Failed SMART self-check, BACK UP DATA NOW! but no apparent errors logged

Status
Not open for further replies.

ekkzorzizten

Cadet
Joined
May 16, 2015
Messages
3
Hi,

Woke up this morning with an alert from my freenas telling me this:
smartd[2943]: Device: /dev/ada2, FAILED SMART self-check. BACK UP DATA NOW!

Allright, lets check what´s up. SMART results for drive:
Code:
smartctl -a /dev/ada2
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:  Western Digital Red
Device Model:  WDC WD30EFRX-68EUZN0
Serial Number:  WD-xxxxxxxxxxx
LU WWN Device Id: 5 0014ee 6afac892a
Firmware Version: 82.00A82
User Capacity:  3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:  512 bytes logical, 4096 bytes physical
Rotation Rate:  5400 rpm
Device is:  In smartctl database [for details use: -P show]
ATA Version is:  ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:  Mon Nov 28 09:47:57 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
  was never started.
  Auto Offline Data Collection: Disabled.
Self-test execution status:  (  0) The previous self-test routine completed
  without error or no self-test has ever
  been run.
Total time to complete Offline
data collection:  (40320) seconds.
Offline data collection
capabilities:  (0x7b) SMART execute Offline immediate.
  Auto Offline data collection on/off support.
  Suspend Offline collection upon new
  command.
  Offline surface scan supported.
  Self-test supported.
  Conveyance Self-test supported.
  Selective Self-test supported.
SMART capabilities:  (0x0003) Saves SMART data before entering
  power-saving mode.
  Supports SMART auto save timer.
Error logging capability:  (0x01) Error logging supported.
  General Purpose Logging supported.
Short self-test routine
recommended polling time:  (  2) minutes.
Extended self-test routine
recommended polling time:  ( 404) minutes.
Conveyance self-test routine
recommended polling time:  (  5) minutes.
SCT capabilities:  (0x703d) SCT Status supported.
  SCT Error Recovery Control supported.
  SCT Feature Control supported.
  SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAG  VALUE WORST THRESH TYPE  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate  0x002f  200  200  051  Pre-fail  Always  -  0
  3 Spin_Up_Time  0x0027  186  179  021  Pre-fail  Always  -  5691
  4 Start_Stop_Count  0x0032  100  100  000  Old_age  Always  -  328
  5 Reallocated_Sector_Ct  0x0033  200  200  140  Pre-fail  Always  -  0
  7 Seek_Error_Rate  0x002e  200  200  000  Old_age  Always  -  0
  9 Power_On_Hours  0x0032  079  079  000  Old_age  Always  -  15812
10 Spin_Retry_Count  0x0032  100  100  000  Old_age  Always  -  0
11 Calibration_Retry_Count 0x0032  100  253  000  Old_age  Always  -  0
12 Power_Cycle_Count  0x0032  100  100  000  Old_age  Always  -  92
192 Power-Off_Retract_Count 0x0032  200  200  000  Old_age  Always  -  50
193 Load_Cycle_Count  0x0032  200  200  000  Old_age  Always  -  1024
194 Temperature_Celsius  0x0022  119  112  000  Old_age  Always  -  31
196 Reallocated_Event_Count 0x0032  200  200  000  Old_age  Always  -  0
197 Current_Pending_Sector  0x0032  200  200  000  Old_age  Always  -  0
198 Offline_Uncorrectable  0x0030  100  253  000  Old_age  Offline  -  0
199 UDMA_CRC_Error_Count  0x0032  200  200  000  Old_age  Always  -  0
200 Multi_Zone_Error_Rate  0x0008  200  200  000  Old_age  Offline  -  0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description  Status  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline  Completed without error  00%  15811  -
# 2  Short offline  Completed without error  00%  15758  -
# 3  Extended offline  Completed without error  00%  15670  -
# 4  Short offline  Completed without error  00%  15590  -
# 5  Short offline  Completed without error  00%  15422  -
# 6  Extended offline  Interrupted (host reset)  10%  15333  -
# 7  Short offline  Completed without error  00%  15254  -
# 8  Short offline  Completed without error  00%  15192  -
# 9  Short offline  Completed without error  00%  15014  -
#10  Extended offline  Completed without error  00%  14926  -
#11  Short offline  Completed without error  00%  14846  -
#12  Short offline  Completed without error  00%  14679  -
#13  Extended offline  Completed without error  00%  14592  -
#14  Short offline  Completed without error  00%  14512  -
#15  Short offline  Completed without error  00%  14296  -
#16  Extended offline  Completed without error  00%  14209  -
#17  Short offline  Completed without error  00%  14128  -
#18  Short offline  Completed without error  00%  13960  -
#19  Extended offline  Completed without error  00%  13873  -
#20  Short offline  Completed without error  00%  13793  -
#21  Short offline  Completed without error  00%  13553  -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  1  0  0  Not_testing
  2  0  0  Not_testing
  3  0  0  Not_testing
  4  0  0  Not_testing
  5  0  0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


If im getting this right, i dont have any issues with this drive except an interrupted extended offline test, so my question to you are:
Have i interpreted the results correctly or do i have an issue? if i do have a issue, what is it? If i dont, why am i getting this error message?

Setup:
Code:
FreeNAS-9.10.1-U4
4-Disk RAIDZ2 (all western digital RED 3TB NAS drives
Motherboard: asrock c2550d4i
RAM: 2*KINGSTON 8GB PC3L-12800E DDR3-1600 UNBUFFERED ECC MEMORY


Zpool status:
Code:
  pool: freenas-boot
state: ONLINE
  scan: scrub repaired 0 in 0h10m with 0 errors on Sat Nov  5 03:55:12 2016
config:

  NAME  STATE  READ WRITE CKSUM
  freenas-boot  ONLINE  0  0  0
  da0p2  ONLINE  0  0  0

errors: No known data errors

  pool: zfs1
state: ONLINE
  scan: scrub repaired 0 in 11h34m with 0 errors on Tue Nov 15 15:34:56 2016
config:

  NAME  STATE  READ WRITE CKSUM
  zfs1  ONLINE  0  0  0
  raidz2-0  ONLINE  0  0  0
  gptid/e2de0bac-11c9-11e5-9e06-d050995178ee  ONLINE  0  0  0
  gptid/e3597e5c-11c9-11e5-9e06-d050995178ee  ONLINE  0  0  0
  gptid/e3d364fc-11c9-11e5-9e06-d050995178ee  ONLINE  0  0  0
  gptid/e456b184-11c9-11e5-9e06-d050995178ee  ONLINE  0  0  0

zpool status -x: all pools are healthy

Comparing the other disks SMART result and they look like this one, same interrupted extended text error, and about the same smart results but they dont show up in the log.

UPDATE:
Results for all attached disks in the system:
ada0:
Code:
[root] ~# smartctl -a /dev/ada0
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:  Western Digital Red
Device Model:  WDC WD30EFRX-68EUZN0
Serial Number:  WD-xxxxxxxxxx
LU WWN Device Id: 5 0014ee 603df6693
Firmware Version: 80.00A80
User Capacity:  3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:  512 bytes logical, 4096 bytes physical
Rotation Rate:  5400 rpm
Device is:  In smartctl database [for details use: -P show]
ATA Version is:  ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:  Tue Nov 29 09:09:27 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
  was never started.
  Auto Offline Data Collection: Disabled.
Self-test execution status:  (  0) The previous self-test routine completed
  without error or no self-test has ever
  been run.
Total time to complete Offline
data collection:  (40020) seconds.
Offline data collection
capabilities:  (0x7b) SMART execute Offline immediate.
  Auto Offline data collection on/off supp  ort.
  Suspend Offline collection upon new
  command.
  Offline surface scan supported.
  Self-test supported.
  Conveyance Self-test supported.
  Selective Self-test supported.
SMART capabilities:  (0x0003) Saves SMART data before entering
  power-saving mode.
  Supports SMART auto save timer.
Error logging capability:  (0x01) Error logging supported.
  General Purpose Logging supported.
Short self-test routine
recommended polling time:  (  2) minutes.
Extended self-test routine
recommended polling time:  ( 401) minutes.
Conveyance self-test routine
recommended polling time:  (  5) minutes.
SCT capabilities:  (0x703d) SCT Status supported.
  SCT Error Recovery Control supported.
  SCT Feature Control supported.
  SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAG  VALUE WORST THRESH TYPE  UPDATED  WHEN_  FAILED RAW_VALUE
  1 Raw_Read_Error_Rate  0x002f  200  200  051  Pre-fail  Always  -  0
  3 Spin_Up_Time  0x0027  184  176  021  Pre-fail  Always  -  5800
  4 Start_Stop_Count  0x0032  097  097  000  Old_age  Always  -  3024
  5 Reallocated_Sector_Ct  0x0033  200  200  140  Pre-fail  Always  -  0
  7 Seek_Error_Rate  0x002e  200  200  000  Old_age  Always  -  0
  9 Power_On_Hours  0x0032  068  068  000  Old_age  Always  -  23423
 10 Spin_Retry_Count  0x0032  100  100  000  Old_age  Always  -  0
 11 Calibration_Retry_Count 0x0032  100  100  000  Old_age  Always  -  0
 12 Power_Cycle_Count  0x0032  099  099  000  Old_age  Always  -  1976
192 Power-Off_Retract_Count 0x0032  200  200  000  Old_age  Always  -  77
193 Load_Cycle_Count  0x0032  199  199  000  Old_age  Always  -  3113
194 Temperature_Celsius  0x0022  119  112  000  Old_age  Always  -  31
196 Reallocated_Event_Count 0x0032  200  200  000  Old_age  Always  -  0
197 Current_Pending_Sector  0x0032  200  200  000  Old_age  Always  -  0
198 Offline_Uncorrectable  0x0030  100  253  000  Old_age  Offline  -  0
199 UDMA_CRC_Error_Count  0x0032  200  200  000  Old_age  Always  -  0
200 Multi_Zone_Error_Rate  0x0008  200  200  000  Old_age  Offline  -  0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description  Status  Remaining  LifeTime(hours)  LBA  _of_first_error
# 1  Short offline  Completed without error  00%  23345  -
# 2  Extended offline  Completed without error  00%  23258  -
# 3  Short offline  Completed without error  00%  23178  -
# 4  Short offline  Completed without error  00%  23010  -
# 5  Extended offline  Interrupted (host reset)  10%  22921  -
# 6  Short offline  Completed without error  00%  22842  -
# 7  Short offline  Completed without error  00%  22779  -
# 8  Short offline  Completed without error  00%  22601  -
# 9  Extended offline  Completed without error  00%  22514  -
#10  Short offline  Completed without error  00%  22434  -
#11  Short offline  Completed without error  00%  22266  -
#12  Extended offline  Completed without error  00%  22179  -
#13  Short offline  Completed without error  00%  22099  -
#14  Short offline  Completed without error  00%  21883  -
#15  Extended offline  Completed without error  00%  21796  -
#16  Short offline  Completed without error  00%  21715  -
#17  Short offline  Completed without error  00%  21547  -
#18  Extended offline  Completed without error  00%  21460  -
#19  Short offline  Completed without error  00%  21380  -
#20  Short offline  Completed without error  00%  21140  -
#21  Extended offline  Completed without error  00%  21052  -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  1  0  0  Not_testing
  2  0  0  Not_testing
  3  0  0  Not_testing
  4  0  0  Not_testing
  5  0  0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


