TrueNAS Scale, FreeBSD install/boot successfully; booting TrueNAS Core, FreeNAS result in kernel failure

[m0nk3ys33]

Hello!

I’ve been having a hard time getting TrueNAS Core up and running on a new server (having tried versions 13, 12, and 11).

Previous posts similar to this topic (#1 | #2 | #3) have cited issues with memory or the boot drive as the likely culprit. However, I’m able to install both the latest release of Scale and FreeBSD on this same system without issues, which has me scratching my head.

• PowerEdge R750
• Intel Xeon Silver 4310
• 16GB RDIMM x2
• Booting from 2 mirrored SSDs managed by a Dell BOSS-S2 controller.
• Dell HBA355i storage controller managing SAS drives

I get the same results installing either in BIOS mode or with secure boot disabled in UEFI: the installer completes, but when I boot the OS I get a kernel panic (screenshot).

My gut tells me my problem lies in the boot drive, but why would Scale install & run seamlessly while the FreeNAS/Core OSs fail to boot?

 

[Ericloewe]

That's an odd one. Which version of FreeBSD did you test this with?

 

[m0nk3ys33]

I used the FreeBSD 13.2 bootable release linked here: https://download.freebsd.org/releases/amd64/amd64/ISO-IMAGES/13.2/

 

[Ericloewe]

That should be broadly similar to recent TrueNAS Core, which really doesn't lead us anywhere...

I'd say we should get a better look at the panic. Can you please use the iDRAC serial console so we can look at the full boot process?
I haven't tried Dell's native viewer, but you should be able to log in via SSH to iDRAC and use your favorite client to record arbitrary lengths of scrollback.

 

[unseen]

• Booting from 2 mirrored SSDs managed by a Dell BOSS-S2 controller.

Could it be that trying to boot TrueNAS from drives running on an unsupported RAID card is what is causing the panic?
Can you take the BOSS-S2 RAID card out of the equation and connect the SSDs directly to the motherboard?

 

[Ericloewe]

It's a distinct possibility, but since everything else works, more info would be nice to narrow things down.

 

[Davvo]

Have you tried a TN12 install?

 

[Ericloewe]

(having tried versions 13, 12, and 11).

Yes, as per the above (emphasis mine).

 

[Davvo]

Yes, as per the above (emphasis mine).

Missed that.

I remember a similar thread that got resolved after a bug report was submitted and a iX's engineer fixed something.

 

[m0nk3ys33]

Here is the console output when I try booting Core post installation

TrueNAS 12.0:

Code:

Consoles: EFI console
    Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p2:
FreeBSD/amd64 EFI loader, Revision 1.1

   Command line arguments: loader.efi
   EFI version: 2.70
   EFI Firmware: Dell Inc. (rev 522.257)
   Console: efi (0x20000000)
   Load Path: HD(2,GPT,01C4406B-3C33-11EE-B48F-C84BD69C45AA,0x2082028,0x35DA0000)
   Load Device: PciRoot(0x0)/Pci(0x1D,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(2,GPT,01C4406B-3C33-11EE-B48F-C84BD69C45AA,0x2082028,0x35DA0000)
   BootCurrent: 0000
   BootOrder: 0005 0006 0003 0000[*]
   BootInfo Path: PciRoot(0x0)/Pci(0x1D,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(1,GPT,01BAD96C-3C33-11EE-B48F-C84BD69C45AA,0x28,0x82000)
Ignoring Boot0000: Only one DP found
Trying ZFS pool
Setting currdev to zfs:boot-pool/ROOT/default:
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
-
/  ______               _     _   __    _____
  |__  __|             | \   | | /  \  /  ___|
    |  | _ __   __  ___|  \  | |/ /\ \|  (__
    |  || '__|| | |/ _ \ |\\ | | |__| |\___ \
    |  || | | |_| |  __/ | \\| |  __  |____) |
    |__||_| |_____|\_\ |_|  \ _|_| _|_|_____/

 +---------------------------Welcome to TrueNAS-----------------------------+
 |                                                                          |
 |  1. Boot TrueNAS [Enter]                            :dd  dd:             |
 |  2. Boot TrueNAS (Serial Console)                :ddMMd  dMMdd::         |
 |  3. Escape to loader prompt                  ::dMMMMMMd  dMMMMMMd::      |
 |  4. Reboot                                 :dMMMMMMMdd:  :ddMMMMMMMd:    |
 |                                           :  :ddMdd:  ::::  :ddMdd:  :   |
 |  Options:                                 Md::  :  ::dMMMMd::  :  ::dd   |
 |  5. Kernel: default/kernel (1 of 2)       MMMMdd:  ::dMMMMd::  :ddMMMd   |
 |  6. Boot Options                          MMMMMMMdd:  ::::  :ddMMMMMMd   |
 |                                           ::dMMMMMMMdd:  :ddMMMMMMMd::   |
 |                                              ::dMMMMMMd  dMMMMMMd::      |
 |                                                 ::ddMMd  dMMdd::         |
 |                                                     :dd  dd:\            |
 +--------------------------------------------------------------------------+
   Autoboot in 0 seconds, hit [Enter] to boot or any other key to stop

