Code:
Booting from AHCI Controller in SL 6: EFI Fixed Disk Boot Device 1
>> FreeBSD EFI boot block
Loader path: /boot/loader.efi
Initializing modules: ZFS UFS
Load Path: \EFI\BOOT\BOOTX64.EFI
Load Device: PciRoot(0x0)/Pci(0x1D,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(1,GPT,10089780-3C36-11EE-8E03-C84BD69C45AA,0x28,0x82000)
BootCurrent: 0000
BootOrder: 0005 0006 0003 0000[*]
Probing 16 block devices...not supported
not supported
better
not supported
not supported
not supported
not supported
not supported
not supported
not supported
not supported
not supported
not supported
not supported
not supported
not supported
done
ZFS found the following pools: boot-pool
UFS found no partitions
Consoles: EFI console
Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p2:
FreeBSD/amd64 EFI loader, Revision 1.1
Command line arguments: loader.efi
Image base: 0x45772000
EFI version: 2.70
EFI Firmware: Dell Inc. (rev 522.257)
Console: efi (0x20000000)
Load Path: HD(2,GPT,101136DC-3C36-11EE-8E03-C84BD69C45AA,0x2082028,0x35DA0000)
Load Device: PciRoot(0x0)/Pci(0x1D,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(2,GPT,101136DC-3C36-11EE-8E03-C84BD69C45AA,0x2082028,0x35DA0000)
BootCurrent: 0000
BootOrder: 0005 0006 0003 0000[*]
BootInfo Path: PciRoot(0x0)/Pci(0x1D,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(1,GPT,10089780-3C36-11EE-8E03-C84BD69C45AA,0x28,0x82000)
Ignoring Boot0000: Only one DP found
Trying ZFS pool
Setting currdev to zfs:boot-pool/ROOT/default:
-
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
-
?c-
- ______ _ _ __ _____
|__ __| | \ | | / \ / ___|
| | _ __ __ ___| \ | |/ /\ \| (__
| || '__|| | |/ _ \ |\\ | | |__| |\___ \
| || | | |_| | __/ | \\| | __ |____) |
|__||_| |_____|\_\ |_| \ _|_| _|_|_____/
/-------------------------- Welcome to TrueNAS ----------------------------\
| |
| 1. Boot TrueNAS [Enter] :dd dd: |
| 2. Boot TrueNAS (Serial Console) :ddMMd dMMdd:: |
| 3. Escape to loader prompt ::dMMMMMMd dMMMMMMd:: |
| 4. Reboot :dMMMMMMMdd: :ddMMMMMMMd: |
| : :ddMdd: :::: :ddMdd: : |
| Options: Md:: : ::dMMMMd:: : ::dd |
| 5. Kernel: default/kernel (1 of 2) MMMMdd: ::dMMMMd:: :ddMMMd |
| 6. Boot Options MMMMMMMdd: :::: :ddMMMMMMd |
| ::dMMMMMMMdd: :ddMMMMMMMd:: |
| ::dMMMMMMd dMMMMMMd:: |
| ::ddMMd dMMdd:: |
| :dd dd:- |
\--------------------------------------------------------------------------/
Autoboot in 0 seconds. [Space] to pause
Loading kernel...
/boot/kernel/kernel text=0x183168 text=0xe03be0 text=0x82714c data=0x140 data=0x25d3bc+0x5a1c44 syms=[0x8+0x1b31c8+0x8+0x20d6f3]
Loading configured modules...
can't find '/boot/entropy'
/boot/kernel/ispfw.ko size 0x859a0 at 0x25c1000
/boot/kernel/if_qlxgbe.ko size 0x224328 at 0x2647000
/boot/kernel/ipmi.ko size 0x11968 at 0x286c000
loading required module 'smbus'
/boot/kernel/smbus.ko size 0x3cb0 at 0x287e000
can't find '/etc/hostid'
/boot/kernel/if_bnxt.ko size 0x32cf8 at 0x2882000
/boot/kernel/hptnr.ko size 0x839c8 at 0x28b5000
/boot/kernel/hpt27xx.ko size 0x11bac0 at 0x2939000
/boot/kernel/hptrr.ko size 0x9ce58 at 0x2a55000
/boot/modules/if_atlantic.ko size 0x175b8 at 0x2af2000
/boot/modules/openzfs.ko size 0x5a8ab8 at 0x2b0a000
/boot/kernel/ice_ddp.ko size 0xa7cf8 at 0x30b3000
staging 0x3d800000 (not copying) tramp 0x3d771000 PT4 0x3d768000
Start @ 0xffffffff80384000 ...
EFI framebuffer information:
addr, size 0x91000000, 0x300000
dimensions 1024 x 768
stride 1024
masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE-p7 n245428-4dfb91682c1 TRUENAS amd64
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) Silver 4310 CPU @ 2.10GHz (2100.00-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x606a6 Family=0x6 Model=0x6a Stepping=6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0xf3bfbfff<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
Structured Extended Features2=0x40417f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,TME,AVX512VPOPCNTDQ,LA57,RDPID,SGXLC>
Structured Extended Features3=0xbc040412<FSRM,MD_CLEAR,PCONFIG,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
IA32_ARCH_CAPS=0x6bdeb<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL,TAA_NO>
AMD Extended Feature Extensions ID EBX=0x200<WBNOINVD>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 32737931264 (31221 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 48 CPUs
FreeBSD/SMP: 2 package(s) x 12 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0: MADT APIC ID 8 != hw id 13
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1 19 22 21 46 36 28 44 18 13 9 14 45 6 24 38 16 31 10 42 5 30 27 32 12 33 37 15 2 25 43 47 40 11 7 23 39 3 4 26 41 20 8 17 34 29 35
random: entropy device external interface
kbd0 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
padlock0: No ACE support.
acpi0: <DELL PE_SC3>
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 350
Event timer "HPET1" frequency 24000000 Hz quality 340
Event timer "HPET2" frequency 24000000 Hz quality 340
Event timer "HPET3" frequency 24000000 Hz quality 340
Event timer "HPET4" frequency 24000000 Hz quality 340
Event timer "HPET5" frequency 24000000 Hz quality 340
Event timer "HPET6" frequency 24000000 Hz quality 340
Event timer "HPET7" frequency 24000000 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pci0: <unknown> at device 2.4 (no driver attached)
pci0: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Lewisburg AHCI SATA controller> port 0x3068-0x306f,0x3074-0x3077,0x3040-0x305f mem 0x92efa000-0x92efbfff,0x92f05000-0x92f050ff,0x92c80000-0x92cfffff at device 17.5 numa-domain 0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Lewisburg USB 3.0 controller> mem 0x92ee0000-0x92eeffff at device 20.0 numa-domain 0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
pci0: <simple comms> at device 22.4 (no driver attached)
ahci1: <Intel Lewisburg AHCI SATA controller> port 0x3060-0x3067,0x3070-0x3073,0x3020-0x303f mem 0x92ef8000-0x92ef9fff,0x92f04000-0x92f040ff,0x92c00000-0x92c7ffff at device 23.0 numa-domain 0 on pci0
ahci1: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich5: <AHCI channel> at channel 3 on ahci1
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich7: <AHCI channel> at channel 5 on ahci1
ahcich8: <AHCI channel> at channel 6 on ahci1
ahcich9: <AHCI channel> at channel 7 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib1: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci2
pci3: <PCI bus> numa-domain 0 on pcib3
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92808000-0x9280bfff,0x92000000-0x927fffff at device 0.0 numa-domain 0 on pci3
vgapci0: Boot video device
pcib4: <ACPI PCI-PCI bridge> at device 28.5 numa-domain 0 on pci0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pci0:4:0:0: no valid vpd ident found
pci0:4:0:0: failed to read VPD data.
bge0: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0x92930000-0x9293ffff,0x92940000-0x9294ffff,0x92950000-0x9295ffff at device 0.0 numa-domain 0 on pci4
bge0: APE FW version: NCSI v1.5.42.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: c8:4b:d6:9c:45:aa
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x92900000-0x9290ffff,0x92910000-0x9291ffff,0x92920000-0x9292ffff at device 0.1 numa-domain 0 on pci4
bge1: APE FW version: NCSI v1.5.42.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: c8:4b:d6:9c:45:ab
pcib5: <ACPI PCI-PCI bridge> at device 29.0 numa-domain 0 on pci0
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
ahci2: <Marvell 88SE9230 AHCI SATA controller> port 0x2028-0x202f,0x2034-0x2037,0x2020-0x2027,0x2030-0x2033,0x2000-0x201f mem 0x92b00000-0x92b007ff at device 0.0 numa-domain 0 on pci5
ahci2: AHCI v1.20 with 3 6Gbps ports, Port Multiplier not supported
ahci2: quirks=0x1000900<NOBSYRES,ALTSIG,IOMMU_BUSWIDE>
ahcich10: <AHCI channel> at channel 0 on ahci2
ahcich11: <AHCI channel> at channel 1 on ahci2
ahcich12: <AHCI channel> at channel 2 on ahci2
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
pci0: <memory> at device 31.2 (no driver attached)
pci0: <serial bus> at device 31.5 (no driver attached)
pcib6: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib6: could not evaluate _ADR - AE_NOT_FOUND
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> mem 0x21fffff00000-0x21fffff1ffff at device 2.0 numa-domain 0 on pci6
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
mpr0: <Broadcom Inc. (LSI) HARD SEC SAS3816> port 0x5000-0x50ff mem 0x9b800000-0x9b8fffff,0x9b900000-0x9b9fffff,0x9ba00000-0x9bafffff at device 0.0 numa-domain 0 on pci7
mpr0: Firmware: 24.15.03.00, Driver: 23.00.00.00-fbsd
mpr0: IOCCapabilities: 2fa84c<ScsiTaskFull,DiagTrace,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray,AtomicReqDesc>
pcib8: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib8: could not evaluate _ADR - AE_NOT_FOUND
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> mem 0x22fffff00000-0x22fffff1ffff at device 4.0 numa-domain 0 on pci8
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6610000-0xa661ffff,0xa6500000-0xa65fffff,0xa6622000-0xa6623fff at device 0.0 numa-domain 0 on pci9
bnxt0: Using 256 TX descriptors and 256 RX descriptors
bnxt0: Using 0 RX queues 0 TX queues
bnxt0: Using MSI-X interrupts with 1 vectors
bnxt0: iflib_dma_alloc_align: bus_dma_tag_create failed: 22
bnxt0: Unable to allocate device TX queue
bnxt0: Unable to allocate queue memory
device_attach: bnxt0 attach returned 22
Warning: failed attempt to remove oid fc with child autoneg
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%desc)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%driver)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%location)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%pnpinfo)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%parent)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%domain)!
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6600000-0xa660ffff,0xa6400000-0xa64fffff,0xa6620000-0xa6621fff at device 0.1 numa-domain 0 on pci9
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.driver_version)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_qs_enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.disable_msix)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.rx_budget)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.tx_abdicate)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.core_offset)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.separate_txrx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.use_logical_cores)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.mfg_id)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.device_id)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.sector_size)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.size)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.reserved_size)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.nvram.available_size)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.rss_key)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.rss_type)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.rx_stall)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.vlan_strip)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.if_name)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_rx_usecs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_rx_frames)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_rx_usecs_irq)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_rx_frames_irq)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_tx_usecs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_tx_frames)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_tx_usecs_irq)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.intr_coal_tx_frames_irq)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.gro_mode)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.max_agg_segs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.max_aggs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.hw_lro.min_agg_len)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.fc.tx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.fc.rx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.fc.autoneg)!