ada1:
Code:
[root] ~# smartctl -a /dev/ada1
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:  Western Digital Red
Device Model:  WDC WD30EFRX-68AX9N0
Serial Number:  WD-xxxxxxxxxx
LU WWN Device Id: 5 0014ee 25e4dfb04
Firmware Version: 80.00A80
User Capacity:  3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:  512 bytes logical, 4096 bytes physical
Device is:  In smartctl database [for details use: -P show]
ATA Version is:  ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:  Tue Nov 29 09:10:35 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
  was never started.
  Auto Offline Data Collection: Disabled.
Self-test execution status:  (  0) The previous self-test routine completed
  without error or no self-test has ever
  been run.
Total time to complete Offline
data collection:  (39840) seconds.
Offline data collection
capabilities:  (0x7b) SMART execute Offline immediate.
  Auto Offline data collection on/off support.
  Suspend Offline collection upon new
  command.
  Offline surface scan supported.
  Self-test supported.
  Conveyance Self-test supported.
  Selective Self-test supported.
SMART capabilities:  (0x0003) Saves SMART data before entering
  power-saving mode.
  Supports SMART auto save timer.
Error logging capability:  (0x01) Error logging supported.
  General Purpose Logging supported.
Short self-test routine
recommended polling time:  (  2) minutes.
Extended self-test routine
recommended polling time:  ( 399) minutes.
Conveyance self-test routine
recommended polling time:  (  5) minutes.
SCT capabilities:  (0x70bd) SCT Status supported.
  SCT Error Recovery Control supported.
  SCT Feature Control supported.
  SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAG  VALUE WORST THRESH TYPE  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate  0x002f  200  200  051  Pre-fail  Always  -  0
  3 Spin_Up_Time  0x0027  181  174  021  Pre-fail  Always  -  5908
  4 Start_Stop_Count  0x0032  098  098  000  Old_age  Always  -  2979
  5 Reallocated_Sector_Ct  0x0033  200  200  140  Pre-fail  Always  -  0
  7 Seek_Error_Rate  0x002e  200  200  000  Old_age  Always  -  0
  9 Power_On_Hours  0x0032  068  068  000  Old_age  Always  -  23387
 10 Spin_Retry_Count  0x0032  100  100  000  Old_age  Always  -  0
 11 Calibration_Retry_Count 0x0032  100  100  000  Old_age  Always  -  0
 12 Power_Cycle_Count  0x0032  099  099  000  Old_age  Always  -  1948
192 Power-Off_Retract_Count 0x0032  200  200  000  Old_age  Always  -  69
193 Load_Cycle_Count  0x0032  200  200  000  Old_age  Always  -  2909
194 Temperature_Celsius  0x0022  119  113  000  Old_age  Always  -  31
196 Reallocated_Event_Count 0x0032  200  200  000  Old_age  Always  -  0
197 Current_Pending_Sector  0x0032  200  200  000  Old_age  Always  -  0
198 Offline_Uncorrectable  0x0030  100  253  000  Old_age  Offline  -  0
199 UDMA_CRC_Error_Count  0x0032  200  200  000  Old_age  Always  -  0
200 Multi_Zone_Error_Rate  0x0008  200  200  000  Old_age  Offline  -  0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description  Status  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline  Completed without error  00%  23310  -
# 2  Extended offline  Completed without error  00%  23222  -
# 3  Short offline  Completed without error  00%  23141  -
# 4  Short offline  Completed without error  00%  22974  -
# 5  Extended offline  Interrupted (host reset)  10%  22885  -
# 6  Short offline  Completed without error  00%  22806  -
# 7  Short offline  Completed without error  00%  22743  -
# 8  Short offline  Completed without error  00%  22565  -
# 9  Extended offline  Completed without error  00%  22478  -
#10  Short offline  Completed without error  00%  22459  -
#11  Short offline  Completed without error  00%  22397  -
#12  Short offline  Completed without error  00%  22230  -
#13  Extended offline  Completed without error  00%  22143  -
#14  Short offline  Completed without error  00%  22063  -
#15  Short offline  Completed without error  00%  21847  -
#16  Extended offline  Completed without error  00%  21760  -
#17  Short offline  Completed without error  00%  21679  -
#18  Short offline  Completed without error  00%  21511  -
#19  Extended offline  Completed without error  00%  21424  -
#20  Short offline  Completed without error  00%  21343  -
#21  Short offline  Completed without error  00%  21104  -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  1  0  0  Not_testing
  2  0  0  Not_testing
  3  0  0  Not_testing
  4  0  0  Not_testing
  5  0  0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