Loading kernel...
/boot/kernel/kernel text=0x1667bd4 data=0x140 data=0xa147b0 syms=[0x8+0x1a5ec0+0x8+0x1f9be7]
Loading configured modules...
/boot/kernel/ispfw.ko size 0x100fb0 at 0x27b6000
/boot/modules/if_atlantic.ko size 0x19e88 at 0x28b7000
can't find '/boot/entropy'
/boot/kernel/if_bnxt.ko size 0x33228 at 0x28d1000
/boot/kernel/if_qlxgbe.ko size 0x2253c0 at 0x2905000
/boot/modules/openzfs.ko size 0x65c558 at 0x2b2b000
/boot/kernel/ipmi.ko size 0x11c70 at 0x3188000
loading required module 'smbus'
/boot/kernel/smbus.ko size 0x2ef0 at 0x319a000
can't find '/etc/hostid'
Start @ 0xffffffff8037a000 ...
EFI framebuffer information:
addr, size     0x91000000, 0x300000
dimensions     1024 x 768
stride         1024
masks          0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE-p14 325282c09a5(HEAD) TRUENAS amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) Silver 4310 CPU @ 2.10GHz (2095.13-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x606a6  Family=0x6  Model=0x6a  Stepping=6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0xf3bfbfff<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
  Structured Extended Features2=0x40417f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,SGXLC>
  Structured Extended Features3=0xbc040412<MD_CLEAR,PCONFIG,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x6bdeb<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,TSX_CTRL,TAA_NO>
  AMD Extended Feature Extensions ID EBX=0x200
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 32561381376 (31052 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 48 CPUs
FreeBSD/SMP: 2 package(s) x 12 core(s) x 2 hardware threads
arc4random: no preloaded entropy cache
ioapic0: MADT APIC ID 8 != hw id 13
ioapic0 <Version 2.0> irqs 0-119 on motherboard
Launching APs: 1 23 28 5 46 4 45 16 47 26 6 17 27 7 10 18 20 33 34 8 31 35 14 15 24 36 41 43 38 39 19 9 44 40 32 42 29 30 13 21 25 2 22 3 37 11 12
Timecounter "TSC" frequency 2095132654 Hz quality 1000
random: entropy device external interface
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd0 at kbdmux0
mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard
padlock0: No ACE support.
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 350
Event timer "HPET1" frequency 24000000 Hz quality 340
Event timer "HPET2" frequency 24000000 Hz quality 340
Event timer "HPET3" frequency 24000000 Hz quality 340
Event timer "HPET4" frequency 24000000 Hz quality 340
Event timer "HPET5" frequency 24000000 Hz quality 340
Event timer "HPET6" frequency 24000000 Hz quality 340
Event timer "HPET7" frequency 24000000 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pci0: <unknown> at device 2.4 (no driver attached)
pci0: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Lewisburg AHCI SATA controller> port 0x3068-0x306f,0x3074-0x3077,0x3040-0x305f mem 0x92efa000-0x92efbfff,0x92f05000-0x92f050ff,0x92c80000-0x92cfffff at device 17.5 numa-domain 0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Lewisburg USB 3.0 controller> mem 0x92ee0000-0x92eeffff at device 20.0 numa-domain 0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
pci0: <simple comms> at device 22.4 (no driver attached)
ahci1: <Intel Lewisburg AHCI SATA controller> port 0x3060-0x3067,0x3070-0x3073,0x3020-0x303f mem 0x92ef8000-0x92ef9fff,0x92f04000-0x92f040ff,0x92c00000-0x92c7ffff at device 23.0 numa-domain 0 on pci0
ahci1: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich5: <AHCI channel> at channel 3 on ahci1
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich7: <AHCI channel> at channel 5 on ahci1
ahcich8: <AHCI channel> at channel 6 on ahci1
ahcich9: <AHCI channel> at channel 7 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib1: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci2
pci3: <PCI bus> numa-domain 0 on pcib3
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92808000-0x9280bfff,0x92000000-0x927fffff at device 0.0 numa-domain 0 on pci3
vgapci0: Boot video device
pcib4: <ACPI PCI-PCI bridge> at device 28.5 numa-domain 0 on pci0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x92930000-0x9293ffff,0x92940000-0x9294ffff,0x92950000-0x9295ffff at device 0.0 numa-domain 0 on pci4
bge0: APE FW version: NCSI v1.5.42.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: c8:4b:d6:9c:45:aa
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x92900000-0x9290ffff,0x92910000-0x9291ffff,0x92920000-0x9292ffff at device 0.1 numa-domain 0 on pci4
bge1: APE FW version: NCSI v1.5.42.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: c8:4b:d6:9c:45:ab
pcib5: <ACPI PCI-PCI bridge> at device 29.0 numa-domain 0 on pci0
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
ahci2: <Marvell 88SE9230 AHCI SATA controller> port 0x2028-0x202f,0x2034-0x2037,0x2020-0x2027,0x2030-0x2033,0x2000-0x201f mem 0x92b00000-0x92b007ff at device 0.0 numa-domain 0 on pci5
ahci2: AHCI v1.20 with 3 6Gbps ports, Port Multiplier not supported
ahci2: quirks=0x900<NOBSYRES,ALTSIG>
ahcich10: <AHCI channel> at channel 0 on ahci2
ahcich11: <AHCI channel> at channel 1 on ahci2
ahcich12: <AHCI channel> at channel 2 on ahci2
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
pci0: <memory> at device 31.2 (no driver attached)
pci0: <serial bus> at device 31.5 (no driver attached)
pcib6: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib6: could not evaluate _ADR - AE_NOT_FOUND
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> mem 0x21fffff00000-0x21fffff1ffff at device 2.0 numa-domain 0 on pci6
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
mpr0: <Broadcom Inc. (LSI) HARD SEC SAS3816> port 0x5000-0x50ff mem 0x9b800000-0x9b8fffff,0x9b900000-0x9b9fffff,0x9ba00000-0x9bafffff at device 0.0 numa-domain 0 on pci7
mpr0: Firmware: 24.15.03.00, Driver: 23.00.00.00-fbsd
mpr0: IOCCapabilities: 2fa84c<ScsiTaskFull,DiagTrace,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray,AtomicReqDesc>
pcib8: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib8: could not evaluate _ADR - AE_NOT_FOUND
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> mem 0x22fffff00000-0x22fffff1ffff at device 4.0 numa-domain 0 on pci8
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6610000-0xa661ffff,0xa6500000-0xa65fffff,0xa6622000-0xa6623fff at device 0.0 numa-domain 0 on pci9
arc4random: no preloaded entropy cache
bnxt0: Using 256 TX descriptors and 256 RX descriptors
bnxt0: Using 0 RX queues 0 TX queues
bnxt0: Using MSI-X interrupts with 1 vectors
bnxt0: iflib_dma_alloc_align: bus_dma_tag_create failed: 22
bnxt0: Unable to allocate device TX queue
bnxt0: Unable to allocate queue memory
device_attach: bnxt0 attach returned 22
Warning: failed attempt to remove oid fc with child autoneg
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%desc)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%driver)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%location)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%pnpinfo)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%parent)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%domain)!
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6600000-0xa660ffff,0xa6400000-0xa64fffff,0xa6620000-0xa6621fff at device 0.1 numa-domain 0 on pci9
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.driver_version)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_qs_enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.disable_msix)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.rx_budget)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.tx_abdicate)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.core_offset)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.separate_txrx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.use_logical_cores)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.mfg_id)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.device_id)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.sector_size)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.size)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.reserved_size)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.available_size)!
arc4random: no preloaded entropy cache
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.rss_key)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.rss_type)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.rx_stall)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.vlan_strip)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.if_name)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_rx_usecs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_rx_frames)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_rx_usecs_irq)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_rx_frames_irq)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_tx_usecs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_tx_frames)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_tx_usecs_irq)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_tx_frames_irq)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.gro_mode)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.max_agg_segs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.max_aggs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.min_agg_len)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.fc.tx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.fc.rx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.fc.autoneg)!
bnxt0: Using 256 TX descriptors and 256 RX descriptors
bnxt0: Using 0 RX queues 0 TX queues
bnxt0: Using MSI-X interrupts with 1 vectors
bnxt0: iflib_dma_alloc_align: bus_dma_tag_create failed: 22
bnxt0: Unable to allocate device TX queue
bnxt0: Unable to allocate queue memory
device_attach: bnxt0 attach returned 22
pcib10: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib10: could not evaluate _ADR - AE_NOT_FOUND
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib11: could not evaluate _ADR - AE_NOT_FOUND
pci11: <ACPI PCI bus> numa-domain 0 on pcib11
pcib12: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib12: could not evaluate _ADR - AE_NOT_FOUND
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pci12: <dasp, performance counters> at device 12.0 (no driver attached)
pci12: <dasp, performance counters> at device 13.0 (no driver attached)
pci12: <dasp, performance counters> at device 14.0 (no driver attached)
pci12: <dasp, performance counters> at device 15.0 (no driver attached)
pci12: <dasp, performance counters> at device 26.0 (no driver attached)
pci12: <dasp, performance counters> at device 27.0 (no driver attached)
pci12: <dasp, performance counters> at device 28.0 (no driver attached)
pci12: <dasp, performance counters> at device 29.0 (no driver attached)
pcib13: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib13: could not evaluate _ADR - AE_NOT_FOUND
pci13: <ACPI PCI bus> numa-domain 0 on pcib13
pcib14: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib14: could not evaluate _ADR - AE_NOT_FOUND
pci14: <ACPI PCI bus> numa-domain 1 on pcib14
pci14: <unknown> at device 2.4 (no driver attached)
pcib15: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib15: could not evaluate _ADR - AE_NOT_FOUND
pci15: <ACPI PCI bus> numa-domain 1 on pcib15
pcib16: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib16: could not evaluate _ADR - AE_NOT_FOUND
pci16: <ACPI PCI bus> numa-domain 1 on pcib16
pcib17: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib17: could not evaluate _ADR - AE_NOT_FOUND
pci17: <ACPI PCI bus> numa-domain 1 on pcib17
pcib18: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib18: could not evaluate _ADR - AE_NOT_FOUND
pci18: <ACPI PCI bus> numa-domain 1 on pcib18
pcib19: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib19: could not evaluate _ADR - AE_NOT_FOUND
pci19: <ACPI PCI bus> numa-domain 1 on pcib19
pci19: <dasp, performance counters> at device 12.0 (no driver attached)
pci19: <dasp, performance counters> at device 13.0 (no driver attached)
pci19: <dasp, performance counters> at device 14.0 (no driver attached)
pci19: <dasp, performance counters> at device 15.0 (no driver attached)
pci19: <dasp, performance counters> at device 26.0 (no driver attached)
pci19: <dasp, performance counters> at device 27.0 (no driver attached)
pci19: <dasp, performance counters> at device 28.0 (no driver attached)
pci19: <dasp, performance counters> at device 29.0 (no driver attached)
pcib20: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib20: could not evaluate _ADR - AE_NOT_FOUND
pci20: <ACPI PCI bus> numa-domain 1 on pcib20
apei0: <ACPI Platform Error Interface> on acpi0
cpu0: <ACPI CPU> numa-domain 0 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
ipmi0: <IPMI System Interface> port 0xca8,0xcac irq 10 on acpi0
ipmi0: KCS mode found at io 0xca8 on acpi
ichwd0: <Lewisburg watchdog timer> at port 0x400-0x41f iomem 0xfdc6000c-0xfdc6000f on isa0
orm0: <ISA Option ROM> at iomem 0xed800-0xf17ff pnpid ORM0000 on isa0
arc4random: no preloaded entropy cache
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d9900001b00
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00

[ ... edited out repeating lines so post doesn't go over max. word limit ... ]

