HDD failing?

[mateusscheper]

Hi. I have 1 HD 500GB with FreeNAS-11.2-U2 installed and 3 HD with 1TB each used on a jail. Recently, I noticed that my jail was VERY slow (simple commands like df -h took ages to output) then I rebooted my machine to see if I could find any errors. When it began to boot, I saw a lot of ATA STATUS: 51 (DRDY SERV ERR), ERROR: 84 (ICRC ABRT) on ata0, ata1, ata2 and ata3.
I ran smartctl to check for errors but now I'm even more confuse because it says SMART overall-health self-assessment test result: PASSED while above says
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
08 51 00 00 00 00 00 Error:

smartctl -a /dev/ada0:

Code:

smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Pipeline HD 5900.2
Device Model:     ST3500414CS
Serial Number:    6VVA8NAR
LU WWN Device Id: 5 000c50 037153589
Firmware Version: CA12
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5900 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Feb 27 17:20:08 2019 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  623) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off supp                                                                                        ort.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 112) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103b) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_                                                                                        FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   109   099   006    Pre-fail  Always       -                                                                                               22932057
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -                                                                                               0
  4 Start_Stop_Count        0x0032   081   081   020    Old_age   Always       -                                                                                               19533
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -                                                                                               0
  7 Seek_Error_Rate         0x000f   090   060   030    Pre-fail  Always       -                                                                                               1201468809
  9 Power_On_Hours          0x0032   054   054   000    Old_age   Always       -                                                                                               40896
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -                                                                                               0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -                                                                                               77
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -                                                                                               0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -                                                                                               0
188 Command_Timeout         0x0032   100   098   000    Old_age   Always       -                                                                                               68720525364
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -                                                                                               0
190 Airflow_Temperature_Cel 0x0022   063   052   045    Old_age   Always       -                                                                                               37 (Min/Max 34/41)
194 Temperature_Celsius     0x0022   037   048   000    Old_age   Always       -                                                                                               37 (0 19 0 0 0)
195 Hardware_ECC_Recovered  0x001a   031   029   000    Old_age   Always       -                                                                                               22932057
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -                                                                                               0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -                                                                                               0
199 UDMA_CRC_Error_Count    0x003e   200   198   000    Old_age   Always       -                                                                                               235

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA                                                                                        _of_first_error
# 1  Short offline       Completed without error       00%     40896         -
# 2  Short offline       Completed without error       00%     40895         -
# 3  Short offline       Completed without error       00%     40894         -
# 4  Short offline       Completed without error       00%     40893         -
# 5  Short offline       Completed without error       00%     40892         -
# 6  Short offline       Completed without error       00%     40891         -
# 7  Short offline       Completed without error       00%     40890         -
# 8  Short offline       Completed without error       00%     40889         -
# 9  Short offline       Completed without error       00%     40888         -
#10  Short offline       Completed without error       00%     40887         -
#11  Short offline       Completed without error       00%     40886         -
#12  Short offline       Completed without error       00%     40885         -
#13  Short offline       Completed without error       00%     40884         -
#14  Short offline       Completed without error       00%     40883         -
#15  Short offline       Completed without error       00%     40882         -
#16  Short offline       Completed without error       00%     40881         -
#17  Short offline       Completed without error       00%     40880         -
#18  Short offline       Completed without error       00%     40879         -
#19  Short offline       Completed without error       00%     40878         -
#20  Short offline       Completed without error       00%     40877         -
#21  Short offline       Completed without error       00%     40876         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

ada1 and ada2 are having the same errors and ada3 is offline for now, since I remove it for testing purposes.


Can anyone give me a little help?

Thank you very much.

 

[rvassar]

A properly configured pool should allow for one failed disk. But removing one for testing purposes when two others are throwing errors, is shooting yourself in the foot. Can you ssh in to the NAS and collect the "zpool status" output? Post it here using the "code" tags in editor tools bar.

