Memory Problems with Supermicro X11SSM-F

[Wickblau]

Hi guys,

I'm new to the FreeNAS community, but I decided to build my own system using a Supermicro X11SSM-F board with an Intel Pentium G4560 for datastorage. I checked the Supermicro Homepage for supported RAM and decided to go for a Samsung 16Gb M391A2K43BB1-CPB stick which is mentioned there. However, when booting the system the board produces the error memory beeps (5x short, 1x long). When connection a monitor following error is shown:
0x0C=mrcMiscTrainingError

I already tried all four memory slots, but that didn't help. I also searched the web for a while, but could find any useful information. Does anybody of you have an idea what could be the problem?

Thanks!

 

[LimeCrusher]

Hey, weird. Have you checked in the motherboard documentation for the exact meaning of this sequence of beeps ?
The motherboard, CPU and RAM should be perfectly compatible. It worries me a bit cause I was thinking about a similar configuration.

 

[Ericloewe]

Check for bent pins on the CPU socket, too.

 

[DrKK]

If you read this:

https://h30434.www3.hp.com/t5/Busin...-Memory-Training-error-code-3016/td-p/5847857

which seems very similar, regarding mysterious memory training problems:

You will see that this is almost certainly memory timings being thrown off by a bent pin (possibly on CPU), or chipped surface mount component.