Sadly, this fix does not appear to work. I lost a drive today with NCQ disabled.
Code:# camcontrol tag da6 -v (pass6:mpr0:0:6:0): dev_openings 1 (pass6:mpr0:0:6:0): dev_active 0 (pass6:mpr0:0:6:0): allocated 0 (pass6:mpr0:0:6:0): queued 0 (pass6:mpr0:0:6:0): held 0 (pass6:mpr0:0:6:0): mintags 2 (pass6:mpr0:0:6:0): maxtags 255 Aug 1 03:18:40 vault (da6:mpr0:0:6:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 length 0 SMID 975 Aborting command 0xfffffe00010a6990 Aug 1 03:18:40 vault mpr0: Sending reset from mprsas_send_abort for target ID 6 Aug 1 03:18:40 vault mpr0: Unfreezing devq for target ID 6 Aug 1 03:18:40 vault (da6:mpr0:0:6:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 Aug 1 03:18:40 vault (da6:mpr0:0:6:0): CAM status: Command timeout Aug 1 03:18:40 vault (da6:mpr0:0:6:0): Retrying command Aug 1 03:18:40 vault (da6:mpr0:0:6:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 Aug 1 03:18:40 vault (da6:mpr0:0:6:0): CAM status: SCSI Status Error Aug 1 03:18:40 vault (da6:mpr0:0:6:0): SCSI status: Check Condition Aug 1 03:18:40 vault (da6:mpr0:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Aug 1 03:18:40 vault (da6:mpr0:0:6:0): Error 6, Retries exhausted Aug 1 03:18:40 vault (da6:mpr0:0:6:0): Invalidating pack Aug 1 03:18:40 vault ZFS: vdev state changed, pool_guid=8222513563341353211 vdev_guid=2829914938609022262 Aug 1 03:18:40 vault ZFS: vdev state changed, pool_guid=8222513563341353211 vdev_guid=2829914938609022262
That is too bad! I have been absolutely error free since making the change. And I sometimes had them crap out in groups. I have done nothing except make sure they never sleep and disabling NCQ... Apparently the seagate saga continues...
Code:
(da13:mpr0:0:4:0): CAM status: Command timeout (da13:mpr0:0:4:0): READ(10). CDB: 28 00 63 c4 26 d8 00 00 30 00 length 24576 SMID 281 terminated ioc 804b scsi 0 state c xfer(da13: 0 mpr0:0: (da13:mpr0:0:4:0): WRITE(16). CDB: 8a 00 00 00 00 02 01 4d 23 e0 00 00 00 58 00 00 length 45056 SMID 325 terminated ioc 804b 4:scsi 0 state c xfer 0 0): mpr0: Retrying command Unfreezing devq for target ID 4 (da13:mpr0:0:4:0): READ(10). CDB: 28 00 63 c4 25 f8 00 00 28 00 (da13:mpr0:0:4:0): CAM status: CCB request completed with an error (da13:mpr0:0:4:0): Retrying command (da13:mpr0:0:4:0): READ(10). CDB: 28 00 63 c4 26 d8 00 00 30 00 (da13:mpr0:0:4:0): CAM status: CCB request completed with an error (da13:mpr0:0:4:0): Retrying command (da13:mpr0:0:4:0): WRITE(16). CDB: 8a 00 00 00 00 02 01 4d 23 e0 00 00 00 58 00 00 (da13:mpr0:0:4:0): CAM status: CCB request completed with an error (da13:mpr0:0:4:0): Retrying command (da13:mpr0:0:4:0): READ(10). CDB: 28 00 63 c4 26 28 00 00 80 00 (da13:mpr0:0:4:0): CAM status: SCSI Status Error (da13:mpr0:0:4:0): SCSI status: Check Condition (da13:mpr0:0:4:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da13:mpr0:0:4:0): Retrying command (per sense data) nfsd: can't register svc name (noperiph:mpr0:0:4294967295:0): SMID 2 Aborting command 0xfffffe0000af6040 mpr0: Sending reset from mprsas_send_abort for target ID 7 (da16:mpr0:0:7:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 length 0 SMID 709 terminated ioc 804b scsi 0 state c xfer 0 (da16:mpr0:0:7:0): READ(10). CDB: 28 00 64 d9 9f 98 00 00 88 00 length 69632 SMID 684 terminated ioc 804b scsi 0 state c xfer(da16:mpr0:0:7:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 0 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 14 e4 b8 b0 00 00 00 30 00 00 length 24576 SMID 192 terminated ioc 804b s(da16:csi 0 state c xfer 0 mpr0:0: (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 02 90 9d ca c8 00 00 00 e0 00 00 length 114688 SMID 431 terminated ioc 804b 7:scsi 0 state c xfer 0 0): mpr0: Retrying command Unfreezing devq for target ID 7 (da16:mpr0:0:7:0): READ(10). CDB: 28 00 64 d9 9f 98 