BUILD MB Supermicro X11SSM-F which RAM to use

[shad0wpl4y]

Hello,

I need some helping hand on deciding which RAM to grab for my system.
As MB I have decided that https://www.supermicro.com/products/motherboard/Xeon/C236_C232/X11SSM-F.cfm suits my needs with an I3-6300.

On the RAM side I do not have the knowhow to understand which ram is needed for maximum ZFS safety and what the difference is. I think I need 1.2V UDIMM ECC
So here are 2 links to possible contenders:

• Hynix: https://www.skhynix.com/products.view.do?vseq=1892&cseq=75
• Kingston: http://www.kingston.com/datasheets/KVR24R17S8_8MA.pdf

In the description with the Kingston 2 lines are added:
· Write CRC is supported at all speed grades
· CA parity (Command/Address Parity) mode is supported

Is this a feature I need? Or is the Hynix sufficient.

Update 01: The Hynix wont be ideal ... it is 64 bit instead of the required 72 bit

Thank you for the aid.

/Shad0wpl4y

 

[Dice]

Best is to use modules approved by the QVL:
https://www.supermicro.com/support/resources/mem.cfm

Most on the forum tend to use Samsung or Crucial sticks.

 

[shad0wpl4y]

Thanks for the link... but none of these are for sale in my country. The description of the recommended RAM matches the Hynix RAM I linked, do that is a partly confirmation although it does not explain the 2 extra info lines.
· Write CRC is supported at all speed grades
· CA parity (Command/Address Parity) mode is supported

 

[Dice]

although it does not explain the 2 extra info lines.
· Write CRC is supported at all speed grades
· CA parity (Command/Address Parity) mode is supporte

Never seen anyone ask about this in the forum.. I don't think it is something to worry about.

 

[Jailer]

If it's listed on the QVL and you can find it for a decent price then buy it.