tbrezniak
Dabbler
- Joined
- Oct 8, 2014
- Messages
- 49
Code:
Enter an option from 1-14: 1 1) em0 Select an interface (q to quit): 1 Delete existing config? (y/n) n Configure interface for DHCP? (y/n) n Configure IPv4? (y/n) y Interface name: (press enter as can be blank) Several input formats are supported Example 1 CIDR Notation: 192.168.1.1/24 Example 2 IP and Netmask separate: IP: 192.168.1.1 Netmask: 255.255.255.0, or /24 or 24 IPv4 Address: 192.168.2.100/24 Saving interface configuration: Ok Configure IPv6? (y/n) n Restarting network: ok You may try the following URLs to access the web user interface: http://192.168.2.100 http://192.168.2.14
After going through step 1 on the startup screen of a fresh 9.3.1 build I am unable to access the web gui through the static ip I set as 192.168.2.100. It seems to be giving me 192.168.2.14 as an option as well as 192.168.2.100. Do I need to delete the 192.168.2.14 option?
I also setup the global config with an IP4 gateway and nameserver 1 shown in the static 1 photo. I got that info from running ipconfig in the command prompt, that output is in the picture static 3. Lastly I setup a static route with the destination network as 192.168.2.100/24, gateway as 192.168.2.1 seen in static 2 picture. I am not sure what I have missed, any help would be appreciate?
Hardware
Motherboard:
Supermicro X10SLL-F Micro ATX LGA1150 Motherboard , ECC support 32 GB max 1600 ram
Memory:
Crucial 16GB (2 x 8GB) DDR3-1866 CT2K8G3W186DM, ECC unregistered
HDDs - RAIDZ2 pool: MEdia pool for movies and TV shows
6x WD Green WD20EZRX, 2TB- SATA 6 GB/S 5400rpm
HDDs- mirror pool: backup of local pcs
2x WD RED WD20EFRX, 2TB - SATA6 GB/s 5400rpm
Boot Drive:
1x Sandisk 16gb USB drive
CPU:
Intel Pentium G3258 BX80646G3258, 3.2GHz Dual-Core Processor
Case:
NZXT Source 210 S210-001
Raid Card:
IBM SERVERAID M1015 Flashed to LSI IT mode
Power Supply:
EVGA 220-G2-0550-Y1 G2 80 Plus Gold Rated 550W