 

[Chris Moore]

SMART overall-health self-assessment test result: PASSED

Always ignore that. It is totally meaningless.

 

[Chris Moore]

This line is significant:

Code:

199 UDMA_CRC_Error_Count    0x003e   200   198   000    Old_age   Always       -    235

That usually indicates a cabling problem.

Please reference this guidance and give us further hardware details:

Updated Forum Rules 12/5/18
https://forums.freenas.org/index.php?threads/updated-forum-rules-12-5-18.45124/

 

[mateusscheper]

Hi, sorry for the delay.
zpool status:

Code:

pool: backups
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
        still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
        the pool may no longer be accessible by software that does not support
        the features. See zpool-features(7) for details.
  scan: scrub in progress since Sun Feb 24 00:00:03 2019
        896G scanned at 203M/s, 718G issued at 6.25M/s, 2.05T total
        0 repaired, 34.12% done, no estimated completion time
config:

        NAME                                          STATE     READ WRITE CKSUM
        backups                                       ONLINE       0     0     0
          gptid/e607db7e-7bf1-11e8-8a7e-0019bb50896f  ONLINE       0     0     0
          gptid/e70aacbb-7bf1-11e8-8a7e-0019bb50896f  ONLINE       0     0     0
          gptid/1e2894e1-e1f8-11e8-86d9-0019bb50896f  ONLINE       0     0     0

errors: No known data errors

  pool: freenas-boot
state: ONLINE
  scan: scrub repaired 0 in 0 days 00:03:12 with 0 errors on Sat Feb 23 03:48:14 2019
config:

        NAME        STATE     READ WRITE CKSUM
        freenas-boot  ONLINE       0     0     0
          ada0p2    ONLINE       0     0     0

errors: No known data errors

Hardware:
I'm using an old Hp Proliant Ml110 G4 server.
CPU: Intel(R) Pentium(R) D CPU 3.00GHz;
Mem RAM: 5GB;
4 HDDs: 1 500GB for boot, 3x 1TB for data. No RAID;
1 NIC NetXtreme BCM5721 Gigabit Ethernet PCI Express;

It worked for months with this setup.

pciconf -lv:

Code:

hostb0@pci0:0:0:0:      class=0x060000 card=0x31f9103c chip=0x27788086 rev=0xc0 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'E7230/3000/3010 Memory Controller Hub'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:28:0:      class=0x060400 card=0x3206103c chip=0x27d08086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'NM10/ICH7 Family PCI Express Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:28:4:      class=0x060400 card=0x3206103c chip=0x27e08086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801GR/GH/GHM (ICH7 Family) PCI Express Port 5'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:28:5:      class=0x060400 card=0x3206103c chip=0x27e28086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801GR/GH/GHM (ICH7 Family) PCI Express Port 6'
    class      = bridge
    subclass   = PCI-PCI
uhci0@pci0:0:29:0:      class=0x0c0300 card=0x3206103c chip=0x27c88086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'NM10/ICH7 Family USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:29:1:      class=0x0c0300 card=0x3206103c chip=0x27c98086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'NM10/ICH7 Family USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci2@pci0:0:29:2:      class=0x0c0300 card=0x3206103c chip=0x27ca8086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'NM10/ICH7 Family USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci3@pci0:0:29:3:      class=0x0c0300 card=0x3206103c chip=0x27cb8086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'NM10/ICH7 Family USB UHCI Controller'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:29:7:      class=0x0c0320 card=0x3206103c chip=0x27cc8086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'NM10/ICH7 Family USB2 EHCI Controller'
    class      = serial bus
    subclass   = USB
pcib4@pci0:0:30:0:      class=0x060401 card=0x3206103c chip=0x244e8086 rev=0xe1 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:      class=0x060100 card=0x3206103c chip=0x27b88086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801GB/GR (ICH7 Family) LPC Interface Bridge'
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:1:    class=0x01018a card=0x3206103c chip=0x27df8086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) IDE Controller'
    class      = mass storage
    subclass   = ATA
atapci1@pci0:0:31:2:    class=0x01018f card=0x3206103c chip=0x27c08086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'NM10/ICH7 Family SATA Controller [IDE mode]'
    class      = mass storage
    subclass   = ATA
vgapci0@pci0:3:0:0:     class=0x030000 card=0x31fa103c chip=0x0522102b rev=0x02 hdr=0x00
    vendor     = 'Matrox Electronics Systems Ltd.'
    device     = 'MGA G200e [Pilot] ServerEngines (SEP1)'
    class      = display
    subclass   = VGA
bge0@pci0:4:0:0:        class=0x020000 card=0x7032103c chip=0x165914e4 rev=0x21 hdr=0x00
    vendor     = 'Broadcom Limited'
    device     = 'NetXtreme BCM5721 Gigabit Ethernet PCI Express'
    class      = network
    subclass   = ethernet

