FreeNAS to client: 70~80MB
from client to FreeNAS: 130~150MB
Even when I re-transfer it again.. seems the cache is not working.
ps: my connection is 10G Base-T (with MTU 9000 on FreeNAS, switch, and clients)
And
My swap was 40GB.. but when I've upgraded the RAM it becomes only 10GB !!
And
when I try to boot the 11.0-U4, it doesn't boot and gave me this error:
Even when I disable the autotune, and delete all generated entries in System->Tunables table:
This is my FreeNAS boot process:
Last edited: