BigDave
FreeNAS Enthusiast
- Joined
- Oct 6, 2013
- Messages
- 2,479
Received this email that was sent at 3:01am this morning.
I performed a Long Smart Test on drive da0 shortly after reading the email about 5:30am,
here is the result
Log messages
This is the very first error any of my drives has ever had. I'm gonna keep a close eye on this,
but I don't really know how concerned I should be. Everything is backed up so no worries
there. I have two hot swap bays empty so switching the drive to another power and data
connection is only a matter of a shut down/restart.
Case - Mercury S8, CaseLabs
PSU - AURUM S 400 Gold, Fortran (FSP Group)
Motherboard - X9SCM-F, Supermicro
CPU - E3-1220 v2, Intel® Xeon®
Memory - 32GB (8GB x4) DDR3-1600 ECC UDIMM, Crucial
Boot Device - X25-E SSD 32GB SLC, Intel
Hard Drives - Six 3TB WD30EFRX, Western Digital
HBA - M1015 Flashed IT - P20, IBM
NIC - X520-DA1 10Gb, Intel
Vol. Config - Single vDev RAIDz2
FreeNAS-9.10-STABLE-201605021851 (35c85f7)
Code:
freenas.local kernel log messages: > (da0:mps0:0:0:0): WRITE(10). CDB: 2a 00 13 8f a9 78 00 00 68 00 length 53248 SMID 450 terminated ioc 804b scsi 0 state c xfer 0 > (da0:mps0:0:0:0): WRITE(10). CDB: 2a 00 13 8f a9 78 00 00 68 00 > (da0:mps0:0:0:0): CAM status: SCSI Status Error > (da0:mps0:0:0:0): SCSI status: Check Condition > (da0:mps0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) > (da0:mps0:0:0:0): Retrying command (per sense data) > (da0:mps0:0:0:0): WRITE(10). CDB: 2a 00 88 50 ee b0 00 00 08 00 > (da0:mps0:0:0:0): CAM status: SCSI Status Error > (da0:mps0:0:0:0): SCSI status: Check Condition > (da0:mps0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) > (da0:mps0:0:0:0): Retrying command (per sense data) -- End of security output --
I performed a Long Smart Test on drive da0 shortly after reading the email about 5:30am,
here is the result
Code:
login as: root root@192.168.1.13's password: Last login: Fri May 13 05:55:58 2016 from 192.168.1.26 FreeBSD 10.3-RELEASE (FreeNAS.amd64) #0 91d0e8e(freebsd10): Mon May 2 10:32:27 PDT 2016 FreeNAS (c) 2009-2016, The FreeNAS Development Team All rights reserved. FreeNAS is released under the modified BSD license. For more information, documentation, help or support, go here: http://freenas.org Welcome to FreeNAS [root@freenas] ~# smartctl -a /dev/da0 smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.3-RELEASE amd64] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68EUZN0 Serial Number: WD-xxxxxxxxxxxx LU WWN Device Id: 5 0014ee 0ae528ca9 Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri May 13 17:31:26 2016 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (38640) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 388) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 177 177 021 Pre-fail Always - 6108 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 98 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 15893 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 97 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 69 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 28 194 Temperature_Celsius 0x0022 117 107 000 Old_age Always - 33 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 15888 - # 2 Short offline Completed without error 00% 15831 - # 3 Extended offline Completed without error 00% 15694 - # 4 Short offline Completed without error 00% 15592 - # 5 Short offline Completed without error 00% 15520 - # 6 Extended offline Completed without error 00% 15454 - # 7 Short offline Completed without error 00% 15328 - # 8 Short offline Completed without error 00% 15136 - # 9 Extended offline Completed without error 00% 14999 - #10 Short offline Completed without error 00% 14897 - #11 Short offline Completed without error 00% 14801 - #12 Extended offline Completed without error 00% 14711 - #13 Short offline Completed without error 00% 14585 - #14 Short offline Completed without error 00% 14394 - #15 Extended offline Completed without error 00% 14256 - #16 Short offline Completed without error 00% 14155 - #17 Short offline Completed without error 00% 14107 - #18 Extended offline Completed without error 00% 14017 - #19 Short offline Completed without error 00% 13891 - #20 Short offline Completed without error 00% 13699 - #21 Extended offline Completed without error 00% 13561 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. [root@freenas] ~#
Log messages
Code:
[root@freenas] ~# cat /var/log/messages May 9 00:00:00 freenas newsyslog[7234]: logfile turned over due to size>100K May 9 00:00:00 freenas syslog-ng[1574]: Configuration reload request received, reloading configuration; May 10 00:00:00 freenas syslog-ng[1574]: Configuration reload request received, reloading configuration; May 11 00:00:00 freenas syslog-ng[1574]: Configuration reload request received, reloading configuration; May 12 00:00:00 freenas syslog-ng[1574]: Configuration reload request received, reloading configuration; May 12 05:06:27 freenas (da0:mps0:0:0:0): WRITE(10). CDB: 2a 00 13 8f a9 78 00 00 68 00 length 53248 SMID 450 terminated ioc 804b scsi 0 state c xfer 0 May 12 05:06:27 freenas (da0:mps0:0:0:0): WRITE(10). CDB: 2a 00 13 8f a9 78 00 00 68 00 May 12 05:06:27 freenas (da0:mps0:0:0:0): CAM status: SCSI Status Error May 12 05:06:27 freenas (da0:mps0:0:0:0): SCSI status: Check Condition May 12 05:06:27 freenas (da0:mps0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) May 12 05:06:27 freenas (da0:mps0:0:0:0): Retrying command (per sense data) May 12 05:06:32 freenas (da0:mps0:0:0:0): WRITE(10). CDB: 2a 00 88 50 ee b0 00 00 08 00 May 12 05:06:32 freenas (da0:mps0:0:0:0): CAM status: SCSI Status Error May 12 05:06:32 freenas (da0:mps0:0:0:0): SCSI status: Check Condition May 12 05:06:32 freenas (da0:mps0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) May 12 05:06:32 freenas (da0:mps0:0:0:0): Retrying command (per sense data) May 13 00:00:00 freenas syslog-ng[1574]: Configuration reload request received, reloading configuration; [root@freenas] ~#
This is the very first error any of my drives has ever had. I'm gonna keep a close eye on this,
but I don't really know how concerned I should be. Everything is backed up so no worries
there. I have two hot swap bays empty so switching the drive to another power and data
connection is only a matter of a shut down/restart.
Case - Mercury S8, CaseLabs
PSU - AURUM S 400 Gold, Fortran (FSP Group)
Motherboard - X9SCM-F, Supermicro
CPU - E3-1220 v2, Intel® Xeon®
Memory - 32GB (8GB x4) DDR3-1600 ECC UDIMM, Crucial
Boot Device - X25-E SSD 32GB SLC, Intel
Hard Drives - Six 3TB WD30EFRX, Western Digital
HBA - M1015 Flashed IT - P20, IBM
NIC - X520-DA1 10Gb, Intel
Vol. Config - Single vDev RAIDz2
FreeNAS-9.10-STABLE-201605021851 (35c85f7)