bnxt0: Using 256 TX descriptors and 256 RX descriptors
bnxt0: Using 0 RX queues 0 TX queues
bnxt0: Using MSI-X interrupts with 1 vectors
bnxt0: iflib_dma_alloc_align: bus_dma_tag_create failed: 22
bnxt0: Unable to allocate device TX queue
bnxt0: Unable to allocate queue memory
device_attach: bnxt0 attach returned 22
pcib10: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib10: could not evaluate _ADR - AE_NOT_FOUND
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib11: could not evaluate _ADR - AE_NOT_FOUND
pci11: <ACPI PCI bus> numa-domain 0 on pcib11
pcib12: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib12: could not evaluate _ADR - AE_NOT_FOUND
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pci12: <dasp, performance counters> at device 12.0 (no driver attached)
pci12: <dasp, performance counters> at device 13.0 (no driver attached)
pci12: <dasp, performance counters> at device 14.0 (no driver attached)
pci12: <dasp, performance counters> at device 15.0 (no driver attached)
pci12: <dasp, performance counters> at device 26.0 (no driver attached)
pci12: <dasp, performance counters> at device 27.0 (no driver attached)
pci12: <dasp, performance counters> at device 28.0 (no driver attached)
pci12: <dasp, performance counters> at device 29.0 (no driver attached)
pcib13: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib13: could not evaluate _ADR - AE_NOT_FOUND
pci13: <ACPI PCI bus> numa-domain 0 on pcib13
pcib14: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib14: could not evaluate _ADR - AE_NOT_FOUND
pci14: <ACPI PCI bus> numa-domain 1 on pcib14
pci14: <unknown> at device 2.4 (no driver attached)
pcib15: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib15: could not evaluate _ADR - AE_NOT_FOUND
pci15: <ACPI PCI bus> numa-domain 1 on pcib15
pcib16: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib16: could not evaluate _ADR - AE_NOT_FOUND
pci16: <ACPI PCI bus> numa-domain 1 on pcib16
pcib17: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib17: could not evaluate _ADR - AE_NOT_FOUND
pci17: <ACPI PCI bus> numa-domain 1 on pcib17
pcib18: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib18: could not evaluate _ADR - AE_NOT_FOUND
pci18: <ACPI PCI bus> numa-domain 1 on pcib18
pcib19: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib19: could not evaluate _ADR - AE_NOT_FOUND
pci19: <ACPI PCI bus> numa-domain 1 on pcib19
pci19: <dasp, performance counters> at device 12.0 (no driver attached)
pci19: <dasp, performance counters> at device 13.0 (no driver attached)
pci19: <dasp, performance counters> at device 14.0 (no driver attached)
pci19: <dasp, performance counters> at device 15.0 (no driver attached)
pci19: <dasp, performance counters> at device 26.0 (no driver attached)
pci19: <dasp, performance counters> at device 27.0 (no driver attached)
pci19: <dasp, performance counters> at device 28.0 (no driver attached)
pci19: <dasp, performance counters> at device 29.0 (no driver attached)
pcib20: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib20: could not evaluate _ADR - AE_NOT_FOUND
pci20: <ACPI PCI bus> numa-domain 1 on pcib20
apei0: <ACPI Platform Error Interface> on acpi0
cpu0: <ACPI CPU> numa-domain 0 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
ipmi0: <IPMI System Interface> port 0xca8,0xcac irq 10 on acpi0
ipmi0: KCS mode found at io 0xca8 on acpi
ichwd0: <Lewisburg watchdog timer> at port 0x400-0x41f iomem 0xfdc6000c-0xfdc6000f on isa0
orm0: <ISA Option ROM> at iomem 0xed800-0xf17ff pnpid ORM0000 on isa0
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est7 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est8 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est9 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est10 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est11 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est12 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est13 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est14 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est15 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est16 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est17 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est18 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est19 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est20 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est21 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est22 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est23 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est24 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est25 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est26 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est27 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est28 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est29 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est30 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est31 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est32 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est33 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est34 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est35 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est36 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est37 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est38 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est39 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est40 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est41 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est42 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est43 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est44 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est45 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est46 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d8500001b00
device_attach: est47 attach returned 6
Timecounter "TSC" frequency 2095077550 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 numa-domain 0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ipmi0: IPMI device rev. 1, firmware rev. 7.00, version 2.0, device support mask 0xdf
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0017> enclosureHandle<0x0002> slot 8
mpr0: At enclosure level 1 and connector name (C1 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0020> enclosureHandle<0x0002> slot 9
mpr0: At enclosure level 1 and connector name (C1 )
ipmi0: Number of channels 2
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0021> enclosureHandle<0x0002> slot 10
mpr0: At enclosure level 1 and connector name (C1 )
ipmi0: Attached watchdog
ipmi0: Establishing power cycle handler
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0022> enclosureHandle<0x0002> slot 11
mpr0: At enclosure level 1 and connector name (C1 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0018> enclosureHandle<0x0002> slot 0
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x0019> enclosureHandle<0x0002> slot 1
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001a> enclosureHandle<0x0002> slot 2
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001b> enclosureHandle<0x0002> slot 3
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001c> enclosureHandle<0x0002> slot 4
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001d> enclosureHandle<0x0002> slot 5
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001e> enclosureHandle<0x0002> slot 6
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x001f> enclosureHandle<0x0002> slot 7
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <5c01<SspTarg,Direct,LsiDev,SepDev>,End Device> <3.0Gbps> handle<0x0012> enclosureHandle<0x0002> slot 12
mpr0: At enclosure level 1 and connector name (C0 )
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%desc)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%driver)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%location)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%pnpinfo)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%parent)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%domain)!
