Kevin Horton
Guru
- Joined
- Dec 2, 2015
- Messages
- 730
I'm no longer getting emails about posts either. That functionality seems to have died.Sorry chaps, for some reason I didn't get a prompt that you had posted.
I'm completely stumped. The portion of the code that controls the CPU fan, checks its speed, and resets the BMC, etc is unchanged from Stux's original code. I cannot find anything in the code that could explain the behavior you are getting.Thanks also Stux, I lowered FAN1 thresholds and this is the result:
Code:root@NAS:/mnt/Storage/Scripts # ipmitool sensor thresh FAN1 lower 0 100 200 Locating sensor record 'FAN1'... Setting sensor "FAN1" Lower Non-Recoverable threshold to 0.000 Setting sensor "FAN1" Lower Critical threshold to 100.000 Setting sensor "FAN1" Lower Non-Critical threshold to 200.000 root@NAS:/mnt/Storage/Scripts # ipmitool sensor CPU Temp | 23.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 95.000 | 100.000 | 100.000 PCH Temp | 28.000 | degrees C | ok | 0.000 | 5.000 | 16.000 | 90.000 | 95.000 | 100.000 System Temp | 20.000 | degrees C | ok | -10.000 | -5.000 | 0.000 | 80.000 | 85.000 | 90.000 Peripheral Temp | 23.000 | degrees C | ok | -14.000 | -9.000 | -4.000 | 76.000 | 81.000 | 86.000 VcpuVRM Temp | 22.000 | degrees C | ok | -5.000 | 0.000 | 5.000 | 95.000 | 100.000 | 105.000 DIMMA1 Temp | na | | na | na | na | na | na | na | na DIMMA2 Temp | 21.000 | degrees C | ok | -5.000 | 0.000 | 5.000 | 80.000 | 85.000 | 90.000 DIMMB1 Temp | na | | na | na | na | na | na | na | na DIMMB2 Temp | 20.000 | degrees C | ok | -5.000 | 0.000 | 5.000 | 80.000 | 85.000 | 90.000 FAN1 | 1000.000 | RPM | ok | 0.000 | 100.000 | 200.000 | 3200.000 | 3300.000 | 3400.000 FAN2 | 400.000 | RPM | nc | 200.000 | 300.000 | 400.000 | 2400.000 | 2500.000 | 2600.000 FAN3 | 400.000 | RPM | nc | 200.000 | 300.000 | 400.000 | 2400.000 | 2500.000 | 2600.000 FAN4 | 400.000 | RPM | nc | 200.000 | 300.000 | 400.000 | 2400.000 | 2500.000 | 2600.000 FANA | 700.000 | RPM | nc | 500.000 | 600.000 | 700.000 | 1300.000 | 1400.000 | 1500.000 12V | 12.448 | Volts | ok | 10.144 | 10.272 | 10.784 | 12.960 | 13.280 | 13.408 5VCC | 5.000 | Volts | ok | 4.246 | 4.298 | 4.480 | 5.390 | 5.546 | 5.598 3.3VCC | 3.384 | Volts | ok | 2.789 | 2.823 | 2.959 | 3.554 | 3.656 | 3.690 VBAT | 2.972 | Volts | ok | 2.384 | 2.496 | 2.580 | 3.476 | 3.588 | 3.672 VCPU | 1.039 | Volts | ok | 0.076 | 0.076 | 0.076 | 1.516 | 1.516 | 1.516 VDIMMAB | 1.200 | Volts | ok | 0.948 | 0.975 | 1.047 | 1.344 | 1.425 | 1.443 5VSB | 4.974 | Volts | ok | 4.246 | 4.376 | 4.480 | 5.390 | 5.546 | 5.598 3.3VSB | 3.231 | Volts | ok | 2.789 | 2.891 | 2.959 | 3.554 | 3.656 | 3.690 VBMC 1.2V | 1.209 | Volts | ok | 1.020 | 1.047 | 1.092 | 1.344 | 1.371 | 1.398 VPCH 1.0V | 1.007 | Volts | ok | 0.872 | 0.890 | 0.917 | 1.043 | 1.052 | 1.070 Chassis Intru | 0x0 | discrete | 0x0000| na | na | na | na | na | na root@NAS:/mnt/Storage/Scripts # cd /mnt/Storage/Scripts root@NAS:/mnt/Storage/Scripts # ls PID_fan_control.pl