device_attach: est44 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est45 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est46 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est47 attach returned 6
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
arc4random: no preloaded entropy cache
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0017> enclosureHandle<0x0002> slot 8
mpr0: At enclosure level 1 and connector name (C1  )
ipmi0: IPMI device rev. 1, firmware rev. 7.00, version 2.0, device support mask 0xdf
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001c> enclosureHandle<0x0002> slot 9
mpr0: At enclosure level 1 and connector name (C1  )
ipmi0: Number of channels 2
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001d> enclosureHandle<0x0002> slot 10
mpr0: At enclosure level 1 and connector name (C1  )
ipmi0: Attached watchdog
ipmi0: Establishing power cycle handler
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001e> enclosureHandle<0x0002> slot 11
mpr0: At enclosure level 1 and connector name (C1  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0018> enclosureHandle<0x0002> slot 0
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001f> enclosureHandle<0x0002> slot 1
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0020> enclosureHandle<0x0002> slot 2
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0021> enclosureHandle<0x0002> slot 3
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0022> enclosureHandle<0x0002> slot 4
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001b> enclosureHandle<0x0002> slot 5
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0019> enclosureHandle<0x0002> slot 6
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001a> enclosureHandle<0x0002> slot 7
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <5c01<SspTarg,Direct,LsiDev,SepDev>,End Device> <3.0Gbps> handle<0x0012> enclosureHandle<0x0002> slot 12
mpr0: At enclosure level 1 and connector name (C0  )
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%desc)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%driver)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%location)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%pnpinfo)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%parent)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%domain)!
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6610000-0xa661ffff,0xa6500000-0xa65fffff,0xa6622000-0xa6623fff at device 0.0 numa-domain 0 on pci9
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.driver_version)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_qs_enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.disable_msix)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.rx_budget)!
ahcich10: stopping AHCI engine failed
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.tx_abdicate)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.core_offset)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.separate_txrx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.use_logical_cores)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxds)!
bnxt0: PCI BAR0 mapping failure
bnxt0: IFDI_ATTACH_PRE failed 6
device_attach: bnxt0 attach returned 6
pci0:49:0:0: Device leaked memory resources
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%desc)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%driver)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%location)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%pnpinfo)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%parent)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%domain)!
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6600000-0xa660ffff,0xa6400000-0xa64fffff,0xa6620000-0xa6621fff at device 0.1 numa-domain 0 on pci9
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.driver_version)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_qs_enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.disable_msix)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.rx_budget)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.tx_abdicate)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.core_offset)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.separate_txrx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.use_logical_cores)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxds)!
bnxt0: PCI BAR0 mapping failure
bnxt0: IFDI_ATTACH_PRE failed 6
device_attach: bnxt0 attach returned 6
pci0:49:0:1: Device leaked memory resources
ahcich12: stopping AHCI engine failed
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%desc)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%driver)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%location)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%pnpinfo)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%parent)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%domain)!
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6610000-0xa661ffff,0xa6500000-0xa65fffff,0xa6622000-0xa6623fff at device 0.0 numa-domain 0 on pci9
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.driver_version)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_qs_enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.disable_msix)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.rx_budget)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.tx_abdicate)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.core_offset)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.separate_txrx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.use_logical_cores)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxds)!
ahcich12: stopping AHCI engine failed
ahcich12: stopping AHCI engine failed
ahcich12: stopping AHCI engine failed
ada0 at ahcich10 bus 0 scbus12 target 0 lun 0
ada0: <DELLBOSS VD MV.R00-0> ATA8-ACS SATA 3.x device
ada0: Serial Number f07488ff27d80010
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 457798MB (937571968 512 byte sectors)
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
da4 at mpr0 bus 0 scbus15 target 4 lun 0
da4: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da4: Serial Number 5FG4EMWN
da4: 1200.000MB/s transfers
da4: Command Queueing enabled
da4: 15259648MB (31251759104 512 byte sectors)
da0 at mpr0 bus 0 scbus15 target 0 lun 0
da0: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da0: Serial Number 5FG57BSN
da0: 1200.000MB/s transfers
da0: Command Queueing enabled
da0: 15259648MB (31251759104 512 byte sectors)
da9 at mpr0 bus 0 scbus15 target 9 lun 0
da9: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da9: Serial Number 5FG52PNN
da9: 1200.000MB/s transfers
da9: Command Queueing enabled
da9: 15259648MB (31251759104 512 byte sectors)
ses1 at ahciem1 bus 0 scbus11 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
da7 at mpr0 bus 0 scbus15 target 7 lun 0
da7: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da7: Serial Number 5FG54M7N
da7: 1200.000MB/s transfers
da7: Command Queueing enabled
da7: 15259648MB (31251759104 512 byte sectors)
da6 at mpr0 bus 0 scbus15 target 6 lun 0
da6: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da6: Serial Number 5FG4Y45N
da6: 1200.000MB/s transfers
da6: Command Queueing enabled
da6: 15259648MB (31251759104 512 byte sectors)
da1 at mpr0 bus 0 scbus15 target 1 lun 0
da1: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da1: Serial Number 5FG4DDTN
da1: 1200.000MB/s transfers
da1: Command Queueing enabled
da1: 15259648MB (31251759104 512 byte sectors)
da10 at mpr0 bus 0 scbus15 target 10 lun 0
da10: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da10: Serial Number 5FG4Z5EN
da10: 1200.000MB/s transfers
da10: Command Queueing enabled
da10: 15259648MB (31251759104 512 byte sectors)
da3 at mpr0 bus 0 scbus15 target 3 lun 0
da3: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da3: Serial Number 5FG52WTN
da3: 1200.000MB/s transfers
da3: Command Queueing enabled
da3: 15259648MB (31251759104 512 byte sectors)
da8 at mpr0 bus 0 scbus15 target 8 lun 0
da8: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da8: Serial Number 5FG5482N
da8: 1200.000MB/s transfers
da8: Command Queueing enabled
da8: 15259648MB (31251759104 512 byte sectors)
da2 at mpr0 bus 0 scbus15 target 2 lun 0
da2: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da2: Serial Number 5FG57ADN
da2: 1200.000MB/s transfers
da2: Command Queueing enabled
da2: 15259648MB (31251759104 512 byte sectors)
da5 at mpr0 bus 0 scbus15 target 5 lun 0
da5: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da5: Serial Number 5FG58AMN
da5: 1200.000MB/s transfers
da5: Command Queueing enabled
da5: 15259648MB (31251759104 512 byte sectors)
da11 at mpr0 bus 0 scbus15 target 11 lun 0
da11: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da11: Serial Number 5FG58K4N
da11: 1200.000MB/s transfers
da11: Command Queueing enabled
da11: 15259648MB (31251759104 512 byte sectors)
ses2 at mpr0 bus 0 scbus15 target 12 lun 0
ses2: <DP BP_PSV 7.10> Fixed Enclosure Services SPC-5 SCSI device
ses2: Serial Number 3F4EE080580D2100
ses2: 300.000MB/s transfers
ses2: SES Device
pass3 at ahcich12 bus 0 scbus14 target 0 lun 0
pass3: <Marvell Console 1.01> Removable Processor SCSI device
pass3: Serial Number HKDP221516WL
pass3: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes)
ses2: da8,pass12 in Array Device Slot 1, SAS Slot: 1 phys at slot 8
ses2:  phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2:  phy 0: parent 5f4ee080584f0700 addr 5000cca2cc095765
ses2: da9,pass13 in Array Device Slot 2, SAS Slot: 1 phys at slot 9
ses2:  phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2:  phy 0: parent 5f4ee080584f0701 addr 5000cca2cc093ff1
ses2: da10,pass14 in Array Device Slot 3, SAS Slot: 1 phys at slot 10
ses2:  phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2:  phy 0: parent 5f4ee080584f0702 addr 5000cca2cc090b09
ses2: da11,pass15 in Array Device Slot 4, SAS Slot: 1 phys at slot 11
ses2:  phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2:  phy 0: parent 5f4ee080584f0703 addr 5000cca2cc0997d9
ses2: da0,pass4 in Array Device Slot 9, SAS Slot: 1 phys at slot 0
ses2:  phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2:  phy 0: parent 5f4ee080584f0708 addr 5000cca2cc098639
ses2: da1,pass5 in Array Device Slot 10, SAS Slot: 1 phys at slot 1
ses2:  phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2:  phy 0: parent 5f4ee080584f0709 addr 5000cca2cc080051
ses2: da2,pass6 in Array Device Slot 11, SAS Slot: 1 phys at slot 2
ses2:  phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2:  phy 0: parent 5f4ee080584f070a addr 5000cca2cc098591
ses2: da3,pass7 in Array Device Slot 12, SAS Slot: 1 phys at slot 3
ses2:  phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2:  phy 0: parent 5f4ee080584f070b addr 5000cca2cc0942e9
ses2: da4,pass8 in Array Device Slot 13, SAS Slot: 1 phys at slot 4
ses2:  phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2:  phy 0: parent 5f4ee080584f070c addr 5000cca2cc0812c5
ses2: da5,pass9 in Array Device Slot 14, SAS Slot: 1 phys at slot 5
ses2:  phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2:  phy 0: parent 5f4ee080584f070d addr 5000cca2cc0994b1
ses2: da6,pass10 in Array Device Slot 15, SAS Slot: 1 phys at slot 6
ses2:  phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2:  phy 0: parent 5f4ee080584f070e addr 5000cca2cc08fb69
ses2: da7,pass11 in Array Device Slot 16, SAS Slot: 1 phys at slot 7
ses2:  phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2:  phy 0: parent 5f4ee080584f070f addr 5000cca2cc095ccd

 

[m0nk3ys33]

TrueNAS 13.0 (also crashes on boot):

Code:

Booting from AHCI Controller in SL 6: EFI Fixed Disk Boot Device 1

>> FreeBSD EFI boot block
   Loader path: /boot/loader.efi

   Initializing modules: ZFS UFS
   Load Path: \EFI\BOOT\BOOTX64.EFI
   Load Device: PciRoot(0x0)/Pci(0x1D,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(1,GPT,10089780-3C36-11EE-8E03-C84BD69C45AA,0x28,0x82000)
   BootCurrent: 0000
   BootOrder: 0005 0006 0003 0000[*]
   Probing 16 block devices...not supported
not supported
better
not supported
not supported
not supported
not supported
not supported
not supported
not supported
not supported
not supported
not supported
not supported
not supported
not supported
 done
    ZFS found the following pools: boot-pool
    UFS found no partitions
Consoles: EFI console
    Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p2:
FreeBSD/amd64 EFI loader, Revision 1.1

   Command line arguments: loader.efi
   Image base: 0x45772000
   EFI version: 2.70
   EFI Firmware: Dell Inc. (rev 522.257)
   Console: efi (0x20000000)
   Load Path: HD(2,GPT,101136DC-3C36-11EE-8E03-C84BD69C45AA,0x2082028,0x35DA0000)
   Load Device: PciRoot(0x0)/Pci(0x1D,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(2,GPT,101136DC-3C36-11EE-8E03-C84BD69C45AA,0x2082028,0x35DA0000)
   BootCurrent: 0000
   BootOrder: 0005 0006 0003 0000[*]
   BootInfo Path: PciRoot(0x0)/Pci(0x1D,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(1,GPT,10089780-3C36-11EE-8E03-C84BD69C45AA,0x28,0x82000)
Ignoring Boot0000: Only one DP found
Trying ZFS pool
Setting currdev to zfs:boot-pool/ROOT/default:
-


Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
-
?c-
-  ______               _     _   __    _____
  |__  __|             | \   | | /  \  /  ___|
    |  | _ __   __  ___|  \  | |/ /\ \|  (__
    |  || '__|| | |/ _ \ |\\ | | |__| |\___ \
    |  || | | |_| |  __/ | \\| |  __  |____) |
    |__||_| |_____|\_\ |_|  \ _|_| _|_|_____/

 /-------------------------- Welcome to TrueNAS ----------------------------\
 |                                                                          |
 |  1. Boot TrueNAS [Enter]                            :dd  dd:             |
 |  2. Boot TrueNAS (Serial Console)                :ddMMd  dMMdd::         |
 |  3. Escape to loader prompt                  ::dMMMMMMd  dMMMMMMd::      |
 |  4. Reboot                                 :dMMMMMMMdd:  :ddMMMMMMMd:    |
 |                                           :  :ddMdd:  ::::  :ddMdd:  :   |
 |  Options:                                 Md::  :  ::dMMMMd::  :  ::dd   |
 |  5. Kernel: default/kernel (1 of 2)       MMMMdd:  ::dMMMMd::  :ddMMMd   |
 |  6. Boot Options                          MMMMMMMdd:  ::::  :ddMMMMMMd   |
 |                                           ::dMMMMMMMdd:  :ddMMMMMMMd::   |
 |                                              ::dMMMMMMd  dMMMMMMd::      |
 |                                                 ::ddMMd  dMMdd::         |
 |                                                     :dd  dd:-            |
 \--------------------------------------------------------------------------/
   Autoboot in 0 seconds. [Space] to pause

Loading kernel...
/boot/kernel/kernel text=0x183168 text=0xe03be0 text=0x82714c data=0x140 data=0x25d3bc+0x5a1c44 syms=[0x8+0x1b31c8+0x8+0x20d6f3]
Loading configured modules...
can't find '/boot/entropy'
/boot/kernel/ispfw.ko size 0x859a0 at 0x25c1000
/boot/kernel/if_qlxgbe.ko size 0x224328 at 0x2647000
/boot/kernel/ipmi.ko size 0x11968 at 0x286c000
loading required module 'smbus'
/boot/kernel/smbus.ko size 0x3cb0 at 0x287e000
can't find '/etc/hostid'
/boot/kernel/if_bnxt.ko size 0x32cf8 at 0x2882000
/boot/kernel/hptnr.ko size 0x839c8 at 0x28b5000
/boot/kernel/hpt27xx.ko size 0x11bac0 at 0x2939000
/boot/kernel/hptrr.ko size 0x9ce58 at 0x2a55000
/boot/modules/if_atlantic.ko size 0x175b8 at 0x2af2000
/boot/modules/openzfs.ko size 0x5a8ab8 at 0x2b0a000
/boot/kernel/ice_ddp.ko size 0xa7cf8 at 0x30b3000
staging 0x3d800000 (not copying) tramp 0x3d771000 PT4 0x3d768000
Start @ 0xffffffff80384000 ...
EFI framebuffer information:
addr, size     0x91000000, 0x300000
dimensions     1024 x 768
stride         1024
masks          0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE-p7 n245428-4dfb91682c1 TRUENAS amd64
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) Silver 4310 CPU @ 2.10GHz (2100.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x606a6  Family=0x6  Model=0x6a  Stepping=6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0xf3bfbfff<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
  Structured Extended Features2=0x40417f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,TME,AVX512VPOPCNTDQ,LA57,RDPID,SGXLC>
  Structured Extended Features3=0xbc040412<FSRM,MD_CLEAR,PCONFIG,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x6bdeb<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL,TAA_NO>
  AMD Extended Feature Extensions ID EBX=0x200<WBNOINVD>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 32737931264 (31221 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 48 CPUs
FreeBSD/SMP: 2 package(s) x 12 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0: MADT APIC ID 8 != hw id 13
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1 19 22 21 46 36 28 44 18 13 9 14 45 6 24 38 16 31 10 42 5 30 27 32 12 33 37 15 2 25 43 47 40 11 7 23 39 3 4 26 41 20 8 17 34 29 35
random: entropy device external interface
kbd0 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
padlock0: No ACE support.
acpi0: <DELL PE_SC3>
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 350
Event timer "HPET1" frequency 24000000 Hz quality 340
Event timer "HPET2" frequency 24000000 Hz quality 340
Event timer "HPET3" frequency 24000000 Hz quality 340
Event timer "HPET4" frequency 24000000 Hz quality 340
Event timer "HPET5" frequency 24000000 Hz quality 340
Event timer "HPET6" frequency 24000000 Hz quality 340
Event timer "HPET7" frequency 24000000 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pci0: <unknown> at device 2.4 (no driver attached)
pci0: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Lewisburg AHCI SATA controller> port 0x3068-0x306f,0x3074-0x3077,0x3040-0x305f mem 0x92efa000-0x92efbfff,0x92f05000-0x92f050ff,0x92c80000-0x92cfffff at device 17.5 numa-domain 0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Lewisburg USB 3.0 controller> mem 0x92ee0000-0x92eeffff at device 20.0 numa-domain 0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
pci0: <simple comms> at device 22.4 (no driver attached)
ahci1: <Intel Lewisburg AHCI SATA controller> port 0x3060-0x3067,0x3070-0x3073,0x3020-0x303f mem 0x92ef8000-0x92ef9fff,0x92f04000-0x92f040ff,0x92c00000-0x92c7ffff at device 23.0 numa-domain 0 on pci0
ahci1: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich5: <AHCI channel> at channel 3 on ahci1
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich7: <AHCI channel> at channel 5 on ahci1
ahcich8: <AHCI channel> at channel 6 on ahci1
ahcich9: <AHCI channel> at channel 7 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib1: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci2
pci3: <PCI bus> numa-domain 0 on pcib3
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92808000-0x9280bfff,0x92000000-0x927fffff at device 0.0 numa-domain 0 on pci3
vgapci0: Boot video device
pcib4: <ACPI PCI-PCI bridge> at device 28.5 numa-domain 0 on pci0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pci0:4:0:0: no valid vpd ident found
pci0:4:0:0: failed to read VPD data.
bge0: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0x92930000-0x9293ffff,0x92940000-0x9294ffff,0x92950000-0x9295ffff at device 0.0 numa-domain 0 on pci4
bge0: APE FW version: NCSI v1.5.42.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: c8:4b:d6:9c:45:aa
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x92900000-0x9290ffff,0x92910000-0x9291ffff,0x92920000-0x9292ffff at device 0.1 numa-domain 0 on pci4
bge1: APE FW version: NCSI v1.5.42.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: c8:4b:d6:9c:45:ab
pcib5: <ACPI PCI-PCI bridge> at device 29.0 numa-domain 0 on pci0
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
ahci2: <Marvell 88SE9230 AHCI SATA controller> port 0x2028-0x202f,0x2034-0x2037,0x2020-0x2027,0x2030-0x2033,0x2000-0x201f mem 0x92b00000-0x92b007ff at device 0.0 numa-domain 0 on pci5
ahci2: AHCI v1.20 with 3 6Gbps ports, Port Multiplier not supported
ahci2: quirks=0x1000900<NOBSYRES,ALTSIG,IOMMU_BUSWIDE>
ahcich10: <AHCI channel> at channel 0 on ahci2
ahcich11: <AHCI channel> at channel 1 on ahci2
ahcich12: <AHCI channel> at channel 2 on ahci2
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
pci0: <memory> at device 31.2 (no driver attached)
pci0: <serial bus> at device 31.5 (no driver attached)
pcib6: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib6: could not evaluate _ADR - AE_NOT_FOUND
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> mem 0x21fffff00000-0x21fffff1ffff at device 2.0 numa-domain 0 on pci6
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
mpr0: <Broadcom Inc. (LSI) HARD SEC SAS3816> port 0x5000-0x50ff mem 0x9b800000-0x9b8fffff,0x9b900000-0x9b9fffff,0x9ba00000-0x9bafffff at device 0.0 numa-domain 0 on pci7
mpr0: Firmware: 24.15.03.00, Driver: 23.00.00.00-fbsd
mpr0: IOCCapabilities: 2fa84c<ScsiTaskFull,DiagTrace,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray,AtomicReqDesc>
pcib8: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib8: could not evaluate _ADR - AE_NOT_FOUND
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> mem 0x22fffff00000-0x22fffff1ffff at device 4.0 numa-domain 0 on pci8
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6610000-0xa661ffff,0xa6500000-0xa65fffff,0xa6622000-0xa6623fff at device 0.0 numa-domain 0 on pci9
bnxt0: Using 256 TX descriptors and 256 RX descriptors
bnxt0: Using 0 RX queues 0 TX queues
bnxt0: Using MSI-X interrupts with 1 vectors
bnxt0: iflib_dma_alloc_align: bus_dma_tag_create failed: 22
bnxt0: Unable to allocate device TX queue
bnxt0: Unable to allocate queue memory
device_attach: bnxt0 attach returned 22
Warning: failed attempt to remove oid fc with child autoneg
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%desc)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%driver)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%location)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%pnpinfo)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%parent)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%domain)!
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6600000-0xa660ffff,0xa6400000-0xa64fffff,0xa6620000-0xa6621fff at device 0.1 numa-domain 0 on pci9
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.driver_version)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_qs_enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.disable_msix)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.rx_budget)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.tx_abdicate)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.core_offset)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.separate_txrx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.use_logical_cores)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.mfg_id)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.device_id)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.sector_size)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.size)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.reserved_size)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.available_size)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.rss_key)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.rss_type)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.rx_stall)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.vlan_strip)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.if_name)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_rx_usecs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_rx_frames)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_rx_usecs_irq)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_rx_frames_irq)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_tx_usecs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_tx_frames)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_tx_usecs_irq)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_tx_frames_irq)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.gro_mode)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.max_agg_segs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.max_aggs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.min_agg_len)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.fc.tx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.fc.rx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.fc.autoneg)!
bnxt0: Using 256 TX descriptors and 256 RX descriptors
bnxt0: Using 0 RX queues 0 TX queues
bnxt0: Using MSI-X interrupts with 1 vectors
bnxt0: iflib_dma_alloc_align: bus_dma_tag_create failed: 22
bnxt0: Unable to allocate device TX queue
bnxt0: Unable to allocate queue memory
device_attach: bnxt0 attach returned 22
pcib10: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib10: could not evaluate _ADR - AE_NOT_FOUND
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib11: could not evaluate _ADR - AE_NOT_FOUND
pci11: <ACPI PCI bus> numa-domain 0 on pcib11
pcib12: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib12: could not evaluate _ADR - AE_NOT_FOUND
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pci12: <dasp, performance counters> at device 12.0 (no driver attached)
pci12: <dasp, performance counters> at device 13.0 (no driver attached)
pci12: <dasp, performance counters> at device 14.0 (no driver attached)
pci12: <dasp, performance counters> at device 15.0 (no driver attached)
pci12: <dasp, performance counters> at device 26.0 (no driver attached)
pci12: <dasp, performance counters> at device 27.0 (no driver attached)
pci12: <dasp, performance counters> at device 28.0 (no driver attached)
pci12: <dasp, performance counters> at device 29.0 (no driver attached)
pcib13: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib13: could not evaluate _ADR - AE_NOT_FOUND
pci13: <ACPI PCI bus> numa-domain 0 on pcib13
pcib14: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib14: could not evaluate _ADR - AE_NOT_FOUND
pci14: <ACPI PCI bus> numa-domain 1 on pcib14
pci14: <unknown> at device 2.4 (no driver attached)
pcib15: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib15: could not evaluate _ADR - AE_NOT_FOUND
pci15: <ACPI PCI bus> numa-domain 1 on pcib15
pcib16: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib16: could not evaluate _ADR - AE_NOT_FOUND
pci16: <ACPI PCI bus> numa-domain 1 on pcib16
pcib17: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib17: could not evaluate _ADR - AE_NOT_FOUND
pci17: <ACPI PCI bus> numa-domain 1 on pcib17
pcib18: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib18: could not evaluate _ADR - AE_NOT_FOUND
pci18: <ACPI PCI bus> numa-domain 1 on pcib18
pcib19: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib19: could not evaluate _ADR - AE_NOT_FOUND
pci19: <ACPI PCI bus> numa-domain 1 on pcib19
pci19: <dasp, performance counters> at device 12.0 (no driver attached)
pci19: <dasp, performance counters> at device 13.0 (no driver attached)
pci19: <dasp, performance counters> at device 14.0 (no driver attached)
pci19: <dasp, performance counters> at device 15.0 (no driver attached)
pci19: <dasp, performance counters> at device 26.0 (no driver attached)
pci19: <dasp, performance counters> at device 27.0 (no driver attached)
pci19: <dasp, performance counters> at device 28.0 (no driver attached)
pci19: <dasp, performance counters> at device 29.0 (no driver attached)
pcib20: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib20: could not evaluate _ADR - AE_NOT_FOUND
pci20: <ACPI PCI bus> numa-domain 1 on pcib20
apei0: <ACPI Platform Error Interface> on acpi0
cpu0: <ACPI CPU> numa-domain 0 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
ipmi0: <IPMI System Interface> port 0xca8,0xcac irq 10 on acpi0
ipmi0: KCS mode found at io 0xca8 on acpi
ichwd0: <Lewisburg watchdog timer> at port 0x400-0x41f iomem 0xfdc6000c-0xfdc6000f on isa0
orm0: <ISA Option ROM> at iomem 0xed800-0xf17ff pnpid ORM0000 on isa0
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est7 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est8 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est9 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est10 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est11 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est12 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est13 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est14 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est15 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est16 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est17 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est18 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est19 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est20 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est21 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est22 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est23 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est24 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est25 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est26 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est27 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est28 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est29 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est30 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est31 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est32 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est33 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est34 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est35 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est36 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est37 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est38 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est39 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est40 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est41 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est42 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est43 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est44 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est45 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est46 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est47 attach returned 6
Timecounter "TSC" frequency 2095077550 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 numa-domain 0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ipmi0: IPMI device rev. 1, firmware rev. 7.00, version 2.0, device support mask 0xdf
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0017> enclosureHandle<0x0002> slot 8
mpr0: At enclosure level 1 and connector name (C1  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0020> enclosureHandle<0x0002> slot 9
mpr0: At enclosure level 1 and connector name (C1  )
ipmi0: Number of channels 2
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0021> enclosureHandle<0x0002> slot 10
mpr0: At enclosure level 1 and connector name (C1  )
ipmi0: Attached watchdog
ipmi0: Establishing power cycle handler
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0022> enclosureHandle<0x0002> slot 11
mpr0: At enclosure level 1 and connector name (C1  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0018> enclosureHandle<0x0002> slot 0
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0019> enclosureHandle<0x0002> slot 1
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001a> enclosureHandle<0x0002> slot 2
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001b> enclosureHandle<0x0002> slot 3
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001c> enclosureHandle<0x0002> slot 4
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001d> enclosureHandle<0x0002> slot 5
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001e> enclosureHandle<0x0002> slot 6
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001f> enclosureHandle<0x0002> slot 7
mpr0: At enclosure level 1 and connector name (C0  )
mpr0: Found device <5c01<SspTarg,Direct,LsiDev,SepDev>,End Device> <3.0Gbps> handle<0x0012> enclosureHandle<0x0002> slot 12
mpr0: At enclosure level 1 and connector name (C0  )
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%desc)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%driver)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%location)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%pnpinfo)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%parent)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%domain)!
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6610000-0xa661ffff,0xa6500000-0xa65fffff,0xa6622000-0xa6623fff at device 0.0 numa-domain 0 on pci9
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.driver_version)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_qs_enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.disable_msix)!
ahcich10: stopping AHCI engine failed
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.rx_budget)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.tx_abdicate)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.core_offset)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.separate_txrx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.use_logical_cores)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxds)!
bnxt0: PCI BAR0 mapping failure
bnxt0: IFDI_ATTACH_PRE failed 6
device_attach: bnxt0 attach returned 6
pci0:49:0:0: Device leaked memory resources
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%desc)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%driver)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%location)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%pnpinfo)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%parent)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%domain)!
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6600000-0xa660ffff,0xa6400000-0xa64fffff,0xa6620000-0xa6621fff at device 0.1 numa-domain 0 on pci9
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.driver_version)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_qs_enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.disable_msix)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.rx_budget)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.tx_abdicate)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.core_offset)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.separate_txrx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.use_logical_cores)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxds)!
bnxt0: PCI BAR0 mapping failure
bnxt0: IFDI_ATTACH_PRE failed 6
device_attach: bnxt0 attach returned 6
pci0:49:0:1: Device leaked memory resources
ahcich12: stopping AHCI engine failed
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%desc)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%driver)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%location)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%pnpinfo)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%parent)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%domain)!
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6610000-0xa661ffff,0xa6500000-0xa65fffff,0xa6622000-0xa6623fff at device 0.0 numa-domain 0 on pci9
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.driver_version)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_qs_enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.disable_msix)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.rx_budget)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.tx_abdicate)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.core_offset)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.separate_txrx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.use_logical_cores)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxds)!


