smartctl SCSI error

[Caffe Mocha]

Hello， I recently came across a HGST HSMM1616ASS201 SAS SSD 。 the short smart test works but whenever I tried smartctl - long /dev/da*
it came back with a error message of Long (extended) offline self test failed [unsupported field in scsi command]。
is there anyway I can do a long smartctl test ? I believe my freenas Version is FreeNAS-9.10-STABLE-201604111739。

 

[joeschmuck]

Does that drive support an extended test? Google didn't find that model number for the drive so is this a hybrid drive or just a SSD? Go ahead and post the output of smartctl -a /dev/da*. This will tell us more details to help you.

 

[Caffe Mocha]

My model is HSUMM1616ASS205 。 Thank you

Code:

=== START OF INFORMATION SECTION ===										 
Vendor:			   HGST													
Product:			  HUSMM151CLAR1600										
Revision:			 C29C													
Compliance:		   SPC-4													
User Capacity:		1,600,321,314,816 bytes [1.60 TB]						
Logical block size:   512 bytes												
Physical block size:  4096 bytes												
LU is resource provisioned, LBPRZ=1											
Rotation Rate:		Solid State Device										
Form Factor:		  2.5 inches												
Logical Unit id:	  0x5000cca050483414										
Serial number:		0SW8PZPA												
Device type:		  disk													
Transport protocol:   SAS (SPL-3)											
Local Time is:		Wed Mar 22 19:04:33 2017 CST							
SMART support is:	 Available - device has SMART capability.				
SMART support is:	 Enabled												
Temperature Warning:  Enabled
=== START OF READ SMART DATA SECTION ===																							
SMART Health Status: OK																											
																																
Percentage used endurance indicator: 0%																							
Current Drive Temperature:	 29 C																								
Drive Trip Temperature:		65 C																								
																																
Manufactured in week 40 of year 2015																								
Specified cycle count over device lifetime:  0																					
Accumulated start-stop cycles:  0																								
Specified load-unload count over device lifetime:  0																				
Accumulated load-unload cycles:  0																								
defect list format 6 unknown																										
Elements in grown defect list: 0																									
																																
Vendor (Seagate) cache information																								
  Blocks sent to initiator = 7739291																								
																																
Error counter log:																												
		   Errors Corrected by		   Total   Correction	 Gigabytes	Total												
			   ECC		  rereads/	errors   algorithm	  processed	uncorrected											
		   fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors												
read:		  0		0		 0		 0		  0	 308680.157		   0		
write:		 0		0		 0		 0		  0	 171329.895		   0												
																																
Non-medium error count:		0																									
																																
SMART Self-test log																												
Num  Test			  Status				 segment  LifeTime  LBA_first_err [SK ASC ASQ]										
	 Description							  number   (hours)																	
# 1  Background short  Completed				   -	 732				 - [-   -	-]										
# 2  Background short  Completed				   -	 732				 - [-   -	-]										
																																
Long (extended) Self Test duration: 6 seconds [0.1 minutes]   

 

[joeschmuck]

Okay, so it is a SSD which means that you do not need to do an Extended test (just my opinion) but the data you provided does seem to support that an Extended test is possible. I'm curious what smartctl -x /dev/ad* would produce.

Anyway the SSD actually tracks itself better than a traditional hard drive so you only need to look at the wear level indicator, on your drive it's "Percentage used endurance indicator: 0%". I'd run a SMART Short test daily and if anything does come up as an error, it will show up there.

And that sounds like a very nice drive, looks like the endurance is excellent.

 

[Caffe Mocha]

Smartctl -x results are provided below. Hope I didn't skipped a few lines. HGST has a software that can check the health of the ssd. might try it someday. but software is windows only.... (sigh..)

