encrypted

  1. socra

    unable to remount an encrypted drive after error during write to the drive [Error 5, Periph was invalidated]

    Currently running 11.2-u1 native on a otherwise stable system. Freenas 11.2-U1 8GB non-ECC Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz (4 cores) MSI Motherboard SSD for bootdrive Couple of data drives for my media collection (which are connected to an LSI HBA card) Drive in question is connected...
  2. r2p2

    OFFLINE, ONLINE of encrypted disk does not work

    I might be doing something wrong but can't figure out what. Before going live, I thought it would be a good idea to test things with the help of a virtual machine. The result was a vm containing 2 disks for the operating system and 4 in an enrypted raidz2 as storage pool. When playing around...
  3. bitsquirrel

    raidz2 + encryption + faulted drive; re-importing & resilvering 11.1-U4

    Hello so I have an encrypted raidz2 pool with a faulted drive (da0). I wanted to upgrade the entire array, but ran into snags. What I did was, detach the entire array, reboot, and attempt to get the new drives to work. The new 12TB SAS drives appear to not spin up; I think that is a "pin3...
  4. L

    Insufficient replicas for degraded raidz pool

    Hi all, I am new to this forum and need some help on my encrypted pool. I have an encrypted 4 disks raidz1 pool. All disks are WD 4TB RE 7200rpm System specs are: Build FreeNAS-9.10.2-U6 (561f0d7a1) Platform Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz Memory 5985MB non-ECC Motherboard Asus B85M-G...
  5. C

    local encrypted backup.

    Is there a way I can make a local replication task output encrypted data. Meaning that the data on the beta(destination) freenas computer would be encrypted so I could store the beta data anywhere. From the Manual it dose not look like this possible with the stock tools. I looked at rclone...
  6. DeaDSouL

    Upgrading from 11.0-U4 to 11.1-RELEASE caused many issues!

    Hi, My FreeNAS server was working just fine until I did the following 1) Upgraded the FreeNAS (from 11.0-U4 to 11.1-RELEASE). 2) Upgraded the ECC-RAM (from 128GB to 256GB). 3) Enabled System->Advanced->Enable autotune. Then, the FreeNAS started to throw some errors. Like: First when I...
  7. gegtor

    Encrypting my FreeNAS box and moving data

    Hi guys I want to encrypt my FreeNAS box To do this I have to destroy my current volume and create new encrypted one with my disks that will erase all data on them What is the best way to transfer data from my old volume to new encrypted one? I have to move few datasets and few zvol's for my...
  8. S

    ZFS Access / Encrypted Disks

    Hi all, Came home from work to find my FN Corral install wasn't working. After a little investigation I found that my ZFS pool was DEGRADED. I might add I was running boot USBs in Mirror and the system was providing the following errors: Despite the mirror regardless of which USB was in the...
  9. Archaniel

    Upgrade FreeNAS-9.10.2-U6 -> 11-Stable with Full Disk Encryption

    I'm considering swapping trains in the gui to 11-Stable and I have encrypted pool. I have few questions: * Should I do a backup, or the pool won't be affected? Should I backup some settings etc? Or is the upgrade seamless? * The geli.key which I download from storage screen - I can use that key...
  10. N

    Encrypted pool degraded and disks unavail

    I'm really not sure what to do and could use some pointers. One disk started reporting a few days ago "Device: /dev/ada2, 1 Currently unreadable (pending) sectors". So I thought "ok, I'll just replace". Yes, I realize I should have read user guide first. After replacing it, I'm now seeing...
  11. T

    verschlüsselter Pool lässt sich nicht mehr einbinden

    Hallo, nach dem meim USB Stick kaputt war, auf dem das FreeNas OS lief habe ich auf einen neuen USB Stick das OS wieder aufgespielt. Ein Key hatte ich zur Sicherheit auch von Anfang an gesichert. Jetzt habe ich das große Problem, dass sich der encypted pool aus zwei Festplatten sich nicht mehr...
  12. T

    Attempting FreeNAS Corral to 11.0 upgrade

    Background: Upgraded system to Corral, upgraded encrypted volume, worked fine for a few weeks. Boot drive failed, waited a long time, replaced boot drive and installed FreeNAS 11. Now I am attempting to re-import my encrypted ZFS pool. When attempting to re-import the volume, I use the .key...
  13. Robert Freitag

    NAS Build for small VFX Company. Need input from experienced users.

    Hello, I own a small VFX company which finally needs a more decent storage solution, over the last days I've investigated quite a lot. And I think that I'll go with FreeNAS and a Build according to my/our needs. If any of you experienced FreeNAS users could answer me some questions and possibly...
  14. H

    oh NO!

    I believe I may have just destroyed about 15 yrs of my digital life... Tried for an in-place FreeNAS-9.10.2-U2 update to FreeNAS-9.10.2-U3, which failed. It's boot volume was a 4GB USB drive and didn't have enough space to complete the upgrade. I had a spare 8GB USB drive laying around and...
  15. F

    How do I remotely decrypt volume via ssh when using private key?

    I have my FreeNAS setup so I can remotely access it via ssh using a private key. I'm away from home for an extended trip, but when I received an email that a FreeNAS update is available, I opened an ssh tunnel as I typically do, and through SOCKS5 was able to use the WebUI to update the system...
Top