root@NAS:/mnt/Storage/Scripts # ./PID_fan_control.pl 2018-11-01 20:31:35: ada0 ada1 ada2 ada3 ada4 ada5 ada6 da0 da1 2018-11-01 20:31:35: ada0 2018-11-01 20:31:35: ada1 2018-11-01 20:31:35: ada2 2018-11-01 20:31:35: ada3 2018-11-01 20:31:35: ada4 2018-11-01 20:31:35: ada5 2018-11-01 20:31:35: ada6 2018-11-01 20:31:35: da0 2018-11-01 20:31:35: da1 2018-11-01 20:31:35: fanmode: full = 1 2018-11-01 20:31:35: Setting fan mode to 1 (full) 2018-11-01 20:31:40: core_temps: 26.0 26.0 31.0 31.0 2018-11-01 20:31:40: core_temp = 26.0 C 2018-11-01 20:31:40: core_temp = 26.0 C 2018-11-01 20:31:40: core_temp = 31.0 C 2018-11-01 20:31:40: core_temp = 31.0 C 2018-11-01 20:31:40: CPU Temp: 31.0 2018-11-01 20:31:40: CPU Temp: 31.0 <= 35, CPU Fan going low. 2018-11-01 20:31:40: CPU Fan: low 2018-11-01 20:31:40: CPU Fan changing... (low) 2018-11-01 20:31:40: Setting Zone 0 duty cycle to 40% 2018-11-01 20:31:40: ada0 ada1 ada2 ada3 ada4 ada5 ada6 da0 da1 2018-11-01 20:31:40: ada0 2018-11-01 20:31:40: ada1 2018-11-01 20:31:40: ada2 2018-11-01 20:31:40: ada3 2018-11-01 20:31:40: ada4 2018-11-01 20:31:40: ada5 2018-11-01 20:31:40: ada6 2018-11-01 20:31:40: da0 2018-11-01 20:31:40: da1 2018-11-01 20:31:41: temperature error = -13.8571428571429 2018-11-01 20:31:41: PID corrections are P = -110.857142857143, I = 0 and D = 0 2018-11-01 20:31:41: PID control new duty cycle is 30% 2018-11-01 20:31:41: Setting Zone 1 duty cycle to 30% 2018-11-01 20:31:41: core_temps: 30.0 30.0 26.0 26.0 2018-11-01 20:31:41: core_temp = 30.0 C 2018-11-01 20:31:41: core_temp = 30.0 C 2018-11-01 20:31:41: core_temp = 26.0 C 2018-11-01 20:31:41: core_temp = 26.0 C 2018-11-01 20:31:41: CPU Temp: 30.0 2018-11-01 20:31:42: core_temps: 27.0 27.0 24.0 24.0 2018-11-01 20:31:42: core_temp = 27.0 C 2018-11-01 20:31:42: core_temp = 27.0 C 2018-11-01 20:31:42: core_temp = 24.0 C 2018-11-01 20:31:42: core_temp = 24.0 C 2018-11-01 20:31:42: CPU Temp: 27.0 2018-11-01 20:31:42: CPU Fan: low 2018-11-01 20:31:43: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:31:43: core_temp = 26.0 C 2018-11-01 20:31:43: core_temp = 26.0 C 2018-11-01 20:31:43: core_temp = 24.0 C 2018-11-01 20:31:43: core_temp = 24.0 C 2018-11-01 20:31:43: CPU Temp: 26.0 2018-11-01 20:31:43: CPU Fan: low 2018-11-01 20:31:44: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:31:44: core_temp = 25.0 C 2018-11-01 20:31:44: core_temp = 25.0 C 2018-11-01 20:31:44: core_temp = 24.0 C 2018-11-01 20:31:44: core_temp = 24.0 C 2018-11-01 20:31:44: CPU Temp: 25.0 2018-11-01 20:31:44: CPU Fan: low 2018-11-01 20:31:45: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:31:45: core_temp = 26.0 C 2018-11-01 20:31:45: core_temp = 26.0 C 2018-11-01 20:31:45: core_temp = 24.0 C 2018-11-01 20:31:45: core_temp = 24.0 C 2018-11-01 20:31:45: CPU Temp: 26.0 2018-11-01 20:31:45: CPU Fan: low 2018-11-01 20:31:46: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:31:46: core_temp = 25.0 C 2018-11-01 20:31:46: core_temp = 25.0 C 2018-11-01 20:31:46: core_temp = 24.0 C 2018-11-01 20:31:46: core_temp = 24.0 C 2018-11-01 20:31:46: CPU Temp: 25.0 2018-11-01 20:31:46: CPU Fan: low 2018-11-01 20:31:47: core_temps: 27.0 27.0 24.0 24.0 2018-11-01 20:31:47: core_temp = 27.0 C 2018-11-01 20:31:47: core_temp = 27.0 C 2018-11-01 20:31:47: core_temp = 24.0 C 2018-11-01 20:31:47: core_temp = 24.0 C 2018-11-01 20:31:47: CPU Temp: 27.0 2018-11-01 20:31:47: CPU Fan: low 2018-11-01 20:31:48: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:31:48: core_temp = 26.0 C 2018-11-01 20:31:48: core_temp = 26.0 C 2018-11-01 20:31:48: core_temp = 24.0 C 2018-11-01 20:31:48: core_temp = 24.0 C 2018-11-01 20:31:48: CPU Temp: 26.0 2018-11-01 20:31:48: CPU Fan: low 2018-11-01 20:31:49: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:31:49: core_temp = 26.0 C 2018-11-01 20:31:49: core_temp = 26.0 C 2018-11-01 20:31:49: core_temp = 24.0 C 2018-11-01 20:31:49: core_temp = 24.0 C 2018-11-01 20:31:49: CPU Temp: 26.0 2018-11-01 20:31:49: CPU Fan: low 2018-11-01 20:31:51: core_temps: 27.0 27.0 24.0 24.0 2018-11-01 20:31:51: core_temp = 27.0 C 2018-11-01 20:31:51: core_temp = 27.0 C 2018-11-01 20:31:51: core_temp = 24.0 C 2018-11-01 20:31:51: core_temp = 24.0 C 2018-11-01 20:31:51: CPU Temp: 27.0 2018-11-01 20:31:51: CPU Fan: low 2018-11-01 20:31:52: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:31:52: core_temp = 25.0 C 2018-11-01 20:31:52: core_temp = 25.0 C 2018-11-01 20:31:52: core_temp = 24.0 C 2018-11-01 20:31:52: core_temp = 24.0 C 2018-11-01 20:31:52: CPU Temp: 25.0 2018-11-01 20:31:52: CPU Fan: low 2018-11-01 20:31:52: fan_speed = 3100 2018-11-01 20:31:52: CPU Fan speed: 3100 RPM 2018-11-01 20:31:52: fan_speed = 1100 2018-11-01 20:31:52: HD Fan speed: 1100 RPM 2018-11-01 20:31:52: CPU fan speed should be low, but 3100 > 2000. 2018-11-01 20:31:52: HD fan speed should be low, but 1100 > 1040. 2018-11-01 20:31:52: bmc_fail_count: 1, bmc_fail_threshold: 1 2018-11-01 20:31:52: Fan speeds are not where they should be, will try again. 2018-11-01 20:31:52: fanmode: full = 1 2018-11-01 20:31:52: Setting fan mode to 1 (full) 2018-11-01 20:31:58: Setting Zone 0 duty cycle to 40% 2018-11-01 20:31:58: Setting Zone 1 duty cycle to 30% 2018-11-01 20:31:59: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:31:59: core_temp = 26.0 C 2018-11-01 20:31:59: core_temp = 26.0 C 2018-11-01 20:31:59: core_temp = 24.0 C 2018-11-01 20:31:59: core_temp = 24.0 C 2018-11-01 20:31:59: CPU Temp: 26.0 2018-11-01 20:31:59: CPU Fan: low 2018-11-01 20:32:00: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:32:00: core_temp = 25.0 C 2018-11-01 20:32:00: core_temp = 25.0 C 2018-11-01 20:32:00: core_temp = 24.0 C 2018-11-01 20:32:00: core_temp = 24.0 C 2018-11-01 20:32:00: CPU Temp: 25.0 2018-11-01 20:32:00: CPU Fan: low 2018-11-01 20:32:01: core_temps: 25.0 26.0 25.0 25.0 2018-11-01 20:32:01: core_temp = 25.0 C 2018-11-01 20:32:01: core_temp = 26.0 C 2018-11-01 20:32:01: core_temp = 25.0 C 2018-11-01 20:32:01: core_temp = 25.0 C 2018-11-01 