00 00 88 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 14 e4 b8 b0 00 00 00 30 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 02 90 9d cb a8 00 00 00 b0 00 00 (da16:mpr0:0:7:0): CAM status: Command timeout (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 02 90 9d ca c8 00 00 00 e0 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(10). CDB: 28 00 64 d9 9f 98 00 00 88 00 (da16:mpr0:0:7:0): CAM status: SCSI Status Error (da16:mpr0:0:7:0): SCSI status: Check Condition (da16:mpr0:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da16:mpr0:0:7:0): Retrying command (per sense data) (da16:mpr0:0:7:0): WRITE(16). CDB: 8a 00 00 00 00 02 03 25 2d 50 00 00 00 e0 00 00 length 114688 SMID 271 terminated ioc 804b scsi 0 state c xfer 114688 (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 14 e4 f3 40 00 00 00 e8 00 00 length 118784 SMID 544 terminated ioc 804b (da16:mpr0:0:7:0): WRITE(16). CDB: 8a 00 00 00 00 02 03 25 2d 50 00 00 00 e0 00 00 scsi 0 state c xfer 0 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 14 e4 f4 28 00 00 00 b0 00 00 length 90112 SMID 325 terminated ioc 804b s(da16:csi 0 state c xfer 0 mpr0:0: (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 14 e4 f2 30 00 00 00 e0 00 00 length 114688 SMID 980 terminated ioc 804b 7:scsi 0 state c xfer 0 0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 14 e4 f3 40 00 00 00 e8 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 14 e4 f4 28 00 00 00 b0 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 14 e4 f2 30 00 00 00 e0 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 14 e4 f2 30 00 00 00 e0 00 00 (da16:mpr0:0:7:0): CAM status: SCSI Status Error (da16:mpr0:0:7:0): SCSI status: Check Condition (da16:mpr0:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da16:mpr0:0:7:0): Retrying command (per sense data) (da16:mpr0:0:7:0): WRITE(16). CDB: 8a 00 00 00 00 06 5d df fd b8 00 00 00 08 00 00 length 4096 SMID 882 terminated ioc 804b scsi 0 state c xfer 0 (da16:mpr0:0:7:0): WRITE(16). CDB: 8a 00 00 00 00 06 5d df fb b8 00 00 00 08 00 00 length 4096 SMID 875 terminated ioc 804b s(da16:mpr0:0:7:0): WRITE(16). CDB: 8a 00 00 00 00 06 5d df fd b8 00 00 00 08 00 00 csi 0 state c xfer 0 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): WRITE(6). CDB: 0a 00 03 b8 08 00 length 4096 SMID 488 terminated ioc 804b scsi 0 state c xfer 0 (da16:mpr0:0: (da16:mpr0:0:7:0): WRITE(6). CDB: 0a 00 01 b8 08 00 length 4096 SMID 994 terminated ioc 804b scsi 0 state c xfer 0 7:0): (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 01 1a af 61 68 00 00 00 b0 00 00 length 90112 SMID 548 terminated ioc 804b sRetrying command csi 0 state c xfer 0 (da16:mpr0:0:7:0): WRITE(16). CDB: 8a 00 00 00 00 06 5d df fb b8 00 00 00 08 00 00 (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 01 1a af 60 88 00 00 00 b0 00 00 length 90112 SMID 909 terminated ioc 804b s(da16:mpr0:0:7:0): CAM status: CCB request completed with an error csi 0 state c xfer 0 (da16:mpr0:0: (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 01 1a af 62 48 00 00 00 30 00 00 length 24576 SMID 707 terminated ioc 804b s7:0): csi 0 state c xfer 0 Retrying command (da16:mpr0:0:7:0): WRITE(6). CDB: 0a 00 03 b8 08 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): WRITE(6). CDB: 0a 00 01 b8 08 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 01 1a af 61 68 00 00 00 b0 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 01 1a af 60 88 00 00 00 b0 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 01 1a af 62 48 00 00 00 30 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(10). CDB: 28 00 59 ad 3d a0 00 00 28 00 (da16:mpr0:0:7:0): CAM status: SCSI Status Error (da16:mpr0:0:7:0): SCSI status: Check Condition (da16:mpr0:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da16:mpr0:0:7:0): Retrying