Fatal trap 9: general protection fault while in kernel mode
cpuid = 47; apic id = 57
instruction pointer    = 0x20:0xffffffff80b645c0
stack pointer            = 0x28:0xffffffff832d4cd0
frame pointer            = 0x28:0xffffffff832d4d10
code segment        = base 0x0, limit 0xfffff, type 0x1b
            = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags    = interrupt enabled, resume, IOPL = 0
current process        = 0 (swapper)
trap number        = 9
panic: general protection fault
cpuid = 47
time = 2
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff832d4af0
vpanic() at vpanic+0x17f/frame 0xffffffff832d4b40
panic() at panic+0x43/frame 0xffffffff832d4ba0
trap_fatal() at trap_fatal+0x385/frame 0xffffffff832d4c00
calltrap() at calltrap+0x8/frame 0xffffffff832d4c00
--- trap 0x9, rip = 0xffffffff80b645c0, rsp = 0xffffffff832d4cd0, rbp = 0xffffffff832d4d10 ---
taskqgroup_attach() at taskqgroup_attach+0x130/frame 0xffffffff832d4d10
bnxt_attach_pre() at bnxt_attach_pre+0x748/frame 0xffffffff832d4d80
iflib_device_register() at iflib_device_register+0x155/frame 0xffffffff832d4e10
iflib_device_attach() at iflib_device_attach+0xb5/frame 0xffffffff832d4e40
device_attach() at device_attach+0x3c3/frame 0xffffffff832d4e90
device_probe_and_attach() at device_probe_and_attach+0x41/frame 0xffffffff832d4ec0
pci_driver_added() at pci_driver_added+0xf3/frame 0xffffffff832d4f00
devclass_driver_added() at devclass_driver_added+0x39/frame 0xffffffff832d4f40
devclass_add_driver() at devclass_add_driver+0x13d/frame 0xffffffff832d4f80
_linux_pci_register_driver() at _linux_pci_register_driver+0xe6/frame 0xffffffff832d4fb0
init() at init+0x12/frame 0xffffffff832d4fd0
mi_startup() at mi_startup+0xdf/frame 0xffffffff832d4ff0
btext() at btext+0x22
KDB: enter: panic
[ thread pid 0 tid 100000 ]
Stopped at      kdb_enter+0x37: movq    $0,0x141d7fe(%rip)
db>

 

[m0nk3ys33]

Both FreeBSD 13.1 & 13.2 install/run without problems. Could this be caused by certain necessary drivers in the latest FreeBSD releases that are not yet included in Core?