20:32:01: CPU Temp: 26.0 2018-11-01 20:32:01: CPU Fan: low 2018-11-01 20:32:02: core_temps: 25.0 26.0 25.0 25.0 2018-11-01 20:32:02: core_temp = 25.0 C 2018-11-01 20:32:02: core_temp = 26.0 C 2018-11-01 20:32:02: core_temp = 25.0 C 2018-11-01 20:32:02: core_temp = 25.0 C 2018-11-01 20:32:02: CPU Temp: 26.0 2018-11-01 20:32:02: CPU Fan: low 2018-11-01 20:32:03: core_temps: 25.0 25.0 23.0 23.0 2018-11-01 20:32:03: core_temp = 25.0 C 2018-11-01 20:32:03: core_temp = 25.0 C 2018-11-01 20:32:03: core_temp = 23.0 C 2018-11-01 20:32:03: core_temp = 23.0 C 2018-11-01 20:32:03: CPU Temp: 25.0 2018-11-01 20:32:03: CPU Fan: low 2018-11-01 20:32:04: core_temps: 26.0 26.0 23.0 23.0 2018-11-01 20:32:04: core_temp = 26.0 C 2018-11-01 20:32:04: core_temp = 26.0 C 2018-11-01 20:32:04: core_temp = 23.0 C 2018-11-01 20:32:04: core_temp = 23.0 C 2018-11-01 20:32:04: CPU Temp: 26.0 2018-11-01 20:32:04: CPU Fan: low 2018-11-01 20:32:05: core_temps: 24.0 26.0 24.0 24.0 2018-11-01 20:32:05: core_temp = 24.0 C 2018-11-01 20:32:05: core_temp = 26.0 C 2018-11-01 20:32:05: core_temp = 24.0 C 2018-11-01 20:32:05: core_temp = 24.0 C 2018-11-01 20:32:05: CPU Temp: 26.0 2018-11-01 20:32:05: CPU Fan: low 2018-11-01 20:32:06: core_temps: 24.0 27.0 24.0 24.0 2018-11-01 20:32:06: core_temp = 24.0 C 2018-11-01 20:32:06: core_temp = 27.0 C 2018-11-01 20:32:06: core_temp = 24.0 C 2018-11-01 20:32:06: core_temp = 24.0 C 2018-11-01 20:32:06: CPU Temp: 27.0 2018-11-01 20:32:06: CPU Fan: low 2018-11-01 20:32:07: core_temps: 26.0 26.0 23.0 23.0 2018-11-01 20:32:07: core_temp = 26.0 C 2018-11-01 20:32:07: core_temp = 26.0 C 2018-11-01 20:32:07: core_temp = 23.0 C 2018-11-01 20:32:07: core_temp = 23.0 C 2018-11-01 20:32:07: CPU Temp: 26.0 2018-11-01 20:32:07: CPU Fan: low 2018-11-01 20:32:08: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:32:08: core_temp = 26.0 C 2018-11-01 20:32:08: core_temp = 26.0 C 2018-11-01 20:32:08: core_temp = 24.0 C 2018-11-01 20:32:08: core_temp = 24.0 C 2018-11-01 20:32:08: CPU Temp: 26.0 2018-11-01 20:32:08: CPU Fan: low 2018-11-01 20:32:09: core_temps: 24.0 24.0 24.0 24.0 2018-11-01 20:32:09: core_temp = 24.0 C 2018-11-01 20:32:09: core_temp = 24.0 C 2018-11-01 20:32:09: core_temp = 24.0 C 2018-11-01 20:32:09: core_temp = 24.0 C 2018-11-01 20:32:09: CPU Temp: 24.0 2018-11-01 20:32:09: CPU Fan: low 2018-11-01 20:32:09: fan_speed = 3100 2018-11-01 20:32:09: CPU Fan speed: 3100 RPM 2018-11-01 20:32:10: fan_speed = 1100 2018-11-01 20:32:10: HD Fan speed: 1100 RPM 2018-11-01 20:32:10: CPU fan speed should be low, but 3100 > 2000. 2018-11-01 20:32:10: HD fan speed should be low, but 1100 > 1040. 