command (per sense data) (da16:mpr0:0:7:0): READ(10). CDB: 28 00 60 d6 c6 38 00 00 20 00 length 16384 SMID 397 terminated ioc 804b scsi 0 state c xfer 0 (da16:mpr0:0:7:0): READ(10). CDB: 28 00 60 d0 0d a8 00 00 b0 00 length 90112 SMID 215 terminated ioc 804b scsi 0 state c xfer(da16:mpr0:0:7:0): READ(10). CDB: 28 00 60 d6 c6 38 00 00 20 00 0 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): READ(10). CDB: 28 00 60 c7 5e c0 00 00 20 00 length 16384 SMID 898 terminated ioc 804b scsi 0 state c xfer(da16: 0 mpr0:0: (da16:mpr0:0:7:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 length 0 SMID 191 terminated ioc 804b scsi 0 sta7:te c xfer 0 0): (da16:mpr0:0:7:0): READ(10). CDB: 28 00 59 ad 5a 00 00 00 28 00 length 20480 SMID 969 terminated ioc 804b scsi 0 state c xferRetrying command 0 (da16:mpr0:0:7:0): READ(10). CDB: 28 00 60 d0 0d a8 00 00 b0 00 (da16:mpr0:0:7:0): READ(10). CDB: 28 00 59 ad 3d a0 00 00 28 00 length 20480 SMID 841 terminated ioc 804b scsi 0 state c xfer(da16:mpr0:0:7:0): CAM status: CCB request completed with an error 0 (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(10). CDB: 28 00 60 c7 5e c0 00 00 20 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(10). CDB: 28 00 59 ad 5a 00 00 00 28 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(10). CDB: 28 00 59 ad 3d a0 00 00 28 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(10). CDB: 28 00 59 ad 5a 00 00 00 28 00 (da16:mpr0:0:7:0): CAM status: SCSI Status Error (da16:mpr0:0:7:0): SCSI status: Check Condition (da16:mpr0:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da16:mpr0:0:7:0): Retrying command (per sense data) (noperiph:mpr0:0:4294967295:0): SMID 3 Aborting command 0xfffffe0000b0b2e0 mpr0: Sending reset from mprsas_send_abort for target ID 1 (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 02 c5 df 0d 28 00 00 00 28 00 00 length 20480 SMID 582 terminated ioc 804b scsi 0 state c xfer 0 (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 02 02 a8 75 20 00 00 00 48 00 00 length 36864 SMID 824 terminated ioc 804b s(da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 02 c5 df 0d 28 00 00 00 28 00 00 csi 0 state c xfer 0 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): WRITE(16). CDB: 8a 00 00 00 00 02 04 11 ec 18 00 00 00 e0 00 00 length 114688 SMID 778 terminated ioc 804b(da10: scsi 0 state c xfer 0 mpr0:0:mpr0: 1:Unfreezing devq for target ID 1 0): Retrying command (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 02 02 a8 eb a0 00 00 00 b0 00 00 (da10:mpr0:0:1:0): CAM status: Command timeout (da10:mpr0:0:1:0): Retrying command (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 02 02 a8 75 20 00 00 00 48 00 00 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): Retrying command (da10:mpr0:0:1:0): WRITE(16). CDB: 8a 00 00 00 00 02 04 11 ec 18 00 00 00 e0 00 00 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): Retrying command (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 02 02 a8 eb a0 00 00 00 b0 00 00 (da10:mpr0:0:1:0): CAM status: SCSI Status Error (da10:mpr0:0:1:0): SCSI status: Check Condition (da10:mpr0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da10:mpr0:0:1:0): Retrying command (per sense data) (da10:mpr0:0:1:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 length 0 SMID 341 terminated ioc 804b scsi 0 state c xfer 0 (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 f9 67 20 00 00 00 30 00 00 length 24576 SMID 674 terminated ioc 804b s(da10:mpr0:0:1:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 csi 0 state c xfer 0 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 f9 29 60 00 00 00 b0 00 00 length 90112 SMID 372 terminated ioc 804b s(da10:csi 0 state c xfer 0 mpr0:0: (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 f9 28 80 00 00 00 b0 00 00 length 90112 SMID 483 