ada2:
Code:
[root] ~# smartctl -a /dev/ada2
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:  Western Digital Red
Device Model:  WDC WD30EFRX-68EUZN0
Serial Number:  WD-xxxxxxxxxx
LU WWN Device Id: 5 0014ee 6afac892a
Firmware Version: 82.00A82
User Capacity:  3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:  512 bytes logical, 4096 bytes physical
Rotation Rate:  5400 rpm
Device is:  In smartctl database [for details use: -P show]
ATA Version is:  ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:  Tue Nov 29 09:11:43 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
  was never started.
  Auto Offline Data Collection: Disabled.
Self-test execution status:  (  0) The previous self-test routine completed
  without error or no self-test has ever
  been run.
Total time to complete Offline
data collection:  (40320) seconds.
Offline data collection
capabilities:  (0x7b) SMART execute Offline immediate.
  Auto Offline data collection on/off support.
  Suspend Offline collection upon new
  command.
  Offline surface scan supported.
  Self-test supported.
  Conveyance Self-test supported.
  Selective Self-test supported.
SMART capabilities:  (0x0003) Saves SMART data before entering
  power-saving mode.
  Supports SMART auto save timer.
Error logging capability:  (0x01) Error logging supported.
  General Purpose Logging supported.
Short self-test routine
recommended polling time:  (  2) minutes.
Extended self-test routine
recommended polling time:  ( 404) minutes.
Conveyance self-test routine
recommended polling time:  (  5) minutes.
SCT capabilities:  (0x703d) SCT Status supported.
  SCT Error Recovery Control supported.
  SCT Feature Control supported.
  SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAG  VALUE WORST THRESH TYPE  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate  0x002f  200  200  051  Pre-fail  Always  -  0
  3 Spin_Up_Time  0x0027  186  179  021  Pre-fail  Always  -  5691
  4 Start_Stop_Count  0x0032  100  100  000  Old_age  Always  -  328
  5 Reallocated_Sector_Ct  0x0033  200  200  140  Pre-fail  Always  -  0
  7 Seek_Error_Rate  0x002e  200  200  000  Old_age  Always  -  0
  9 Power_On_Hours  0x0032  079  079  000  Old_age  Always  -  15836
 10 Spin_Retry_Count  0x0032  100  100  000  Old_age  Always  -  0
 11 Calibration_Retry_Count 0x0032  100  253  000  Old_age  Always  -  0
 12 Power_Cycle_Count  0x0032  100  100  000  Old_age  Always  -  92
192 Power-Off_Retract_Count 0x0032  200  200  000  Old_age  Always  -  50
193 Load_Cycle_Count  0x0032  200  200  000  Old_age  Always  -  1024
194 Temperature_Celsius  0x0022  119  112  000  Old_age  Always  -  31
196 Reallocated_Event_Count 0x0032  200  200  000  Old_age  Always  -  0
197 Current_Pending_Sector  0x0032  200  200  000  Old_age  Always  -  0
198 Offline_Uncorrectable  0x0030  100  253  000  Old_age  Offline  -  0
199 UDMA_CRC_Error_Count  0x0032  200  200  000  Old_age  Always  -  0
200 Multi_Zone_Error_Rate  0x0008  200  200  000  Old_age  Offline  -  0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description  Status  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline  Completed without error  00%  15811  -
# 2  Short offline  Completed without error  00%  15758  -
# 3  Extended offline  Completed without error  00%  15670  -
# 4  Short offline  Completed without error  00%  15590  -
# 5  Short offline  Completed without error  00%  15422  -
# 6  Extended offline  Interrupted (host reset)  10%  15333  -
# 7  Short offline  Completed without error  00%  15254  -
# 8  Short offline  Completed without error  00%  15192  -
# 9  Short offline  Completed without error  00%  15014  -
#10  Extended offline  Completed without error  00%  14926  -
#11  Short offline  Completed without error  00%  14846  -
#12  Short offline  Completed without error  00%  14679  -
#13  Extended offline  Completed without error  00%  14592  -
#14  Short offline  Completed without error  00%  14512  -
#15  Short offline  Completed without error  00%  14296  -
#16  Extended offline  Completed without error  00%  14209  -
#17  Short offline  Completed without error  00%  14128  -
#18  Short offline  Completed without error  00%  13960  -
#19  Extended offline  Completed without error  00%  13873  -
#20  Short offline  Completed without error  00%  13793  -
#21  Short offline  Completed without error  00%  13553  -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  1  0  0  Not_testing
  2  0  0  Not_testing
  3  0  0  Not_testing
  4  0  0  Not_testing
  5  0  0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


ada3:
Code:
[root] ~# smartctl -a /dev/ada3
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:  Western Digital Red
Device Model:  WDC WD30EFRX-68EUZN0
Serial Number:  WD-xxxxxxxxxx
LU WWN Device Id: 5 0014ee 60501e8f3
Firmware Version: 82.00A82
User Capacity:  3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:  512 bytes logical, 4096 bytes physical
Rotation Rate:  5400 rpm
Device is:  In smartctl database [for details use: -P show]
ATA Version is:  ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:  Tue Nov 29 09:12:13 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
  was never started.
  Auto Offline Data Collection: Disabled.
Self-test execution status:  (  0) The previous self-test routine completed
  without error or no self-test has ever
  been run.
Total time to complete Offline
data collection:  (39540) seconds.
Offline data collection
capabilities:  (0x7b) SMART execute Offline immediate.
  Auto Offline data collection on/off support.
  Suspend Offline collection upon new
  command.
  Offline surface scan supported.
  Self-test supported.
  Conveyance Self-test supported.
  Selective Self-test supported.
SMART capabilities:  (0x0003) Saves SMART data before entering
  power-saving mode.
  Supports SMART auto save timer.
Error logging capability:  (0x01) Error logging supported.
  General Purpose Logging supported.
Short self-test routine
recommended polling time:  (  2) minutes.
Extended self-test routine
recommended polling time:  ( 397) minutes.
Conveyance self-test routine
recommended polling time:  (  5) minutes.
SCT capabilities:  (0x703d) SCT Status supported.
  SCT Error Recovery Control supported.
  SCT Feature Control supported.
  SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAG  VALUE WORST THRESH TYPE  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate  0x002f  200  200  051  Pre-fail  Always  -  0
  3 Spin_Up_Time  0x0027  183  176  021  Pre-fail  Always  -  5833
  4 Start_Stop_Count  0x0032  100  100  000  Old_age  Always  -  317
  5 Reallocated_Sector_Ct  0x0033  200  200  140  Pre-fail  Always  -  0
  7 Seek_Error_Rate  0x002e  200  200  000  Old_age  Always  -  0
  9 Power_On_Hours  0x0032  079  079  000  Old_age  Always  -  15843
 10 Spin_Retry_Count  0x0032  100  100  000  Old_age  Always  -  0
 11 Calibration_Retry_Count 0x0032  100  253  000  Old_age  Always  -  0
 12 Power_Cycle_Count  0x0032  100  100  000  Old_age  Always  -  92
192 Power-Off_Retract_Count 0x0032  200  200  000  Old_age  Always  -  50
193 Load_Cycle_Count  0x0032  200  200  000  Old_age  Always  -  1016
194 Temperature_Celsius  0x0022  118  111  000  Old_age  Always  -  32
196 Reallocated_Event_Count 0x0032  200  200  000  Old_age  Always  -  0
197 Current_Pending_Sector  0x0032  200  200  000  Old_age  Always  -  0
198 Offline_Uncorrectable  0x0030  100  253  000  Old_age  Offline  -  0
199 UDMA_CRC_Error_Count  0x0032  200  200  000  Old_age  Always  -  0
200 Multi_Zone_Error_Rate  0x0008  200  200  000  Old_age  Offline  -  0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description  Status  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline  Completed without error  00%  15765  -
# 2  Extended offline  Completed without error  00%  15678  -
# 3  Short offline  Completed without error  00%  15598  -
# 4  Short offline  Completed without error  00%  15430  -
# 5  Extended offline  Interrupted (host reset)  10%  15341  -
# 6  Short offline  Completed without error  00%  15262  -
# 7  Short offline  Completed without error  00%  15199  -
# 8  Short offline  Completed without error  00%  15021  -
# 9  Extended offline  Completed without error  00%  14934  -
#10  Short offline  Completed without error  00%  14853  -
#11  Short offline  Completed without error  00%  14687  -
#12  Extended offline  Completed without error  00%  14599  -
#13  Short offline  Completed without error  00%  14519  -
#14  Short offline  Completed without error  00%  14304  -
#15  Extended offline  Completed without error  00%  14216  -
#16  Short offline  Completed without error  00%  14136  -
#17  Short offline  Completed without error  00%  13968  -
#18  Extended offline  Completed without error  00%  13881  -
#19  Short offline  Completed without error  00%  13800  -
#20  Short offline  Completed without error  00%  13560  -
#21  Extended offline  Completed without error  00%  13473  -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  1  0  0  Not_testing
  2  0  0  Not_testing
  3  0  0  Not_testing
  4  0  0  Not_testing
  5  0  0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Just ask for any additional info, thanks for reading.
 