2018-11-01 20:32:10: bmc_fail_count: 2, bmc_fail_threshold: 1 2018-11-01 20:32:10: Fan speeds are still not where they should be after 2 attempts, will reboot BMC. 2018-11-01 20:32:10: fanmode: full = 1 2018-11-01 20:32:10: Setting fan mode to 1 (full) 2018-11-01 20:32:15: Resetting BMC 2018-11-01 20:32:16: core_temps: 26.0 26.0 25.0 25.0 2018-11-01 20:32:16: core_temp = 26.0 C 2018-11-01 20:32:16: core_temp = 26.0 C 2018-11-01 20:32:16: core_temp = 25.0 C 2018-11-01 20:32:16: core_temp = 25.0 C 2018-11-01 20:32:16: CPU Temp: 26.0 2018-11-01 20:32:16: CPU Fan: low 2018-11-01 20:32:17: core_temps: 28.0 28.0 27.0 27.0 2018-11-01 20:32:17: core_temp = 28.0 C 2018-11-01 20:32:17: core_temp = 28.0 C 2018-11-01 20:32:17: core_temp = 27.0 C 2018-11-01 20:32:17: core_temp = 27.0 C 2018-11-01 20:32:17: CPU Temp: 28.0 2018-11-01 20:32:17: CPU Fan: low 2018-11-01 20:32:18: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:32:18: core_temp = 26.0 C 2018-11-01 20:32:18: core_temp = 26.0 C 2018-11-01 20:32:18: core_temp = 24.0 C 2018-11-01 20:32:18: core_temp = 24.0 C 2018-11-01 20:32:18: CPU Temp: 26.0 2018-11-01 20:32:18: CPU Fan: low 2018-11-01 20:32:19: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:32:19: core_temp = 25.0 C 2018-11-01 20:32:19: core_temp = 25.0 C 2018-11-01 20:32:19: core_temp = 24.0 C 2018-11-01 20:32:19: core_temp = 24.0 C 2018-11-01 20:32:19: CPU Temp: 25.0 2018-11-01 20:32:19: CPU Fan: low 2018-11-01 20:32:20: core_temps: 24.0 24.0 24.0 25.0 2018-11-01 20:32:20: core_temp = 24.0 C 2018-11-01 20:32:20: core_temp = 24.0 C 2018-11-01 20:32:20: core_temp = 24.0 C 2018-11-01 20:32:20: core_temp = 25.0 C 2018-11-01 20:32:20: CPU Temp: 25.0 2018-11-01 20:32:20: CPU Fan: low 2018-11-01 20:32:21: core_temps: 27.0 27.0 24.0 24.0 2018-11-01 20:32:21: core_temp = 27.0 C 2018-11-01 20:32:21: core_temp = 27.0 C 2018-11-01 20:32:21: core_temp = 24.0 C 2018-11-01 20:32:21: core_temp = 24.0 C 2018-11-01 20:32:21: CPU Temp: 27.0 2018-11-01 20:32:21: CPU Fan: low 2018-11-01 20:32:22: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:32:22: core_temp = 26.0 C 2018-11-01 20:32:22: core_temp = 26.0 C 2018-11-01 20:32:22: core_temp = 24.0 C 2018-11-01 20:32:22: core_temp = 24.0 C 2018-11-01 20:32:22: CPU Temp: 26.0 2018-11-01 20:32:22: CPU Fan: low 2018-11-01 20:32:23: core_temps: 27.0 27.0 25.0 25.0 2018-11-01 20:32:23: core_temp = 27.0 C 2018-11-01 20:32:23: core_temp = 27.0 C 2018-11-01 20:32:23: core_temp = 25.0 C 2018-11-01 20:32:23: core_temp = 25.0 C 2018-11-01 20:32:23: CPU Temp: 27.0 2018-11-01 20:32:23: CPU Fan: low 2018-11-01 20:32:24: core_temps: 26.0 26.0 24.0 25.0 2018-11-01 20:32:24: core_temp = 26.0 C 2018-11-01 20:32:24: core_temp = 26.0 C 2018-11-01 20:32:24: core_temp = 24.0 C 2018-11-01 20:32:24: core_temp = 25.0 C 2018-11-01 20:32:24: CPU Temp: 26.0 2018-11-01 20:32:24: CPU Fan: low 2018-11-01 20:32:25: core_temps: 24.0 24.0 24.0 24.0 2018-11-01 20:32:25: core_temp = 24.0 C 2018-11-01 20:32:25: core_temp = 24.0 C 2018-11-01 20:32:25: core_temp = 24.0 C 2018-11-01 20:32:25: core_temp = 24.0 C 2018-11-01 20:32:25: CPU Temp: 24.0 2018-11-01 20:32:25: CPU Fan: low 2018-11-01 20:32:26: core_temps: 25.0 25.0 24.0 25.0 2018-11-01 20:32:26: core_temp = 25.0 C 2018-11-01 20:32:26: core_temp = 25.0 C 2018-11-01 20:32:26: core_temp = 24.0 C 2018-11-01 20:32:26: core_temp = 25.0 C 2018-11-01 20:32:26: CPU Temp: 25.0 2018-11-01 20:32:26: CPU Fan: low 2018-11-01 20:32:27: fan_speed = 3100 2018-11-01 20:32:27: CPU Fan speed: 3100 RPM 2018-11-01 20:32:27: fan_speed = 1100 2018-11-01 20:32:27: HD Fan speed: 1100 RPM 2018-11-01 20:32:27: CPU fan speed should be low, but 3100 > 2000. 