 

[Ericloewe]

Both FreeBSD 13.1 & 13.2 install/run without problems. Could this be caused by certain necessary drivers in the latest FreeBSD releases that are not yet included in Core?

Possibly missing patches or something, but it's a bit weird.

There are a couple of things from the boot log that catch my attention:

1. The Broadcom driver does not seem to be a happy camper, and after it seems to freak out, the PCI driver also starts complaining.
2. The "CPU supports Enhanced Speedstep, but is not recognized." thing is suspicious. Are you running the latest system firmware? M
3. The panic's traceback seems to originate within the Broadcom driver.

So, Broadcom NICs have never really worked well with FreeBSD, so the low-hanging fruit is to try a different NIC. The slightly less-low-hanging fruit is to figure out what is up with the Broadcom driver.

 

[unseen]

The line:

ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported

Is also disturbing if that's what your mirrored boot disks are connected to.

 

[Ericloewe]

I'm pretty sure that's just boilerplate from the driver, the BOSS-S2 as Dell calls it has an unremarkable SATA controller from Marvell or ASMedia or something to that effect, with two ports and crap-grade integrated RAID capabilities that are meant to be somewhat enough for OS boot media.

 

[m0nk3ys33]

Tried the latest test ISO for TrueNAS 13.1 released today, and it both installed and boots without crashing:

Consoles: EFI console
Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p2:
FreeBSD/amd64 EFI loader, Revision 1.1

Command line arguments: loader.efi
Image base: 0x4576e000
EFI version: 2.70
EFI Firmware: Dell Inc. (rev 522.257)
Console: efi (0x20000000)
Load Path: HD(2,GPT,9B3B6A82-40CE-11EE-B487-C84BD69C45AA,0x2082028,0x35DA0000)
Load Device: PciRoot(0x0)/Pci(0x1D,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(2,GPT,9B3B6A82-40CE-11EE-B487-C84BD69C45AA,0x2082028,0x35DA0000)
BootCurrent: 0000
BootOrder: 0005 0006 0003 0004 0000[*]
BootInfo Path: PciRoot(0x0)/Pci(0x1D,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(1,GPT,9B315D12-40CE-11EE-B487-C84BD69C45AA,0x28,0x82000)
Ignoring Boot0000: Only one DP found
Trying ZFS pool
Setting currdev to zfs:boot-pool/ROOT/default:
\


Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
|
?c|
| ______ _ _ __ _____
|__ __| | \ | | / \ / ___|
| | _ __ __ ___| \ | |/ /\ \| (__
| || '__|| | |/ _ \ |\\ | | |__| |\___ \
| || | | |_| | __/ | \\| | __ |____) |
|__||_| |_____|\_\ |_| \ _|_| _|_|_____/

/-------------------------- Welcome to TrueNAS ----------------------------\
| |
| 1. Boot TrueNAS [Enter] :dd dd: |
| 2. Boot TrueNAS (Serial Console) :ddMMd dMMdd:: |
| 3. Escape to loader prompt ::dMMMMMMd dMMMMMMd:: |
| 4. Reboot :dMMMMMMMdd: :ddMMMMMMMd: |
| : :ddMdd: :::: :ddMdd: : |
| Options: Md:: : ::dMMMMd:: : ::dd |
| 5. Kernel: default/kernel (1 of 2) MMMMdd: ::dMMMMd:: :ddMMMd |
| 6. Boot Options MMMMMMMdd: :::: :ddMMMMMMd |
| ::dMMMMMMMdd: :ddMMMMMMMd:: |
| ::dMMMMMMd dMMMMMMd:: |
| ::ddMMd dMMdd:: |
| :dd dd:/ |
\--------------------------------------------------------------------------/
Autoboot in 0 seconds. [Space] to pause