Last edited:

Dice

Wizard
Joined
Dec 11, 2015
Messages
1,410
I cannot see anything that strikes me as abnormal except the error message.
I too is interested in the unfolding of this story.
 

Sakuru

Guru
Joined
Nov 20, 2015
Messages
527
Huh, that's weird. ADA2 definitely looks fine. Maybe smartd got confused about which drive it was looking at. Check the SMART values of the rest of your drives.
 

Ericloewe

Server Wrangler
Moderator
Joined
Feb 15, 2014
Messages
20,176
Most likely ada2 changed. Check all drives.
 

ekkzorzizten

Cadet
Joined
May 16, 2015
Messages
3
As suggested i´ve checked the other disks aswell, and here are the results:
ada0:
Code:
[root] ~# smartctl -a /dev/ada0
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:  Western Digital Red
Device Model:  WDC WD30EFRX-68EUZN0
Serial Number:  WD-xxxxxxxxxx
LU WWN Device Id: 5 0014ee 603df6693
Firmware Version: 80.00A80
User Capacity:  3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:  512 bytes logical, 4096 bytes physical
Rotation Rate:  5400 rpm
Device is:  In smartctl database [for details use: -P show]
ATA Version is:  ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:  Tue Nov 29 09:09:27 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
  was never started.
  Auto Offline Data Collection: Disabled.
Self-test execution status:  (  0) The previous self-test routine completed
  without error or no self-test has ever
  been run.
Total time to complete Offline
data collection:  (40020) seconds.
Offline data collection
capabilities:  (0x7b) SMART execute Offline immediate.
  Auto Offline data collection on/off supp  ort.
  Suspend Offline collection upon new
  command.
  Offline surface scan supported.
  Self-test supported.
  Conveyance Self-test supported.
  Selective Self-test supported.
SMART capabilities:  (0x0003) Saves SMART data before entering
  power-saving mode.
  Supports SMART auto save timer.
Error logging capability:  (0x01) Error logging supported.
  General Purpose Logging supported.
Short self-test routine
recommended polling time:  (  2) minutes.
Extended self-test routine
recommended polling time:  ( 401) minutes.
Conveyance self-test routine
recommended polling time:  (  5) minutes.
SCT capabilities:  (0x703d) SCT Status supported.
  SCT Error Recovery Control supported.
  SCT Feature Control supported.
  SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAG  VALUE WORST THRESH TYPE  UPDATED  WHEN_  FAILED RAW_VALUE
  1 Raw_Read_Error_Rate  0x002f  200  200  051  Pre-fail  Always  -  0
  3 Spin_Up_Time  0x0027  184  176  021  Pre-fail  Always  -  5800
  4 Start_Stop_Count  0x0032  097  097  000  Old_age  Always  -  3024
  5 Reallocated_Sector_Ct  0x0033  200  200  140  Pre-fail  Always  -  0
  7 Seek_Error_Rate  0x002e  200  200  000  Old_age  Always  -  0
  9 Power_On_Hours  0x0032  068  068  000  Old_age  Always  -  23423
 10 Spin_Retry_Count  0x0032  100  100  000  Old_age  Always  -  0
 11 Calibration_Retry_Count 0x0032  100  100  000  Old_age  Always  -  0
 12 Power_Cycle_Count  0x0032  099  099  000  Old_age  Always  -  1976
192 Power-Off_Retract_Count 0x0032  200  200  000  Old_age  Always  -  77
193 Load_Cycle_Count  0x0032  199  199  000  Old_age  Always  -  3113
194 Temperature_Celsius  0x0022  119  112  000  Old_age  Always  -  31
196 Reallocated_Event_Count 0x0032  200  200  000  Old_age  Always  -  0
197 Current_Pending_Sector  0x0032  200  200  000  Old_age  Always  -  0
198 Offline_Uncorrectable  0x0030  100  253  000  Old_age  Offline  -  0
199 UDMA_CRC_Error_Count  0x0032  200  200  000  Old_age  Always  -  0
200 Multi_Zone_Error_Rate  0x0008  200  200  000  Old_age  Offline  -  0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description  Status  Remaining  LifeTime(hours)  LBA  _of_first_error
# 1  Short offline  Completed without error  00%  23345  -
# 2  Extended offline  Completed without error  00%  23258  -
# 3  Short offline  Completed without error  00%  23178  -
# 4  Short offline  Completed without error  00%  23010  -
# 5  Extended offline  Interrupted (host reset)  10%  22921  -
# 6  Short offline  Completed without error  00%  22842  -
# 7  Short offline  Completed without error  00%  22779  -
# 8  Short offline  Completed without error  00%  22601  -
# 9  Extended offline  Completed without error  00%  22514  -
#10  Short offline  Completed without error  00%  22434  -
#11  Short offline  Completed without error  00%  22266  -
#12  Extended offline  Completed without error  00%  22179  -
#13  Short offline  Completed without error  00%  22099  -
#14  Short offline  Completed without error  00%  21883  -
#15  Extended offline  Completed without error  00%  21796  -
#16  Short offline  Completed without error  00%  21715  -
#17  Short offline  Completed without error  00%  21547  -
#18  Extended offline  Completed without error  00%  21460  -
#19  Short offline  Completed without error  00%  21380  -
#20  Short offline  Completed without error  00%  21140  -
#21  Extended offline  Completed without error  00%  21052  -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  1  0  0  Not_testing
  2  0  0  Not_testing
  3  0  0  Not_testing
  4  0  0  Not_testing
  5  0  0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


