error 19 when booting from USB

Status
Not open for further replies.

cinquento

Cadet
Joined
Dec 30, 2015
Messages
2
I put together a little system to run as a fileserver/media player, here are the specs:

Intel Core i3 6100 Boxed
ASUS B150M-C
G.Skill Ripjaws IV 8GB DDR4-2133 CL15 kit
Crucial BX100 120GB
Seagate Desktop HDD 4TB x2

The problem is that when i try to boot from USB (usb 2.0 key in a 2.0 slot), I get this error:
Mounting from ufs:/dev/ufs/FreeNASs1a failed with error 19

I googled around a little bit and found out that this error is quite common. The most common solution for this problem seems to be to insert these lines in the loader prompt:

set debug.acpi.disabled="hostres"
boot

I did this but the problem still remains.

Could someone please advise me what to do next?

I must warn you that i'm completely new to freenas and working with comman lines.

Thanks!
 

Fuganater

Patron
Joined
Sep 28, 2015
Messages
477
You are not using anywhere near recommended hardware so it probably isn't supported.
 

cinquento

Cadet
Joined
Dec 30, 2015
Messages
2
ah that's too bad... so any of the freebsd variations probably won't work? or is it just freenas?
 

cyberjock

Inactive Account
Joined
Mar 25, 2012
Messages
19,525
That motherboard really isn't designed to run FreeNAS. While I have no recommendations on how to help, I don't know that you can fix this without getting hardware that is more appropriate for FreeNAS. :(
 
Status
Not open for further replies.
Top