2018-11-01 20:32:27: HD fan speed should be low, but 1100 > 1040. 2018-11-01 20:32:27: bmc_fail_count: 1, bmc_fail_threshold: 1 2018-11-01 20:32:27: Fan speeds are not where they should be, will try again. 2018-11-01 20:32:27: fanmode: full = 1 2018-11-01 20:32:27: Setting fan mode to 1 (full) 2018-11-01 20:32:32: Setting Zone 0 duty cycle to 40% 2018-11-01 20:32:32: Setting Zone 1 duty cycle to 30% 2018-11-01 20:32:33: core_temps: 30.0 30.0 26.0 29.0 2018-11-01 20:32:33: core_temp = 30.0 C 2018-11-01 20:32:33: core_temp = 30.0 C 2018-11-01 20:32:33: core_temp = 26.0 C 2018-11-01 20:32:33: core_temp = 29.0 C 2018-11-01 20:32:33: CPU Temp: 30.0 2018-11-01 20:32:33: CPU Fan: low 2018-11-01 20:32:34: core_temps: 25.0 25.0 23.0 24.0 2018-11-01 20:32:34: core_temp = 25.0 C 2018-11-01 20:32:34: core_temp = 25.0 C 2018-11-01 20:32:34: core_temp = 23.0 C 2018-11-01 20:32:34: core_temp = 24.0 C 2018-11-01 20:32:34: CPU Temp: 25.0 2018-11-01 20:32:34: CPU Fan: low 2018-11-01 20:32:35: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:32:35: core_temp = 26.0 C 2018-11-01 20:32:35: core_temp = 26.0 C 2018-11-01 20:32:35: core_temp = 24.0 C 2018-11-01 20:32:35: core_temp = 24.0 C 2018-11-01 20:32:35: CPU Temp: 26.0 2018-11-01 20:32:35: CPU Fan: low 2018-11-01 20:32:36: core_temps: 25.0 25.0 25.0 25.0 2018-11-01 20:32:36: core_temp = 25.0 C 2018-11-01 20:32:36: core_temp = 25.0 C 2018-11-01 20:32:36: core_temp = 25.0 C 2018-11-01 20:32:36: core_temp = 25.0 C 2018-11-01 20:32:36: CPU Temp: 25.0 2018-11-01 20:32:36: CPU Fan: low 2018-11-01 20:32:37: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:32:37: core_temp = 25.0 C 2018-11-01 20:32:37: core_temp = 25.0 C 2018-11-01 20:32:37: core_temp = 24.0 C 2018-11-01 20:32:37: core_temp = 24.0 C 2018-11-01 20:32:37: CPU Temp: 25.0 2018-11-01 20:32:37: CPU Fan: low 2018-11-01 20:32:38: core_temps: 25.0 25.0 24.0 25.0 2018-11-01 20:32:38: core_temp = 25.0 C 2018-11-01 20:32:38: core_temp = 25.0 C 2018-11-01 20:32:38: core_temp = 24.0 C 2018-11-01 20:32:38: core_temp = 25.0 C 2018-11-01 20:32:38: CPU Temp: 25.0 2018-11-01 20:32:38: CPU Fan: low 2018-11-01 20:32:40: core_temps: 26.0 26.0 25.0 25.0 2018-11-01 20:32:40: core_temp = 26.0 C 2018-11-01 20:32:40: core_temp = 26.0 C 2018-11-01 20:32:40: core_temp = 25.0 C 2018-11-01 20:32:40: core_temp = 25.0 C 2018-11-01 20:32:40: CPU Temp: 26.0 2018-11-01 20:32:40: CPU Fan: low 2018-11-01 20:32:41: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:32:41: core_temp = 25.0 C 2018-11-01 20:32:41: core_temp = 25.0 C 2018-11-01 20:32:41: core_temp = 24.0 C 2018-11-01 20:32:41: core_temp = 24.0 C 2018-11-01 20:32:41: CPU Temp: 25.0 2018-11-01 20:32:41: CPU Fan: low 2018-11-01 20:32:42: core_temps: 