ada1:
Code:
[root] ~# smartctl -a /dev/ada1
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:  Western Digital Red
Device Model:  WDC WD30EFRX-68AX9N0
Serial Number:  WD-xxxxxxxxxx
LU WWN Device Id: 5 0014ee 25e4dfb04
Firmware Version: 80.00A80
User Capacity:  3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:  512 bytes logical, 4096 bytes physical
Device is:  In smartctl database [for details use: -P show]
ATA Version is:  ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:  Tue Nov 29 09:10:35 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
  was never started.
  Auto Offline Data Collection: Disabled.
Self-test execution status:  (  0) The previous self-test routine completed
  without error or no self-test has ever
  been run.
Total time to complete Offline
data collection:  (39840) seconds.
Offline data collection
capabilities:  (0x7b) SMART execute Offline immediate.
  Auto Offline data collection on/off support.
  Suspend Offline collection upon new
  command.
  Offline surface scan supported.
  Self-test supported.
  Conveyance Self-test supported.
  Selective Self-test supported.
SMART capabilities:  (0x0003) Saves SMART data before entering
  power-saving mode.
  Supports SMART auto save timer.
Error logging capability:  (0x01) Error logging supported.
  General Purpose Logging supported.
Short self-test routine
recommended polling time:  (  2) minutes.
Extended self-test routine
recommended polling time:  ( 399) minutes.
Conveyance self-test routine
recommended polling time:  (  5) minutes.
SCT capabilities:  (0x70bd) SCT Status supported.
  SCT Error Recovery Control supported.
  SCT Feature Control supported.
  SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAG  VALUE WORST THRESH TYPE  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate  0x002f  200  200  051  Pre-fail  Always  -  0
  3 Spin_Up_Time  0x0027  181  174  021  Pre-fail  Always  -  5908
  4 Start_Stop_Count  0x0032  098  098  000  Old_age  Always  -  2979
  5 Reallocated_Sector_Ct  0x0033  200  200  140  Pre-fail  Always  -  0
  7 Seek_Error_Rate  0x002e  200  200  000  Old_age  Always  -  0
  9 Power_On_Hours  0x0032  068  068  000  Old_age  Always  -  23387
 10 Spin_Retry_Count  0x0032  100  100  000  Old_age  Always  -  0
 11 Calibration_Retry_Count 0x0032  100  100  000  Old_age  Always  -  0
 12 Power_Cycle_Count  0x0032  099  099  000  Old_age  Always  -  1948
192 Power-Off_Retract_Count 0x0032  200  200  000  Old_age  Always  -  69
193 Load_Cycle_Count  0x0032  200  200  000  Old_age  Always  -  2909
194 Temperature_Celsius  0x0022  119  113  000  Old_age  Always  -  31
196 Reallocated_Event_Count 0x0032  200  200  000  Old_age  Always  -  0
197 Current_Pending_Sector  0x0032  200  200  000  Old_age  Always  -  0
198 Offline_Uncorrectable  0x0030  100  253  000  Old_age  Offline  -  0
199 UDMA_CRC_Error_Count  0x0032  200  200  000  Old_age  Always  -  0
200 Multi_Zone_Error_Rate  0x0008  200  200  000  Old_age  Offline  -  0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description  Status  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline  Completed without error  00%  23310  -
# 2  Extended offline  Completed without error  00%  23222  -
# 3  Short offline  Completed without error  00%  23141  -
# 4  Short offline  Completed without error  00%  22974  -
# 5  Extended offline  Interrupted (host reset)  10%  22885  -
# 6  Short offline  Completed without error  00%  22806  -
# 7  Short offline  Completed without error  00%  22743  -
# 8  Short offline  Completed without error  00%  22565  -
# 9  Extended offline  Completed without error  00%  22478  -
#10  Short offline  Completed without error  00%  22459  -
#11  Short offline  Completed without error  00%  22397  -
#12  Short offline  Completed without error  00%  22230  -
#13  Extended offline  Completed without error  00%  22143  -
#14  Short offline  Completed without error  00%  22063  -
#15  Short offline  Completed without error  00%  21847  -
#16  Extended offline  Completed without error  00%  21760  -
#17  Short offline  Completed without error  00%  21679  -
#18  Short offline  Completed without error  00%  21511  -
#19  Extended offline  Completed without error  00%  21424  -
#20  Short offline  Completed without error  00%  21343  -
#21  Short offline  Completed without error  00%  21104  -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  1  0  0  Not_testing
  2  0  0  Not_testing
  3  0  0  Not_testing
  4  0  0  Not_testing
  5  0  0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