dmidecode:

Code:

# dmidecode 3.1
Scanning /dev/mem for entry point.
SMBIOS 2.4 present.
48 structures occupying 1544 bytes.
Table at 0x000DC010.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
        Vendor: HP
        Version: O10
        Release Date: 04/14/2007
        Address: 0xF0000
        Runtime Size: 64 kB
        ROM Size: 1024 kB
        Characteristics:
                PCI is supported
                PNP is supported
                APM is supported
                BIOS is upgradeable
                BIOS shadowing is allowed
                ESCD support is available
                Boot from CD is supported
                Selectable boot is supported
                BIOS ROM is socketed
                EDD is supported
                Print screen service is supported (int 5h)
                8042 keyboard services are supported (int 9h)
                Serial services are supported (int 14h)
                CGA/mono video services are supported (int 10h)
                ACPI is supported
                USB legacy is supported
                BIOS boot specification is supported
                Function key-initiated network boot is supported

Handle 0x0001, DMI type 1, 27 bytes
System Information
        Manufacturer: HP
        Product Name: ProLiant ML110 G4
        Version: 1.0
        Serial Number:
        UUID: 8079FB25-D21D-B211-8000-0019BB50896F
        Wake-up Type: Power Switch
        SKU Number: ................
        Family: ProLiant Server

Handle 0x0002, DMI type 2, 14 bytes
Base Board Information
        Manufacturer: HP
        Product Name: ML110 G4
        Version:
        Serial Number:
        Asset Tag:
        Features:
                Board is a hosting board
                Board is replaceable
        Location In Chassis: N/A
        Chassis Handle: 0x0003
        Type: Motherboard

Handle 0x0003, DMI type 3, 19 bytes
Chassis Information
        Manufacturer: HP
        Type: Tower
        Lock: Not Present
        Version: 1.0
        Serial Number:
        Asset Tag:
        Boot-up State: Safe
        Power Supply State: Safe
        Thermal State: Safe
        Security Status: None
        OEM Information: 0x00000105
        Height: Unspecified
        Number Of Power Cords: 1

Handle 0x0004, DMI type 4, 35 bytes
Processor Information
        Socket Designation: PROCESSOR
        Type: Central Processor
        Family: Other
        Manufacturer: Intel
        ID: 65 0F 00 00 FF FB EB BF
        Signature: Type 0, Family 15, Model 6, Stepping 5
        Flags:
                FPU (Floating-point unit on-chip)
                VME (Virtual mode extension)
                DE (Debugging extension)
                PSE (Page size extension)
                TSC (Time stamp counter)
                MSR (Model specific registers)
                PAE (Physical address extension)
                MCE (Machine check exception)
                CX8 (CMPXCHG8 instruction supported)
                APIC (On-chip APIC hardware supported)
                SEP (Fast system call)
                MTRR (Memory type range registers)
                PGE (Page global enable)
                MCA (Machine check architecture)
                CMOV (Conditional move instruction supported)
                PAT (Page attribute table)
                PSE-36 (36-bit page size extension)
                CLFSH (CLFLUSH instruction supported)
                DS (Debug store)
                ACPI (ACPI supported)
                MMX (MMX technology supported)
                FXSR (FXSAVE and FXSTOR instructions supported)
                SSE (Streaming SIMD extensions)
                SSE2 (Streaming SIMD extensions 2)
                SS (Self-snoop)
                HTT (Multi-threading)
                TM (Thermal monitor supported)
                PBE (Pending break enabled)
        Version: Intel(R) Pentium(R) D CPU 3.00GHz
        Voltage: 1.2 V
        External Clock: 800 MHz
        Max Speed: 4000 MHz
        Current Speed: 3000 MHz
        Status: Populated, Enabled
        Upgrade: Other
        L1 Cache Handle: 0x0005
        L2 Cache Handle: 0x0006
        L3 Cache Handle: 0x0007
        Serial Number: Not Specified
        Asset Tag: Not Specified
        Part Number: Not Specified

Handle 0x0005, DMI type 7, 19 bytes
Cache Information
        Socket Designation: L1-Cache
        Configuration: Enabled, Not Socketed, Level 1
        Operational Mode: Write Back
        Location: Internal
        Installed Size: 32 kB
        Maximum Size: 32 kB
        Supported SRAM Types:
                Unknown
        Installed SRAM Type: Unknown
        Speed: Unknown
        Error Correction Type: Parity
        System Type: Data
        Associativity: 8-way Set-associative

Handle 0x0006, DMI type 7, 19 bytes
Cache Information
        Socket Designation: L2-Cache
        Configuration: Enabled, Not Socketed, Level 2
        Operational Mode: Write Back
        Location: Internal
        Installed Size: 4096 kB
        Maximum Size: 4096 kB
        Supported SRAM Types:
                Unknown
        Installed SRAM Type: Unknown
        Speed: Unknown
        Error Correction Type: Single-bit ECC
        System Type: Unified
        Associativity: 8-way Set-associative

Handle 0x0007, DMI type 7, 19 bytes
Cache Information
        Socket Designation: L3-Cache
        Configuration: Enabled, Not Socketed, Level 3
        Operational Mode: Write Back
        Location: Internal
        Installed Size: 0 kB
        Maximum Size: 0 kB
        Supported SRAM Types:
                Unknown
        Installed SRAM Type: Unknown
        Speed: Unknown
        Error Correction Type: Unknown
        System Type: Unknown
        Associativity: Unknown

Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: P53
        Internal Connector Type: None
        External Reference Designator: COM 1
        External Connector Type: DB-9 female
        Port Type: Serial Port 16550A Compatible

Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: P53
        Internal Connector Type: None
        External Reference Designator: COM 2
        External Connector Type: DB-9 female
        Port Type: Serial Port 16550A Compatible

Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J69
        Internal Connector Type: None
        External Reference Designator: Video
        External Connector Type: DB-15 male
        Port Type: Video Port

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J68KBD_MSE
        Internal Connector Type: None
        External Reference Designator: Keyboard
        External Connector Type: Circular DIN-8 male
        Port Type: Keyboard Port

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J68KBD_MSE
        Internal Connector Type: None
        External Reference Designator: PS/2 Mouse
        External Connector Type: Circular DIN-8 male
        Port Type: Mouse Port

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J9
        Internal Connector Type: None
        External Reference Designator: LAN
        External Connector Type: RJ-45
        Port Type: Network Port

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J9
        Internal Connector Type: None
        External Reference Designator: USB 1
        External Connector Type: Access Bus (USB)
        Port Type: USB

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J9
        Internal Connector Type: None
        External Reference Designator: USB 2
        External Connector Type: Access Bus (USB)
        Port Type: USB

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: INT1 USB J3
        Internal Connector Type: Access Bus (USB)
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: USB

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: INT2 USB J4
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: USB

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: FRNTUSB0 P24
        Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: USB

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: FRNTUSB1 P24
        Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: USB

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: IDE P23
        Internal Connector Type: On Board IDE
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: SATA1 P60
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: SATA2 P61
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: SATA3 P64
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: SATA4 P62
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: CPU FAN P70
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: CHFAN P8
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x001B, DMI type 9, 13 bytes
System Slot Information
        Designation: J21 Slot1 PCI
        Type: 32-bit PCI
        Current Usage: Available
        Length: Long
        ID: 1
        Characteristics:
                5.0 V is provided
                3.3 V is provided

Handle 0x001C, DMI type 9, 13 bytes
System Slot Information
        Designation: J20 Slot2 PCI
        Type: 32-bit PCI
        Current Usage: Available
        Length: Long
        ID: 2
        Characteristics:
                5.0 V is provided
                3.3 V is provided

Handle 0x001D, DMI type 9, 13 bytes
System Slot Information
        Designation: J33 Slot3 PCI-E X4
        Type: x4 PCI Express
        Current Usage: Available
        Length: Other
        ID: 3
        Characteristics:
                5.0 V is provided
                3.3 V is provided

Handle 0x001E, DMI type 9, 13 bytes
System Slot Information
        Designation: J32 Slot4 PCI-E X8
        Type: x8 PCI Express
        Current Usage: Available
        Length: Other
        ID: 4
        Characteristics:
                5.0 V is provided
                3.3 V is provided

Handle 0x001F, DMI type 13, 22 bytes
BIOS Language Information
        Language Description Format: Abbreviated
        Installable Languages: 1
                enUS
        Currently Installed Language: enUS

Handle 0x0020, DMI type 15, 29 bytes
System Event Log
        Area Length: 16 bytes
        Header Start Offset: 0x0000
        Header Length: 16 bytes
        Data Start Offset: 0x0010
        Access Method: General-purpose non-volatile data functions
        Access Address: 0x0000
        Status: Valid, Not Full
        Change Token: 0x00000002
        Header Format: Type 1
        Supported Log Type Descriptors: 3
        Descriptor 1: POST error
        Data Format 1: POST results bitmap
        Descriptor 2: Single-bit ECC memory error
        Data Format 2: Multiple-event
        Descriptor 3: Multi-bit ECC memory error
        Data Format 3: Multiple-event

Handle 0x0021, DMI type 16, 15 bytes
Physical Memory Array
        Location: System Board Or Motherboard
        Use: System Memory
        Error Correction Type: Single-bit ECC
        Maximum Capacity: 8 GB
        Error Information Handle: Not Provided
        Number Of Devices: 4

Handle 0x0022, DMI type 17, 27 bytes
Memory Device
        Array Handle: 0x0021
        Error Information Handle: No Error
        Total Width: 72 bits
        Data Width: 64 bits
        Size: 1024 MB
        Form Factor: DIMM
        Set: 1
        Locator: DIMM1
        Bank Locator:
        Type: DDR2
        Type Detail: Synchronous
        Speed: Unknown
        Manufacturer: 7F98000000000000
        Serial Number: 7C1C2518
        Asset Tag: Not Specified
        Part Number: 4B544331472D5544

Handle 0x0023, DMI type 17, 27 bytes
Memory Device
        Array Handle: 0x0021
        Error Information Handle: No Error
        Total Width: 72 bits
        Data Width: 64 bits
        Size: 2048 MB
        Form Factor: DIMM
        Set: 1
        Locator: DIMM2
        Bank Locator:
        Type: DDR2
        Type Detail: Synchronous
        Speed: Unknown
        Manufacturer: 7F98000000000000
        Serial Number: 517C2193
        Asset Tag: Not Specified
        Part Number: 2020202020202020

Handle 0x0024, DMI type 17, 27 bytes
Memory Device
        Array Handle: 0x0021
        Error Information Handle: No Error
        Total Width: 72 bits
        Data Width: 64 bits
        Size: 2048 MB
        Form Factor: DIMM
        Set: 1
        Locator: DIMM3
        Bank Locator:
        Type: DDR2
        Type Detail: Synchronous
        Speed: Unknown
        Manufacturer: 7F98000000000000
        Serial Number: 517C2193
        Asset Tag: Not Specified
        Part Number: 2020202020202020

Handle 0x0025, DMI type 17, 27 bytes
Memory Device
        Array Handle: 0x0021
        Error Information Handle: No Error
        Total Width: Unknown
        Data Width: Unknown
        Size: No Module Installed
        Form Factor: DIMM
        Set: 1
        Locator: DIMM4
        Bank Locator:
        Type: DDR2
        Type Detail: Synchronous
        Speed: Unknown
        Manufacturer:
        Serial Number:
        Asset Tag: Not Specified
        Part Number:

Handle 0x0026, DMI type 19, 15 bytes
Memory Array Mapped Address
        Starting Address: 0x00000000000
        Ending Address: 0x0013FFFFFFF
        Range Size: 5 GB
        Physical Array Handle: 0x0021
        Partition Width: 2

Handle 0x0027, DMI type 20, 19 bytes
Memory Device Mapped Address
        Starting Address: 0x00000000000
        Ending Address: 0x0003FFFFFFF
        Range Size: 1 GB
        Physical Device Handle: 0x0022
        Memory Array Mapped Address Handle: 0x0026
        Partition Row Position: 1

Handle 0x0028, DMI type 20, 19 bytes
Memory Device Mapped Address
        Starting Address: 0x00040000000
        Ending Address: 0x000BFFFFFFF
        Range Size: 2 GB
        Physical Device Handle: 0x0023
        Memory Array Mapped Address Handle: 0x0026
        Partition Row Position: 1

Handle 0x0029, DMI type 20, 19 bytes
Memory Device Mapped Address
        Starting Address: 0x000C0000000
        Ending Address: 0x0013FFFFFFF
        Range Size: 2 GB
        Physical Device Handle: 0x0024
        Memory Array Mapped Address Handle: 0x0026
        Partition Row Position: 1

Handle 0x002A, DMI type 20, 19 bytes
Memory Device Mapped Address
        Starting Address: 0x0013FFFFC00
        Ending Address: 0x0013FFFFFFF
        Range Size: 1 kB
        Physical Device Handle: 0x0025
        Memory Array Mapped Address Handle: 0x0026
        Partition Row Position: 1

Handle 0x002B, DMI type 32, 20 bytes
System Boot Information
        Status: No errors detected

Handle 0x002C, DMI type 38, 18 bytes
IPMI Device Information
        Interface Type: KCS (Keyboard Control Style)
        Specification Version: 2.0
        I2C Slave Address: 0x10
        NV Storage Device: Not Present
        Base Address: 0x0000000000000CA2 (I/O)
        Register Spacing: Successive Byte Boundaries

Handle 0x002D, DMI type 208, 5 bytes
OEM-specific Type
        Header and Data:
                D0 05 2D 00 00

Handle 0x002E, DMI type 209, 12 bytes
HP BIOS PXE NIC PCI and MAC Information
        NIC 1: PCI device 04:00.0, MAC address 00:19:BB:50:89:6F

Handle 0x002F, DMI type 127, 4 bytes
End Of Table

About the SATA cables, I already changed them. Maybe mobo is fauty?

 

[Chris Moore]

I suggest you get the data out of this system while you still can and spend some time figuring out what is wrong with the hardware because the CRC errors in the SMART results you had previously shared indicate a cable problem but the system, if I recall correctly, has a drive backplane.
It's not looking good.

 

[mateusscheper]

I suggest you get the data out of this system while you still can and spend some time figuring out what is wrong with the hardware because the CRC errors in the SMART results you had previously shared indicate a cable problem but the system, if I recall correctly, has a drive backplane.
It's not looking good.

Hmm I see. I'll run some more tests and figure what is causing this.
Thank you for your help.