terminated ioc 804b s1:csi 0 state c xfer 0 0): Retrying command (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 f9 67 20 00 00 00 30 00 00 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): Retrying command (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 f9 29 60 00 00 00 b0 00 00 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): Retrying command (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 f9 28 80 00 00 00 b0 00 00 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): Retrying command (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 f9 28 80 00 00 00 b0 00 00 (da10:mpr0:0:1:0): CAM status: SCSI Status Error (da10:mpr0:0:1:0): SCSI status: Check Condition (da10:mpr0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da10:mpr0:0:1:0): Retrying command (per sense data) (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 02 c5 e2 3c 98 00 00 00 28 00 00 length 20480 SMID 242 terminated ioc 804b scsi 0 state c xfer 0 (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 fa 8b b0 00 00 00 e0 00 00 length 114688 SMID 180 terminated ioc 804b (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 02 c5 e2 3c 98 00 00 00 28 00 00 scsi 0 state c xfer 0 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): WRITE(16). CDB: 8a 00 00 00 00 02 00 06 3a c0 00 00 00 10 00 00 length 8192 SMID 628 terminated ioc 804b s(da10:csi 0 state c xfer 0 mpr0:0: (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 fa 8b 00 00 00 00 58 00 00 length 45056 SMID 255 terminated ioc 804b s1:csi 0 state c xfer 0 0): (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 fa 89 e0 00 00 00 b0 00 00 length 90112 SMID 604 terminated ioc 804b sRetrying command csi 0 state c xfer 0 (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 fa 8b b0 00 00 00 e0 00 00 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): Retrying command (da10:mpr0:0:1:0): WRITE(16). CDB: 8a 00 00 00 00 02 00 06 3a c0 00 00 00 10 00 00 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): Retrying command (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 fa 8b 00 00 00 00 58 00 00 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): Retrying command (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 fa 89 e0 00 00 00 b0 00 00 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): Retrying command (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 fa 89 e0 00 00 00 b0 00 00 (da10:mpr0:0:1:0): CAM status: SCSI Status Error (da10:mpr0:0:1:0): SCSI status: Check Condition (da10:mpr0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da10:mpr0:0:1:0): Retrying command (per sense data) (da10:mpr0:0:1:0): READ(10). CDB: 28 00 6c 9e a5 f0 00 00 b0 00 length 90112 SMID 305 terminated ioc 804b scsi 0 state c xfer 0 (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 fd 6f 30 00 00 00 30 00 00 length 24576 SMID 748 terminated ioc 804b s(da10:mpr0:0:1:0): READ(10). CDB: 28 00 6c 9e a5 f0 00 00 b0 00 csi 0 state c xfer 0 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 fc 52 70 00 00 00 b0 00 00 length 90112 SMID 207 terminated ioc 804b s(da10:csi 0 state c xfer 0 mpr0:0: (da10:mpr0:0:1:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 length 0 SMID 689 terminated ioc 804b scsi 0 sta1:te c xfer 0 0): Retrying command (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 fd 6f 30 00 00 00 30 00 00 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): Retrying command (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 fc 52 70 00 00 00 b0 00 00 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): Retrying command (da10:mpr0:0:1:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 (da10:mpr0:0:1:0): CAM status: CCB request completed with an error (da10:mpr0:0:1:0): Retrying command (da10:mpr0:0:1:0): READ(16). CDB: 88 00 00 00 00 03 20 