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6610000-0xa661ffff,0xa6500000-0xa65fffff,0xa6622000-0xa6623fff at device 0.0 numa-domain 0 on pci9
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.driver_version)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_qs_enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.disable_msix)!
ahcich10: stopping AHCI engine failed
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.rx_budget)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.tx_abdicate)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.core_offset)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.separate_txrx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.use_logical_cores)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxds)!
bnxt0: PCI BAR0 mapping failure
bnxt0: IFDI_ATTACH_PRE failed 6
device_attach: bnxt0 attach returned 6
pci0:49:0:0: Device leaked memory resources
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%desc)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%driver)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%location)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%pnpinfo)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%parent)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%domain)!
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6600000-0xa660ffff,0xa6400000-0xa64fffff,0xa6620000-0xa6621fff at device 0.1 numa-domain 0 on pci9
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.driver_version)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_qs_enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.disable_msix)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.rx_budget)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.tx_abdicate)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.core_offset)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.separate_txrx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.use_logical_cores)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxds)!
bnxt0: PCI BAR0 mapping failure
bnxt0: IFDI_ATTACH_PRE failed 6
device_attach: bnxt0 attach returned 6
pci0:49:0:1: Device leaked memory resources
ahcich12: stopping AHCI engine failed
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%desc)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%driver)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%location)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%pnpinfo)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%parent)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.%domain)!
bnxt0: <Broadcom BCM57414 NetXtreme-E 10Gb/25Gb Ethernet> mem 0xa6610000-0xa661ffff,0xa6500000-0xa65fffff,0xa6622000-0xa6623fff at device 0.0 numa-domain 0 on pci9
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.driver_version)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxqs)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_qs_enable)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.disable_msix)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.rx_budget)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.tx_abdicate)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.core_offset)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.separate_txrx)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.use_logical_cores)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_ntxds)!
sysctl_warn_reuse: can't re-use a leaf (dev.bnxt.0.iflib.override_nrxds)!
Fatal trap 9: general protection fault while in kernel mode
cpuid = 47; apic id = 57
instruction pointer = 0x20:0xffffffff80b645c0
stack pointer = 0x28:0xffffffff832d4cd0
frame pointer = 0x28:0xffffffff832d4d10
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 9
panic: general protection fault
cpuid = 47
time = 2
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff832d4af0
vpanic() at vpanic+0x17f/frame 0xffffffff832d4b40
panic() at panic+0x43/frame 0xffffffff832d4ba0
trap_fatal() at trap_fatal+0x385/frame 0xffffffff832d4c00
calltrap() at calltrap+0x8/frame 0xffffffff832d4c00
--- trap 0x9, rip = 0xffffffff80b645c0, rsp = 0xffffffff832d4cd0, rbp = 0xffffffff832d4d10 ---
taskqgroup_attach() at taskqgroup_attach+0x130/frame 0xffffffff832d4d10
bnxt_attach_pre() at bnxt_attach_pre+0x748/frame 0xffffffff832d4d80
iflib_device_register() at iflib_device_register+0x155/frame 0xffffffff832d4e10
iflib_device_attach() at iflib_device_attach+0xb5/frame 0xffffffff832d4e40
device_attach() at device_attach+0x3c3/frame 0xffffffff832d4e90
device_probe_and_attach() at device_probe_and_attach+0x41/frame 0xffffffff832d4ec0
pci_driver_added() at pci_driver_added+0xf3/frame 0xffffffff832d4f00
devclass_driver_added() at devclass_driver_added+0x39/frame 0xffffffff832d4f40
devclass_add_driver() at devclass_add_driver+0x13d/frame 0xffffffff832d4f80
_linux_pci_register_driver() at _linux_pci_register_driver+0xe6/frame 0xffffffff832d4fb0
init() at init+0x12/frame 0xffffffff832d4fd0
mi_startup() at mi_startup+0xdf/frame 0xffffffff832d4ff0
btext() at btext+0x22
KDB: enter: panic
[ thread pid 0 tid 100000 ]
Stopped at kdb_enter+0x37: movq $0,0x141d7fe(%rip)
db>