This is my first error. Looking for some advise. I received an email today saying "Device: /dev/da0 [SAT], Self-Test Log error count increased from 0 to 1"
The FreeNAS GUI Storage->Status still says "HEALTHY".
Running on a RAIDZ2.
These are the results.
Do I run the test again? Or is the DRIVE TOAST? If its toast, why is FreeNAS still saying "Healthy"?
The FreeNAS GUI Storage->Status still says "HEALTHY".
Running on a RAIDZ2.
These are the results.
Code:
[root@freenas] ~# smartctl -a /dev/da0 smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD40EFRX-68WT0N0 Serial Number: WD-WCC4E3JH4VTC LU WWN Device Id: 5 0014ee 2b6efe9d6 Firmware Version: 82.00A82 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Jan 21 10:33:18 2017 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (54240) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 542) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 3 3 Spin_Up_Time 0x0027 174 174 021 Pre-fail Always - 8258 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 48 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 10771 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 48 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 46 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 152 194 Temperature_Celsius 0x0022 115 107 000 Old_age Always - 37 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 16 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 10764 140972328 # 2 Short offline Completed without error 00% 10681 - # 3 Short offline Completed without error 00% 10585 - # 4 Short offline Completed without error 00% 10489 - # 5 Extended offline Interrupted (host reset) 70% 10431 - # 6 Short offline Completed without error 00% 10389 - # 7 Short offline Completed without error 00% 10216 - # 8 Short offline Completed without error 00% 9983 - # 9 Extended offline Completed without error 00% 9859 - #10 Short offline Completed without error 00% 9750 - #11 Short offline Completed without error 00% 9549 - #12 Short offline Completed without error 00% 9501 - #13 Short offline Completed without error 00% 9406 - #14 Extended offline Completed without error 00% 9313 - #15 Short offline Completed without error 00% 9214 - #16 Short offline Completed without error 00% 9013 - #17 Short offline Completed without error 00% 8834 - #18 Short offline Completed without error 00% 8664 - #19 Extended offline Completed without error 00% 8571 - #20 Short offline Completed without error 00% 8472 - #21 Short offline Completed without error 00% 8376 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Do I run the test again? Or is the DRIVE TOAST? If its toast, why is FreeNAS still saying "Healthy"?