Code:

=== START OF INFORMATION SECTION ===																								
Vendor:			   HGST																										 
Product:			  HUSMM151CLAR1600																							 
Revision:			 C29C																										 
Compliance:		   SPC-4																										
User Capacity:		1,600,321,314,816 bytes [1.60 TB]																			
Logical block size:   512 bytes																									
Physical block size:  4096 bytes																									
LU is resource provisioned, LBPRZ=1																								
Rotation Rate:		Solid State Device																							
Form Factor:		  2.5 inches																									
Logical Unit id:	  0x5000cca050483414																							
Serial number:		0SW8PZPA																									 
Device type:		  disk																										 
Transport protocol:   SAS (SPL-3)																								 
Local Time is:		Thu Mar 23 07:22:05 2017 CST																				 
SMART support is:	 Available - device has SMART capability.																	 
SMART support is:	 Enabled																									 
Temperature Warning:  Enabled																									 
Read Cache is:		Enabled																									 
Writeback Cache is:   Disabled																									 
																																  
=== START OF READ SMART DATA SECTION ===																							
SMART Health Status: OK																											
																																  
Percentage used endurance indicator: 0%																							
Current Drive Temperature:	 31 C																								
Drive Trip Temperature:		65 C																								
																																  
Manufactured in week 40 of year 2015																								
Specified cycle count over device lifetime:  0																					 
Accumulated start-stop cycles:  0																								 
Specified load-unload count over device lifetime:  0																				
Accumulated load-unload cycles:  0																								 
defect list format 6 unknown																										
Elements in grown defect list: 0																									
																																  
Vendor (Seagate) cache information																								 
  Blocks sent to initiator = 7743720																								
																																  
Error counter log:																												 
		   Errors Corrected by		   Total   Correction	 Gigabytes	Total												 
			   ECC		  rereads/	errors   algorithm	  processed	uncorrected											
		   fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors												
read:		  0		0		 0		 0		  0	 308680.166		   0												
write:		 0		0		 0		 0		  0	 171330.922		   0
Non-medium error count:		0																									
																																  
SMART Self-test log																												
Num  Test			  Status				 segment  LifeTime  LBA_first_err [SK ASC ASQ]										
	 Description							  number   (hours)																	 
# 1  Background short  Completed				   -	 848				 - [-   -	-]										
# 2  Background short  Completed				   -	 732				 - [-   -	-]										
# 3  Background short  Completed				   -	 732				 - [-   -	-]										
																																  
Long (extended) Self Test duration: 6 seconds [0.1 minutes]																		
																																  
Background scan results log																										
  Status: waiting until BMS interval timer expires																				 
	Accumulated power on time, hours:minutes 859:44 [51584 minutes]																
	Number of background scans performed: 22,  scan progress: 0.00%																
	Number of background medium scans performed: 22																				
																																  
Protocol Specific port log page for SAS SSP																						
relative target port id = 1																										
  generation code = 1																											 
  number of phys = 1																												
  phy identifier = 0																												
	attached device type: SAS or SATA device																						
	attached reason: loss of dword synchronization																				 
	reason: unknown																												
	negotiated logical link rate: phy enabled; 6 Gbps																			 
	attached initiator port: ssp=1 stp=1 smp=1																					 
	attached target port: ssp=0 stp=0 smp=0																						
	SAS address = 0x5000cca050483415 
attached SAS address = 0x500605b003ce21d0																					 
	attached phy identifier = 1																									
	Invalid DWORD count = 0																										
	Running disparity error count = 0																							 
	Loss of DWORD synchronization = 2																							 
	Phy reset problem = 0																										 
	Phy event descriptors:																										 
	 Invalid word count: 0																										 
	 Running disparity error count: 0																							 
	 Loss of dword synchronization count: 2																					
Phy reset problem count: 0																									
relative target port id = 2																										
  generation code = 1																											  
  number of phys = 1																												
  phy identifier = 1																												
	attached device type: no device attached																						
	attached reason: unknown																										
	reason: power on																												
	negotiated logical link rate: phy enabled; unknown																			
	attached initiator port: ssp=0 stp=0 smp=0																					
	attached target port: ssp=0 stp=0 smp=0																						
	SAS address = 0x5000cca050483416																								
	attached SAS address = 0x0																									
	attached phy identifier = 0																									
	Invalid DWORD count = 0																										
	Running disparity error count = 0																							  
	Loss of DWORD synchronization = 0																							  
	Phy reset problem = 0																										  
	Phy event descriptors:																										
	 Invalid word count: 0																										
	 Running disparity error count: 0																							  
	 Loss of dword synchronization count: 0																						
	 Phy reset problem count: 0