26.0 26.0 23.0 24.0 2018-11-01 20:32:42: core_temp = 26.0 C 2018-11-01 20:32:42: core_temp = 26.0 C 2018-11-01 20:32:42: core_temp = 23.0 C 2018-11-01 20:32:42: core_temp = 24.0 C 2018-11-01 20:32:42: CPU Temp: 26.0 2018-11-01 20:32:42: CPU Fan: low 2018-11-01 20:32:43: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:32:43: core_temp = 26.0 C 2018-11-01 20:32:43: core_temp = 26.0 C 2018-11-01 20:32:43: core_temp = 24.0 C 2018-11-01 20:32:43: core_temp = 24.0 C 2018-11-01 20:32:43: CPU Temp: 26.0 2018-11-01 20:32:43: CPU Fan: low 2018-11-01 20:32:43: fan_speed = 3100 2018-11-01 20:32:43: CPU Fan speed: 3100 RPM 2018-11-01 20:32:43: fan_speed = 1100 2018-11-01 20:32:43: HD Fan speed: 1100 RPM 2018-11-01 20:32:43: CPU fan speed should be low, but 3100 > 2000. 2018-11-01 20:32:43: HD fan speed should be low, but 1100 > 1040. 2018-11-01 20:32:43: bmc_fail_count: 2, bmc_fail_threshold: 1 2018-11-01 20:32:43: Fan speeds are still not where they should be after 2 attempts, will reboot BMC. 2018-11-01 20:32:43: fanmode: full = 1 2018-11-01 20:32:43: Setting fan mode to 1 (full) 2018-11-01 20:32:49: Resetting BMC 2018-11-01 20:32:50: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:32:50: core_temp = 26.0 C 2018-11-01 20:32:50: core_temp = 26.0 C 2018-11-01 20:32:50: core_temp = 24.0 C 2018-11-01 20:32:50: core_temp = 24.0 C 2018-11-01 20:32:50: CPU Temp: 26.0 2018-11-01 20:32:50: CPU Fan: low 2018-11-01 20:32:51: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:32:51: core_temp = 25.0 C 2018-11-01 20:32:51: core_temp = 25.0 C 2018-11-01 20:32:51: core_temp = 24.0 C 2018-11-01 20:32:51: core_temp = 24.0 C 2018-11-01 20:32:51: CPU Temp: 25.0 2018-11-01 20:32:51: CPU Fan: low 2018-11-01 20:32:52: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:32:52: core_temp = 25.0 C 2018-11-01 20:32:52: core_temp = 25.0 C 2018-11-01 20:32:52: core_temp = 24.0 C 2018-11-01 20:32:52: core_temp = 24.0 C 2018-11-01 20:32:52: CPU Temp: 25.0 2018-11-01 20:32:52: CPU Fan: low 2018-11-01 20:32:53: core_temps: 27.0 27.0 24.0 24.0 2018-11-01 20:32:53: core_temp = 27.0 C 2018-11-01 20:32:53: core_temp = 27.0 C 2018-11-01 20:32:53: core_temp = 24.0 C 2018-11-01 20:32:53: core_temp = 24.0 C 2018-11-01 20:32:53: CPU Temp: 27.0 2018-11-01 20:32:53: CPU Fan: low 2018-11-01 20:32:54: core_temps: 25.0 27.0 24.0 24.0 2018-11-01 20:32:54: core_temp = 25.0 C 2018-11-01 20:32:54: core_temp = 27.0 C 2018-11-01 20:32:54: core_temp = 24.0 C 2018-11-01 20:32:54: core_temp = 24.0 C 2018-11-01 20:32:54: CPU Temp: 27.0 2018-11-01 20:32:54: CPU Fan: low 2018-11-01 20:32:55: core_temps: 25.0 25.0 23.0 23.0 2018-11-01 20:32:55: core_temp = 25.0 C 2018-11-01 20:32:55: core_temp = 25.0 C 2018-11-01 20:32:55: core_temp = 23.0 C 2018-11-01 20:32:55: core_temp = 23.0 C 2018-11-01 20:32:55: CPU Temp: 25.0 2018-11-01 20:32:55: CPU Fan: low 2018-11-01 20:32:56: core_temps: 26.0 26.0 23.0 23.0 2018-11-01 20:32:56: core_temp = 26.0 C 2018-11-01 20:32:56: core_temp = 26.0 C 2018-11-01 20:32:56: core_temp = 23.0 C 2018-11-01 20:32:56: core_temp = 23.0 C 2018-11-01 20:32:56: CPU Temp: 26.0 2018-11-01 20:32:56: CPU Fan: low 2018-11-01 20:32:57: core_temps: 25.0 26.0 25.0 25.0 2018-11-01 20:32:57: core_temp = 25.0 C 2018-11-01 20:32:57: core_temp = 26.0 C 2018-11-01 20:32:57: core_temp = 25.0 C 2018-11-01 20:32:57: core_temp = 25.0 C 2018-11-01 20:32:57: CPU Temp: 26.0 2018-11-01 20:32:57: CPU Fan: low 2018-11-01 20:32:58: core_temps: 25.0 25.0 25.0 25.0 2018-11-01 20:32:58: core_temp = 25.0 C 2018-11-01 20:32:58: core_temp = 25.0 C 2018-11-01 20:32:58: core_temp = 25.0 C 2018-11-01 20:32:58: core_temp = 25.0 C 2018-11-01 20:32:58: CPU Temp: 25.0 2018-11-01 20:32:58: CPU Fan: low 2018-11-01 20:32:59: core_temps: 25.0 25.0 23.0 23.0 2018-11-01 20:32:59: core_temp = 25.0 C 2018-11-01 20:32:59: core_temp = 25.0 C 2018-11-01 20:32:59: core_temp = 23.0 C 2018-11-01 20:32:59: core_temp = 23.0 C 2018-11-01 20:32:59: CPU Temp: 25.0 2018-11-01 20:32:59: CPU Fan: low 2018-11-01 20:33:00: core_temps: 33.0 33.0 27.0 30.0 2018-11-01 20:33:00: core_temp = 33.0 C 2018-11-01 20:33:00: core_temp = 33.0 C 2018-11-01 20:33:00: core_temp = 27.0 C 2018-11-01 20:33:00: core_temp = 30.0 C 2018-11-01 20:33:00: CPU Temp: 33.0 2018-11-01 20:33:00: CPU Fan: low 2018-11-01 20:33:00: fan_speed = 3100 2018-11-01 20:33:00: CPU Fan speed: 3100 RPM 2018-11-01 20:33:01: fan_speed = 1100 2018-11-01 20:33:01: HD Fan speed: 1100 RPM 2018-11-01 20:33:01: CPU fan speed should be low, but 3100 > 2000. 2018-11-01 20:33:01: HD fan speed should be low, but 1100 > 1040. 2018-11-01 20:33:01: bmc_fail_count: 1, bmc_fail_threshold: 1 2018-11-01 20:33:01: Fan speeds are not where they should be, will try again. 2018-11-01 20:33:01: fanmode: full = 1 2018-11-01 20:33:01: Setting fan mode to 1 (full) 2018-11-01 20:33:06: Setting Zone 0 duty cycle to 40% 2018-11-01 20:33:06: Setting Zone 1 duty cycle to 30% 2018-11-01 20:33:07: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:33:07: core_temp = 26.0 C 2018-11-01 20:33:07: core_temp = 26.0 C 2018-11-01 20:33:07: core_temp = 24.0 C 2018-11-01 20:33:07: core_temp = 24.0 C 2018-11-01 20:33:07: CPU Temp: 26.0 2018-11-01 20:33:07: CPU Fan: low 2018-11-01 20:33:08: core_temps: 25.0 25.0 25.0 25.0 2018-11-01 20:33:08: core_temp = 25.0 C 2018-11-01 20:33:08: core_temp = 25.0 C 2018-11-01 20:33:08: core_temp = 25.0 C 2018-11-01 20:33:08: core_temp = 25.0 C 2018-11-01 20:33:08: CPU Temp: 25.0 2018-11-01 20:33:08: CPU Fan: low ^C root@NAS:/mnt/Storage/Scripts #
I lost a drive this week: that's the second Seagate Ironwolf. May then October. I am waiting for the RMA.
Thanks
So, I wonder if there is some chance of a hardware issue or error.
- Please confirm that the Intel CPU fan you are using is a four wire PWM fan. The script only works with PWM fans.
- Check the fan wiring again, and confirm that the CPU fan really is hooked up to the FAN 1 header.
- Carefully check the fan connector, and ensure that it is fully engaged on the pins on the FAN 1 header.