ada2:
Code:
[root] ~# smartctl -a /dev/ada2
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:  Western Digital Red
Device Model:  WDC WD30EFRX-68EUZN0
Serial Number:  WD-xxxxxxxxxx
LU WWN Device Id: 5 0014ee 6afac892a
Firmware Version: 82.00A82
User Capacity:  3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:  512 bytes logical, 4096 bytes physical
Rotation Rate:  5400 rpm
Device is:  In smartctl database [for details use: -P show]
ATA Version is:  ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:  Tue Nov 29 09:11:43 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
  was never started.
  Auto Offline Data Collection: Disabled.
Self-test execution status:  (  0) The previous self-test routine completed
  without error or no self-test has ever
  been run.
Total time to complete Offline
data collection:  (40320) seconds.
Offline data collection
capabilities:  (0x7b) SMART execute Offline immediate.
  Auto Offline data collection on/off support.
  Suspend Offline collection upon new
  command.
  Offline surface scan supported.
  Self-test supported.
  Conveyance Self-test supported.
  Selective Self-test supported.
SMART capabilities:  (0x0003) Saves SMART data before entering
  power-saving mode.
  Supports SMART auto save timer.
Error logging capability:  (0x01) Error logging supported.
  General Purpose Logging supported.
Short self-test routine
recommended polling time:  (  2) minutes.
Extended self-test routine
recommended polling time:  ( 404) minutes.
Conveyance self-test routine
recommended polling time:  (  5) minutes.
SCT capabilities:  (0x703d) SCT Status supported.
  SCT Error Recovery Control supported.
  SCT Feature Control supported.
  SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAG  VALUE WORST THRESH TYPE  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate  0x002f  200  200  051  Pre-fail  Always  -  0
  3 Spin_Up_Time  0x0027  186  179  021  Pre-fail  Always  -  5691
  4 Start_Stop_Count  0x0032  100  100  000  Old_age  Always  -  328
  5 Reallocated_Sector_Ct  0x0033  200  200  140  Pre-fail  Always  -  0
  7 Seek_Error_Rate  0x002e  200  200  000  Old_age  Always  -  0
  9 Power_On_Hours  0x0032  079  079  000  Old_age  Always  -  15836
 10 Spin_Retry_Count  0x0032  100  100  000  Old_age  Always  -  0
 11 Calibration_Retry_Count 0x0032  100  253  000  Old_age  Always  -  0
 12 Power_Cycle_Count  0x0032  100  100  000  Old_age  Always  -  92
192 Power-Off_Retract_Count 0x0032  200  200  000  Old_age  Always  -  50
193 Load_Cycle_Count  0x0032  200  200  000  Old_age  Always  -  1024
194 Temperature_Celsius  0x0022  119  112  000  Old_age  Always  -  31
196 Reallocated_Event_Count 0x0032  200  200  000  Old_age  Always  -  0
197 Current_Pending_Sector  0x0032  200  200  000  Old_age  Always  -  0
198 Offline_Uncorrectable  0x0030  100  253  000  Old_age  Offline  -  0
199 UDMA_CRC_Error_Count  0x0032  200  200  000  Old_age  Always  -  0
200 Multi_Zone_Error_Rate  0x0008  200  200  000  Old_age  Offline  -  0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description  Status  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline  Completed without error  00%  15811  -
# 2  Short offline  Completed without error  00%  15758  -
# 3  Extended offline  Completed without error  00%  15670  -
# 4  Short offline  Completed without error  00%  15590  -
# 5  Short offline  Completed without error  00%  15422  -
# 6  Extended offline  Interrupted (host reset)  10%  15333  -
# 7  Short offline  Completed without error  00%  15254  -
# 8  Short offline  Completed without error  00%  15192  -
# 9  Short offline  Completed without error  00%  15014  -
#10  Extended offline  Completed without error  00%  14926  -
#11  Short offline  Completed without error  00%  14846  -
#12  Short offline  Completed without error  00%  14679  -
#13  Extended offline  Completed without error  00%  14592  -
#14  Short offline  Completed without error  00%  14512  -
#15  Short offline  Completed without error  00%  14296  -
#16  Extended offline  Completed without error  00%  14209  -
#17  Short offline  Completed without error  00%  14128  -
#18  Short offline  Completed without error  00%  13960  -
#19  Extended offline  Completed without error  00%  13873  -
#20  Short offline  Completed without error  00%  13793  -
#21  Short offline  Completed without error  00%  13553  -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  1  0  0  Not_testing
  2  0  0  Not_testing
  3  0  0  Not_testing
  4  0  0  Not_testing
  5  0  0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