fc 52 70 00 00 00 b0 00 00 (da10:mpr0:0:1:0): CAM status: SCSI Status Error (da10:mpr0:0:1:0): SCSI status: Check Condition (da10:mpr0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da10:mpr0:0:1:0): Retrying command (per sense data) (noperiph:mpr0:0:4294967295:0): SMID 4 Aborting command 0xfffffe0000ad3f90 mpr0: Sending reset from mprsas_send_abort for target ID 4 (da13:mpr0:0:4:0): READ(16). CDB: 88 00 00 00 00 01 11 c0 20 a8 00 00 00 30 00 00 length 24576 SMID 792 terminated ioc 804b s(da13:mpr0:0:4:0): READ(16). CDB: 88 00 00 00 00 01 11 c0 20 50 00 00 00 28 00 00 csi 0 state c xfer 0 (da13:mpr0:0:4:0): CAM status: Command timeout (da13:mpr0:0:4:0): READ(16). CDB: 88 00 00 00 00 01 11 c1 68 90 00 00 00 28 00 00 length 20480 SMID 927 terminated ioc 804b s(da13:csi 0 state c xfer 0 mpr0:0: (da13:mpr0:0:4:0): WRITE(16). CDB: 8a 00 00 00 00 02 04 95 8a 48 00 00 00 e0 00 00 length 114688 SMID 289 terminated ioc 804b4: scsi 0 state c xfer 0 0): mpr0: Retrying command Unfreezing devq for target ID 4 (da13:mpr0:0:4:0): READ(16). CDB: 88 00 00 00 00 01 11 c0 20 a8 00 00 00 30 00 00 (da13:mpr0:0:4:0): CAM status: CCB request completed with an error (da13:mpr0:0:4:0): Retrying command (da13:mpr0:0:4:0): READ(16). CDB: 88 00 00 00 00 01 11 c1 68 90 00 00 00 28 00 00 (da13:mpr0:0:4:0): CAM status: CCB request completed with an error (da13:mpr0:0:4:0): Retrying command (da13:mpr0:0:4:0): WRITE(16). CDB: 8a 00 00 00 00 02 04 95 8a 48 00 00 00 e0 00 00 (da13:mpr0:0:4:0): CAM status: CCB request completed with an error (da13:mpr0:0:4:0): Retrying command (da13:mpr0:0:4:0): READ(16). CDB: 88 00 00 00 00 01 11 c0 20 a8 00 00 00 30 00 00 (da13:mpr0:0:4:0): CAM status: SCSI Status Error (da13:mpr0:0:4:0): SCSI status: Check Condition (da13:mpr0:0:4:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da13:mpr0:0:4:0): Retrying command (per sense data) (da13:mpr0:0:4:0): READ(10). CDB: 28 00 6f 37 bc a0 00 00 28 00 length 20480 SMID 309 terminated ioc 804b scsi 0 state c xfer 0 (da13:mpr0:0:4:0): READ(10). CDB: 28 00 6f 37 bc 18 00 00 30 00 length 24576 SMID 694 terminated ioc 804b scsi 0 state c xfer(da13:mpr0:0:4:0): READ(10). CDB: 28 00 6f 37 bc a0 00 00 28 00 0 (da13:mpr0:0:4:0): CAM status: CCB request completed with an error (da13:mpr0:0:4:0): READ(10). CDB: 28 00 6f 37 bc 48 00 00 28 00 length 20480 SMID 337 terminated ioc 804b scsi 0 state c xfer(da13: 0 mpr0:0: (da13:mpr0:0:4:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 length 0 SMID 131 terminated ioc 804b scsi 0 sta4:te c xfer 0 0): Retrying command (da13:mpr0:0:4:0): READ(10). CDB: 28 00 6f 37 bc 18 00 00 30 00 (da13:mpr0:0:4:0): CAM status: CCB request completed with an error (da13:mpr0:0:4:0): Retrying command (da13:mpr0:0:4:0): READ(10). CDB: 28 00 6f 37 bc 48 00 00 28 00 (da13:mpr0:0:4:0): CAM status: CCB request completed with an error (da13:mpr0:0:4:0): Retrying command (da13:mpr0:0:4:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 (da13:mpr0:0:4:0): CAM status: CCB request completed with an error (da13:mpr0:0:4:0): Retrying command (da13:mpr0:0:4:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 (da13:mpr0:0:4:0): CAM status: SCSI Status Error (da13:mpr0:0:4:0): SCSI status: Check Condition (da13:mpr0:0:4:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da13:mpr0:0:4:0): Error 6, Retries exhausted (da13:mpr0:0:4:0): Invalidating pack mpr0: mpr_user_pass_thru: user reply buffer (64) smaller than returned buffer (68) mpr0: mpr_user_pass_thru: user reply buffer (64) smaller than returned buffer (68) (noperiph:mpr0:0:4294967295:0): SMID 5 Aborting command 0xfffffe0000af0ee0 mpr0: Sending reset from mprsas_send_abort for target ID 7 (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 26 3c d8 08 00 00 00 28 00 00 length 20480 SMID 483 terminated ioc 804b scsi 0 state c xfer 0 (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 26 3c d7 d8 00 00 00 30 00 00 length 24576 SMID 277 terminated ioc 804b s(da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 26 3c d8 08 00 00 00 28 00 00 csi 0 state c xfer 0 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 26 3c d7 b0 00 00 00 28 00 00 length 20480 SMID 692 terminated ioc 804b s(da16:csi 0 state c xfer 0 mpr0:0:mpr0: 7:Unfreezing devq for target ID 7 0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 26 3c d7 d8 00 00 00 30 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 26 3c d7 b0 00 00 00 28 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 (da16:mpr0:0:7:0): CAM status: Command timeout (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 03 26 3c d7 b0 00 00 00 28 00 00 (da16:mpr0:0:7:0): CAM status: SCSI Status Error (da16:mpr0:0:7:0): SCSI status: Check Condition (da16:mpr0:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da16:mpr0:0:7:0): Retrying command (per sense data) (da16:mpr0:0:7:0): READ(10). CDB: 28 00 6d a4 8a a0 00 00 30 00 length 24576 SMID 281 terminated ioc 804b scsi 0 state c xfer 0 (da16:mpr0:0:7:0): READ(10). CDB: 28 00 6d a4 8a 70 00 00 30 00 length 24576 SMID 155 terminated ioc 804b scsi 0 state c xfer(da16:mpr0:0:7:0): READ(10). CDB: 28 00 6d a4 8a a0 00 00 30 00 0 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 01 08 9a 70 60 00 00 00 28 00 00 length 20480 SMID 380 terminated ioc 804b s(da16:csi 0 state c xfer 0 mpr0:0: (da16:mpr0:0:7:0): WRITE(16). CDB: 8a 00 00 00 00 02 08 96 9b 10 00 00 00 e0 00 00 length 114688 SMID 527 terminated ioc 804b7: scsi 0 state c xfer 0 0): Retrying command (da16:mpr0:0:7:0): READ(10). CDB: 28 00 6d a4 8a 70 00 00 30 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 01 08 9a 70 60 00 00 00 28 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): WRITE(16). CDB: 8a 00 00 00 00 02 08 96 9b 10 00 00 00 e0 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 01 08 17 d1 48 00 00 00 08 00 00 (da16:mpr0:0:7:0): CAM status: SCSI Status Error (da16:mpr0:0:7:0): SCSI status: Check Condition (da16:mpr0:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da16:mpr0:0:7:0): Retrying command (per sense data) (da16:mpr0:0:7:0): WRITE(16). CDB: 8a 00 00 00 00 02 08 96 9b f0 00 00 00 e8 00 00 length 118784 SMID 378 terminated ioc 804b scsi 0 state c xfer 0 (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 01 08 17 d1 48 00 00 00 08 00 00 length 4096 SMID 455 terminated ioc 804b sc(da16:mpr0:0:7:0): WRITE(16). CDB: 8a 00 00 00 00 02 08 96 9b f0 00 00 00 e8 00 00 si 0 state c xfer 0 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): READ(10). CDB: 28 00 6d a4 8a a0 00 00 30 00 length 24576 SMID 232 terminated ioc 804b scsi 0 state c xfer(da16: 0 mpr0:0: (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 01 08 9a 70 60 00 00 00 28 00 00 length 20480 SMID 352 terminated ioc 804b s7:csi 0 state c xfer 0 0): (da16:mpr0:0:7:0): READ(10). CDB: 28 00 6d a4 8a 70 00 00 30 00 length 24576 SMID 563 terminated ioc 804b scsi 0 state c xferRetrying command 0 (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 01 08 17 d1 48 00 00 00 08 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(10). CDB: 28 00 6d a4 8a a0 00 00 30 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(16). CDB: 88 00 00 00 00 01 08 9a 70 60 00 00 00 28 00 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(10). CDB: 28 00 6d a4 8a 70 00 00 30 00 (da16:mpr0:0:7:0): CAM status: CCB request completed with an error (da16:mpr0:0:7:0): Retrying command (da16:mpr0:0:7:0): READ(10). CDB: 28 00 6d a4 8a 70 00 00 30 00 (da16:mpr0:0:7:0): CAM status: SCSI Status Error (da16:mpr0:0:7:0): SCSI status: Check Condition (da16:mpr0:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da16:mpr0:0:7:0): Retrying command (per sense data)