Loading kernel...
/boot/kernel/kernel text=0x188718 text=0xdf5000 text=0x83778c data=0x140 data=0x2608fc+0x59e704 0x8+0x1b8d18+0x8+0x2132b0\
Loading configured modules...
/boot/kernel/ispfw.ko size 0x859a0 at 0x25cc000
/boot/kernel/if_bnxt.ko size 0x3f9e0 at 0x2652000
/boot/kernel/hptrr.ko size 0x9ce80 at 0x2692000
/boot/kernel/hpt27xx.ko size 0x11b9d8 at 0x272f000
/boot/modules/if_atlantic.ko size 0x17348 at 0x284b000
/boot/kernel/ipmi.ko size 0x119e0 at 0x2863000
loading required module 'smbus'
/boot/kernel/smbus.ko size 0x3cb0 at 0x2875000
/boot/modules/openzfs.ko size 0x5c34d0 at 0x2879000
/boot/kernel/hptnr.ko size 0x838f8 at 0x2e3d000
can't find '/etc/hostid'
/boot/kernel/ice_ddp.ko size 0xabd38 at 0x2ec1000
/boot/kernel/if_qlxgbe.ko size 0x224318 at 0x2f6d000
can't find '/boot/entropy'
staging 0x3d800000 (not copying) tramp 0x3d76d000 PT4 0x3d764000
Start @ 0xffffffff80389000 ...
EFI framebuffer information:
addr, size 0x91000000, 0x300000
dimensions 1024 x 768
stride 1024
masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.2-RELEASE-p2 truenas/13.1-stable-f18737daecb TRUENAS amd64
FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) Silver 4310 CPU @ 2.10GHz (2100.00-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x606a6 Family=0x6 Model=0x6a Stepping=6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0xf3bfbfff<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
Structured Extended Features2=0x40417f5e<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,TME,AVX512VPOPCNTDQ,LA57,RDPID,SGXLC>
Structured Extended Features3=0xbc040412<FSRM,MD_CLEAR,PCONFIG,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
IA32_ARCH_CAPS=0x6bdeb<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL,TAA_NO>
AMD Extended Feature Extensions ID EBX=0x200<WBNOINVD>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 32737935360 (31221 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 48 CPUs
FreeBSD/SMP: 2 package(s) x 12 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0: MADT APIC ID 8 != hw id 13
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1 25 38 19 46 13 42 39 14 28 32 34 12 15 27 33 6 35 21 18 4 17 26 23 7 36 11 37 30 44 29 41 24 16 22 20 45 10 43 5 2 40 8 47 3 31 9
random: entropy device external interface
kbd0 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
padlock0: No ACE support.
acpi0: <DELL PE_SC3>
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 350
Event timer "HPET1" frequency 24000000 Hz quality 340
Event timer "HPET2" frequency 24000000 Hz quality 340
Event timer "HPET3" frequency 24000000 Hz quality 340
Event timer "HPET4" frequency 24000000 Hz quality 340
Event timer "HPET5" frequency 24000000 Hz quality 340
Event timer "HPET6" frequency 24000000 Hz quality 340
Event timer "HPET7" frequency 24000000 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pci0: <unknown> at device 2.4 (no driver attached)
pci0: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Lewisburg AHCI SATA controller> port 0x3068-0x306f,0x3074-0x3077,0x3040-0x305f mem 0x92efa000-0x92efbfff,0x92f05000-0x92f050ff,0x92c80000-0x92cfffff at device 17.5 numa-domain 0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Lewisburg USB 3.0 controller> mem 0x92ee0000-0x92eeffff at device 20.0 numa-domain 0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
pci0: <simple comms> at device 22.4 (no driver attached)
ahci1: <Intel Lewisburg AHCI SATA controller> port 0x3060-0x3067,0x3070-0x3073,0x3020-0x303f mem 0x92ef8000-0x92ef9fff,0x92f04000-0x92f040ff,0x92c00000-0x92c7ffff at device 23.0 numa-domain 0 on pci0
ahci1: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich5: <AHCI channel> at channel 3 on ahci1
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich7: <AHCI channel> at channel 5 on ahci1
ahcich8: <AHCI channel> at channel 6 on ahci1
ahcich9: <AHCI channel> at channel 7 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib1: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci2
pci3: <PCI bus> numa-domain 0 on pcib3
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92808000-0x9280bfff,0x92000000-0x927fffff at device 0.0 numa-domain 0 on pci3
vgapci0: Boot video device
pcib4: <ACPI PCI-PCI bridge> at device 28.5 numa-domain 0 on pci0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pci0:4:0:0: no valid vpd ident found
pci0:4:0:0: failed to read VPD data.
bge0: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0x92930000-0x9293ffff,0x92940000-0x9294ffff,0x92950000-0x9295ffff at device 0.0 numa-domain 0 on pci4
bge0: APE FW version: NCSI v1.5.42.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: c8:4b:d6:9c:45:aa
pci0:4:0:1: no valid vpd ident found
pci0:4:0:1: failed to read VPD data.
bge1: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0x92900000-0x9290ffff,0x92910000-0x9291ffff,0x92920000-0x9292ffff at device 0.1 numa-domain 0 on pci4
bge1: APE FW version: NCSI v1.5.42.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: c8:4b:d6:9c:45:ab
pcib5: <ACPI PCI-PCI bridge> at device 29.0 numa-domain 0 on pci0
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
ahci2: <Marvell 88SE9230 AHCI SATA controller> port 0x2028-0x202f,0x2034-0x2037,0x2020-0x2027,0x2030-0x2033,0x2000-0x201f mem 0x92b00000-0x92b007ff at device 0.0 numa-domain 0 on pci5
ahci2: AHCI v1.20 with 3 6Gbps ports, Port Multiplier not supported
ahci2: quirks=0x3000900<NOBSYRES,ALTSIG,IOMMU_BUSWIDE,SLOWDEV>
ahcich10: <AHCI channel> at channel 0 on ahci2
ahcich11: <AHCI channel> at channel 1 on ahci2
ahcich12: <AHCI channel> at channel 2 on ahci2
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
pci0: <memory> at device 31.2 (no driver attached)
pci0: <serial bus> at device 31.5 (no driver attached)
pcib6: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib6: could not evaluate _ADR - AE_NOT_FOUND
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> mem 0x21fffff00000-0x21fffff1ffff at device 2.0 numa-domain 0 on pci6
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
mpr0: <Broadcom Inc. (LSI) HARD SEC SAS3816> port 0x5000-0x50ff mem 0x9b800000-0x9b8fffff,0x9b900000-0x9b9fffff,0x9ba00000-0x9bafffff at device 0.0 numa-domain 0 on pci7
mpr0: Firmware: 22.15.02.00, Driver: 23.00.00.00-fbsd
mpr0: IOCCapabilities: 2fa84c<ScsiTaskFull,DiagTrace,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray,AtomicReqDesc>
pcib8: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib8: could not evaluate _ADR - AE_NOT_FOUND
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> mem 0x22fffff00000-0x22fffff1ffff at device 4.0 numa-domain 0 on pci8
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6610000-0xa661ffff,0xa6500000-0xa65fffff,0xa6622000-0xa6623fff at device 0.0 numa-domain 0 on pci9
bnxt0: Using 256 TX descriptors and 256 RX descriptors
bnxt0: Using 12 RX queues 12 TX queues
bnxt0: Using MSI-X interrupts with 13 vectors
bnxt0: Ethernet address: 00:62:0b:27:00:30
bnxt0: Unknown phy type
bnxt1: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6600000-0xa660ffff,0xa6400000-0xa64fffff,0xa6620000-0xa6621fff at device 0.1 numa-domain 0 on pci9
bnxt1: Using 256 TX descriptors and 256 RX descriptors
bnxt1: Using 12 RX queues 12 TX queues
bnxt1: Using MSI-X interrupts with 13 vectors
bnxt1: Ethernet address: 00:62:0b:27:00:31
bnxt1: Unknown phy type
pcib10: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib10: could not evaluate _ADR - AE_NOT_FOUND
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib11: could not evaluate _ADR - AE_NOT_FOUND
pci11: <ACPI PCI bus> numa-domain 0 on pcib11
pcib12: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib12: could not evaluate _ADR - AE_NOT_FOUND
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pci12: <dasp, performance counters> at device 12.0 (no driver attached)
pci12: <dasp, performance counters> at device 13.0 (no driver attached)
pci12: <dasp, performance counters> at device 14.0 (no driver attached)
pci12: <dasp, performance counters> at device 15.0 (no driver attached)
pci12: <dasp, performance counters> at device 26.0 (no driver attached)
pci12: <dasp, performance counters> at device 27.0 (no driver attached)
pci12: <dasp, performance counters> at device 28.0 (no driver attached)
pci12: <dasp, performance counters> at device 29.0 (no driver attached)
pcib13: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib13: could not evaluate _ADR - AE_NOT_FOUND
pci13: <ACPI PCI bus> numa-domain 0 on pcib13
pcib14: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib14: could not evaluate _ADR - AE_NOT_FOUND
pci14: <ACPI PCI bus> numa-domain 1 on pcib14
pci14: <unknown> at device 2.4 (no driver attached)
pcib15: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib15: could not evaluate _ADR - AE_NOT_FOUND
pci15: <ACPI PCI bus> numa-domain 1 on pcib15
pcib16: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib16: could not evaluate _ADR - AE_NOT_FOUND
pci16: <ACPI PCI bus> numa-domain 1 on pcib16
pcib17: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib17: could not evaluate _ADR - AE_NOT_FOUND
pci17: <ACPI PCI bus> numa-domain 1 on pcib17
pcib18: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib18: could not evaluate _ADR - AE_NOT_FOUND
pci18: <ACPI PCI bus> numa-domain 1 on pcib18
pcib19: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib19: could not evaluate _ADR - AE_NOT_FOUND
pci19: <ACPI PCI bus> numa-domain 1 on pcib19
pci19: <dasp, performance counters> at device 12.0 (no driver attached)
pci19: <dasp, performance counters> at device 13.0 (no driver attached)
pci19: <dasp, performance counters> at device 14.0 (no driver attached)
pci19: <dasp, performance counters> at device 15.0 (no driver attached)
pci19: <dasp, performance counters> at device 26.0 (no driver attached)
pci19: <dasp, performance counters> at device 27.0 (no driver attached)
pci19: <dasp, performance counters> at device 28.0 (no driver attached)
pci19: <dasp, performance counters> at device 29.0 (no driver attached)
pcib20: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib20: could not evaluate _ADR - AE_NOT_FOUND
pci20: <ACPI PCI bus> numa-domain 1 on pcib20
apei0: <ACPI Platform Error Interface> on acpi0
cpu0: <ACPI CPU> numa-domain 0 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
ipmi0: <IPMI System Interface> port 0xca8,0xcac irq 10 on acpi0
ipmi0: KCS mode found at io 0xca8 on acpi
ichwd0: <Lewisburg watchdog timer> at port 0x400-0x41f iomem 0xfdc6000c-0xfdc6000f on isa0
orm0: <ISA Option ROM> at iomem 0xed800-0xf17ff pnpid ORM0000 on isa0
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est7 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est8 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est9 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est10 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est11 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est12 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est13 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est14 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est15 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est16 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est17 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est18 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d7000001b00
device_attach: est19 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est20 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est21 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est22 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est23 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est24 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est25 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est26 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est27 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est28 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est29 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est30 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d7000001b00
device_attach: est31 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est32 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est33 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est34 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d7000001b00