ada3:
Code:
[root] ~# smartctl -a /dev/ada3
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:  Western Digital Red
Device Model:  WDC WD30EFRX-68EUZN0
Serial Number:  WD-xxxxxxxxxx
LU WWN Device Id: 5 0014ee 60501e8f3
Firmware Version: 82.00A82
User Capacity:  3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:  512 bytes logical, 4096 bytes physical
Rotation Rate:  5400 rpm
Device is:  In smartctl database [for details use: -P show]
ATA Version is:  ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:  Tue Nov 29 09:12:13 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
  was never started.
  Auto Offline Data Collection: Disabled.
Self-test execution status:  (  0) The previous self-test routine completed
  without error or no self-test has ever
  been run.
Total time to complete Offline
data collection:  (39540) seconds.
Offline data collection
capabilities:  (0x7b) SMART execute Offline immediate.
  Auto Offline data collection on/off support.
  Suspend Offline collection upon new
  command.
  Offline surface scan supported.
  Self-test supported.
  Conveyance Self-test supported.
  Selective Self-test supported.
SMART capabilities:  (0x0003) Saves SMART data before entering
  power-saving mode.
  Supports SMART auto save timer.
Error logging capability:  (0x01) Error logging supported.
  General Purpose Logging supported.
Short self-test routine
recommended polling time:  (  2) minutes.
Extended self-test routine
recommended polling time:  ( 397) minutes.
Conveyance self-test routine
recommended polling time:  (  5) minutes.
SCT capabilities:  (0x703d) SCT Status supported.
  SCT Error Recovery Control supported.
  SCT Feature Control supported.
  SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAG  VALUE WORST THRESH TYPE  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate  0x002f  200  200  051  Pre-fail  Always  -  0
  3 Spin_Up_Time  0x0027  183  176  021  Pre-fail  Always  -  5833
  4 Start_Stop_Count  0x0032  100  100  000  Old_age  Always  -  317
  5 Reallocated_Sector_Ct  0x0033  200  200  140  Pre-fail  Always  -  0
  7 Seek_Error_Rate  0x002e  200  200  000  Old_age  Always  -  0
  9 Power_On_Hours  0x0032  079  079  000  Old_age  Always  -  15843
 10 Spin_Retry_Count  0x0032  100  100  000  Old_age  Always  -  0
 11 Calibration_Retry_Count 0x0032  100  253  000  Old_age  Always  -  0
 12 Power_Cycle_Count  0x0032  100  100  000  Old_age  Always  -  92
192 Power-Off_Retract_Count 0x0032  200  200  000  Old_age  Always  -  50
193 Load_Cycle_Count  0x0032  200  200  000  Old_age  Always  -  1016
194 Temperature_Celsius  0x0022  118  111  000  Old_age  Always  -  32
196 Reallocated_Event_Count 0x0032  200  200  000  Old_age  Always  -  0
197 Current_Pending_Sector  0x0032  200  200  000  Old_age  Always  -  0
198 Offline_Uncorrectable  0x0030  100  253  000  Old_age  Offline  -  0
199 UDMA_CRC_Error_Count  0x0032  200  200  000  Old_age  Always  -  0
200 Multi_Zone_Error_Rate  0x0008  200  200  000  Old_age  Offline  -  0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description  Status  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline  Completed without error  00%  15765  -
# 2  Extended offline  Completed without error  00%  15678  -
# 3  Short offline  Completed without error  00%  15598  -
# 4  Short offline  Completed without error  00%  15430  -
# 5  Extended offline  Interrupted (host reset)  10%  15341  -
# 6  Short offline  Completed without error  00%  15262  -
# 7  Short offline  Completed without error  00%  15199  -
# 8  Short offline  Completed without error  00%  15021  -
# 9  Extended offline  Completed without error  00%  14934  -
#10  Short offline  Completed without error  00%  14853  -
#11  Short offline  Completed without error  00%  14687  -
#12  Extended offline  Completed without error  00%  14599  -
#13  Short offline  Completed without error  00%  14519  -
#14  Short offline  Completed without error  00%  14304  -
#15  Extended offline  Completed without error  00%  14216  -
#16  Short offline  Completed without error  00%  14136  -
#17  Short offline  Completed without error  00%  13968  -
#18  Extended offline  Completed without error  00%  13881  -
#19  Short offline  Completed without error  00%  13800  -
#20  Short offline  Completed without error  00%  13560  -
#21  Extended offline  Completed without error  00%  13473  -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  1  0  0  Not_testing
  2  0  0  Not_testing
  3  0  0  Not_testing
  4  0  0  Not_testing
  5  0  0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Doesn´t it look like all disks are fine?
 

ekkzorzizten

Cadet
Joined
May 16, 2015
Messages
3
Well, where do i go from here then? And why did i receive this error message when clearly there isn´t anything wrong with the disks. Should i just leave it be? Report a bug to someone?
 

leenux_tux

Patron
Joined
Sep 3, 2011
Messages
238
I had exactly the same issue. SMARTD logged an error for one of my SSD's in the GUI, yet when I smartctl over the drive it was not showing any errors. In fact this is the third time this has happened to this specific SSD.

The SSD is a mirror with a similar SSD used for logging and caching and is connected to the motherboard via the onboard SATA, I have two internal M1015's but all connections are used. joeschmuck suggested I swap cables on the offending drive to see if it's the cable thats causing the issue, you might want to try this before changing the drive.

My first test is to move the SATA connection on the motherboard (swap the two around) to see if the errors start to appear on the other drive, if they do ? I might have a bad SATA connector. If they don't (still log errors for the same drive) I will then look at changing cables. This test is currently in place.
 

Robert Trevellyan

Pony Wrangler
Joined
May 16, 2014
Messages
3,778
FAILED SMART self-check
The original message says that smartd was unable to check the disk. That can occur because the disk is failing, but clearly it can occur for other reasons. I'm not saying I know what those other reasons might be. I suppose the message from smartd is meant to get your attention just in case, so it did its job.

I point this out because the message would be different if the disk has failed a SMART test. At this point, it may be worth once again pointing out the difference between SMART checks and SMART tests. The checks are the thing that the smartd service does (every 30 minutes by default) to read the contents of the SMART attributes, which the drive updates continuously on its own. The tests are what you initiate manually or from a scheduled task, the results of which (pass or fail) are logged separately from the SMART attributes.

I'm not sure what my point is here...

:p
 
Last edited:
Status
Not open for further replies.
Top