device_attach: est35 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est36 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est37 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est38 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est39 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est40 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est41 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est42 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est43 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est44 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est45 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est46 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est47 attach returned 6
Timecounter "TSC" frequency 2095077620 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 numa-domain 0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0017> enclosureHandle<0x0002> slot 8
mpr0: At enclosure level 1 and connector name (C1 )
ipmi0: IPMI device rev. 1, firmware rev. 7.00, version 2.0, device support mask 0xdf
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0018> enclosureHandle<0x0002> slot 9
mpr0: At enclosure level 1 and connector name (C1 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0019> enclosureHandle<0x0002> slot 10
mpr0: At enclosure level 1 and connector name (C1 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001a> enclosureHandle<0x0002> slot 11
mpr0: At enclosure level 1 and connector name (C1 )
ipmi0: Number of channels 2
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001b> enclosureHandle<0x0002> slot 0
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001c> enclosureHandle<0x0002> slot 1
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001d> enclosureHandle<0x0002> slot 2
mpr0: At enclosure level 1 and connector name (C0 )
ipmi0: Attached watchdog
ipmi0: Establishing power cycle handler
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001e> enclosureHandle<0x0002> slot 3
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001f> enclosureHandle<0x0002> slot 4
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0020> enclosureHandle<0x0002> slot 5
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0021> enclosureHandle<0x0002> slot 6
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0022> enclosureHandle<0x0002> slot 7
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <5c01<SspTarg,Direct,LsiDev,SepDev>,End Device> <3.0Gbps> handle<0x0012> enclosureHandle<0x0002> slot 12
mpr0: At enclosure level 1 and connector name (C0 )
ahcich10: stopping AHCI engine failed
ahcich12: stopping AHCI engine failed
ahcich12: stopping AHCI engine failed
Trying to mount root from zfs:boot-pool/ROOT/default []...
ahcich12: stopping AHCI engine failed
Root mount waiting for: CAM usbus0
uhub0: 26 ports with 26 removable, self powered
ugen0.2: <vendor 0x0424 product 0x2514> at usbus0
uhub1 numa-domain 0 on uhub0
uhub1: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 1> on usbus0
uhub1: MTT enabled
Root mount waiting for: CAM usbus0
uhub1: 4 ports with 3 removable, self powered
ugen0.3: <Apple Inc. Keyboard Hub> at usbus0
uhub2 numa-domain 0 on uhub1
uhub2: <Apple Inc. Keyboard Hub, class 9/0, rev 2.00/96.15, addr 2> on usbus0
Root mount waiting for: CAM usbus0
uhub2: 3 ports with 2 removable, bus powered
ugen0.4: <Apple Inc. Apple Keyboard> at usbus0
ukbd0 numa-domain 0 on uhub2
ukbd0: <Apple Inc. Apple Keyboard, class 0/0, rev 2.00/0.70, addr 3> on usbus0
kbd1 at ukbd0
uhid0 numa-domain 0 on uhub2
uhid0: <Apple Inc. Apple Keyboard, class 0/0, rev 2.00/0.70, addr 3> on usbus0
ahcich12: stopping AHCI engine failed
Root mount waiting for: CAM usbus0 ses
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus11 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ses2 at mpr0 bus 0 scbus15 target 12 lun 0
ses2: <DP BP_PSV 7.10> Fixed Enclosure Services SPC-5 SCSI device
ses2: Serial Number 30000000800D2100
ses2: 300.000MB/s transfers
ses2: SES Device
ada0 at ahcich10 bus 0 scbus12 target 0 lun 0
ada0: <DELLBOSS VD MV.R00-0> ATA8-ACS SATA 3.x device
ada0: Serial Number f07488ff27d80010
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 457798MB (937571968 512 byte sectors)
ses2: (none) in Array Device Slot 1, SAS Slot: 1 phys at slot 8
ses2: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2: phy 0: parent 5000000080000000 addr 5000cca2cc095765
ugen0.5: <vendor 0x1604 product 0x10c0> at usbus0
da8 at mpr0 bus 0 scbus15 target 8 lun 0
da8: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da8: Serial Number 5FG5482N
da8: 1200.000MB/s transfers
da8: Command Queueing enabled
da8: 15259648MB (31251759104 512 byte sectors)
pass3 at ahcich12 bus 0 scbus14 target 0 lun 0
pass3: <Marvell Console 1.01> Removable Processor SCSI device
pass3: Serial Number HKDP221516WL
pass3: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes)
da3 at mpr0 bus 0 scbus15 target 3 lun 0
da3: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da3: Serial Number 5FG52WTN
da3: 1200.000MB/s transfers
da3: Command Queueing enabled
da3: 15259648MB (31251759104 512 byte sectors)
da9 at mpr0 bus 0 scbus15 target 9 lun 0
da9: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da9: Serial Number 5FG52PNN
da9: 1200.000MB/s transfers
da9: Command Queueing enabled
da9: 15259648MB (31251759104 512 byte sectors)
da0 at mpr0 bus 0 scbus15 target 0 lun 0
da0: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da0: Serial Number 5FG57BSN
da0: 1200.000MB/s transfers
da0: Command Queueing enabled
da0: 15259648MB (31251759104 512 byte sectors)
uhub3 numa-domain 0 on uhub0
uhub3: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 4> on usbus0
da1 at mpr0 bus 0 scbus15 target 1 lun 0
da1: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da1: Serial Number 5FG4DDTN
da1: 1200.000MB/s transfers
da1: Command Queueing enabled
da1: 15259648MB (31251759104 512 byte sectors)
da4 at mpr0 bus 0 scbus15 target 4 lun 0
da4: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da4: Serial Number 5FG4EMWN
da4: 1200.000MB/s transfers
da4: Command Queueing enabled
da4: 15259648MB (31251759104 512 byte sectors)
da7 at mpr0 bus 0 scbus15 target 7 lun 0
da7: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da7: Serial Number 5FG54M7N
da7: 1200.000MB/s transfers
da7: Command Queueing enabled
da7: 15259648MB (31251759104 512 byte sectors)
da2 at mpr0 bus 0 scbus15 target 2 lun 0
da2: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da2: Serial Number 5FG57ADN
da2: 1200.000MB/s transfers
da2: Command Queueing enabled
da2: 15259648MB (31251759104 512 byte sectors)
da6 at mpr0 bus 0 scbus15 target 6 lun 0
da6: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da6: Serial Number 5FG4Y45N
da6: 1200.000MB/s transfers
da6: Command Queueing enabled
da6: 15259648MB (31251759104 512 byte sectors)
da5 at mpr0 bus 0 scbus15 target 5 lun 0
da5: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da5: Serial Number 5FG58AMN
da5: 1200.000MB/s transfers
da5: Command Queueing enabled
da5: 15259648MB (31251759104 512 byte sectors)
da10 at mpr0 bus 0 scbus15 target 10 lun 0
da10: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da10: Serial Number 5FG4Z5EN
da10: 1200.000MB/s transfers
da10: Command Queueing enabled
da10: 15259648MB (31251759104 512 byte sectors)
da11 at mpr0 bus 0 scbus15 target 11 lun 0
da11: <WDC WUH721816AL5205 UM06> Fixed Direct Access SPC-5 SCSI device
da11: Serial Number 5FG58K4N
da11: 1200.000MB/s transfers
da11: Command Queueing enabled
da11: 15259648MB (31251759104 512 byte sectors)
ses2: da9,pass13 in Array Device Slot 2, SAS Slot: 1 phys at slot 9
ses2: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2: phy 0: parent 5000000080000001 addr 5000cca2cc093ff1
ses2: da10,pass14 in Array Device Slot 3, SAS Slot: 1 phys at slot 10
ses2: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2: phy 0: parent 5000000080000002 addr 5000cca2cc090b09
ses2: da11,pass15 in Array Device Slot 4, SAS Slot: 1 phys at slot 11
ses2: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2: phy 0: parent 5000000080000003 addr 5000cca2cc0997d9
ses2: da0,pass4 in Array Device Slot 9, SAS Slot: 1 phys at slot 0
ses2: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2: phy 0: parent 5000000080000008 addr 5000cca2cc098639
ses2: da1,pass5 in Array Device Slot 10, SAS Slot: 1 phys at slot 1
ses2: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2: phy 0: parent 5000000080000009 addr 5000cca2cc080051
ses2: da2,pass6 in Array Device Slot 11, SAS Slot: 1 phys at slot 2
ses2: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2: phy 0: parent 500000008000000a addr 5000cca2cc098591
ses2: da3,pass7 in Array Device Slot 12, SAS Slot: 1 phys at slot 3
ses2: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2: phy 0: parent 500000008000000b addr 5000cca2cc0942e9
ses2: da4,pass8 in Array Device Slot 13, SAS Slot: 1 phys at slot 4
ses2: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2: phy 0: parent 500000008000000c addr 5000cca2cc0812c5
ses2: da5,pass9 in Array Device Slot 14, SAS Slot: 1 phys at slot 5
ses2: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2: phy 0: parent 500000008000000d addr 5000cca2cc0994b1
ses2: da6,pass10 in Array Device Slot 15, SAS Slot: 1 phys at slot 6
ses2: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2: phy 0: parent 500000008000000e addr 5000cca2cc08fb69
ses2: da7,pass11 in Array Device Slot 16, SAS Slot: 1 phys at slot 7
ses2: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses2: phy 0: parent 500000008000000f addr 5000cca2cc095ccd
Root mount waiting for: usbus0
uhub3: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.6: <vendor 0x1604 product 0x10c0> at usbus0
uhub4 numa-domain 0 on uhub3
uhub4: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 5> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub4: 4 ports with 4 removable, self powered
ugen0.7: <DELL DRAC 5 Virtual Keyboard and Mouse> at usbus0
ums0 numa-domain 0 on uhub3
ums0: <HID Interface> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ukbd1 numa-domain 0 on uhub3
ukbd1: <HID Interface> on usbus0
kbd2 at ukbd1
Root mount waiting for: usbus0
ugen0.8: <Dell(TM) iDRAC Virtual NIC USB Device> at usbus0
ugen0.9: <vendor 0x1604 product 0x10c0> at usbus0
uhub5 numa-domain 0 on uhub3
uhub5: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 8> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub5: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
Dual Console: Video Primary, Serial Secondary
KLD if_urndis.ko: depends on kernel - not available or version mismatch
linker_load_file: /boot/kernel/if_urndis.ko - unsupported file type
lo0: link state changed to UP
KLD vmm.ko: depends on kernel - not available or version mismatch
linker_load_file: /boot/kernel/vmm.ko - unsupported file type
KLD nmdm.ko: depends on kernel - not available or version mismatch
linker_load_file: /boot/kernel/nmdm.ko - unsupported file type
KLD dtraceall.ko: depends on kernel - not available or version mismatch
linker_load_file: /boot/kernel/dtraceall.ko - unsupported file type
KLD geom_multipath.ko: depends on kernel - not available or version mismatch
linker_load_file: /boot/kernel/geom_multipath.ko - unsupported file type
Deprecated code (to be removed in FreeBSD 14): FreeBSD 12.x ABI compat
Deprecated code (to be removed in FreeBSD 14): FreeBSD 12.x ABI compat
GEOM_ELI: Device da0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: accelerated software
KLD hwpmc.ko: depends on kernel - not available or version mismatch
linker_load_file: /boot/kernel/hwpmc.ko - unsupported file type
KLD toecore.ko: depends on kernel - not available or version mismatch
linker_load_file: /boot/kernel/toecore.ko - unsupported file type
KLD t4_tom.ko: depends on toecore - not available or version mismatch
linker_load_file: /boot/kernel/t4_tom.ko - unsupported file type
bge1: link state changed to DOWN
bge0: link state changed to DOWN
bge1: link state changed to UP
bge0: link state changed to UP
CPU: Intel(R) Xeon(R) Silver 4310 CPU @ 2.10GHz (2095.08-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x606a6 Family=0x6 Model=0x6a Stepping=6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0xf3bfbfff<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
Structured Extended Features2=0x40417f5e<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,TME,AVX512VPOPCNTDQ,LA57,RDPID,SGXLC>
Structured Extended Features3=0xbc040412<FSRM,MD_CLEAR,PCONFIG,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
IA32_ARCH_CAPS=0x6bdeb<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL,TAA_NO>
AMD Extended Feature Extensions ID EBX=0x200<WBNOINVD>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
KLD mac_ntpd.ko: depends on kernel - not available or version mismatch
linker_load_file: /boot/kernel/mac_ntpd.ko - unsupported file type