SOLVED Fiber Cable selection

[Fastline]

Hello,

So, i'm looking for a Fiber patch cable, a couple of months ago, @danb35 suggested me uniboot cable. But I'm not sure which connector type and cable jacket i need to buy. Any insights would be very helpful.

Also, i heard about some polarity. Although, i know what does it mean, I'm not sure what it has to do with the Fiber here. Any info on this would be great.

Thanks

 

[Davvo]

Where do you need to plug them?

 

[Fastline]

Where do you need to plug them?

From my NAS having Intel X710 to the switch. SFP+, SR

The current area is bit compact for cabling so any suggestions would be great.

 

[Davvo]

Here is a DAC. If you want fiber I would try Mikrotik's.

 

[Fastline]

https://www.amazon.it/10Gtek%C2%AE-Compatibile-XDACBL1M-10GBASE-CU-Passivo/dp/B00UFOOQZG

Oh, this is DAC.

Want to go for Uniboot one. Like one you suggest back then. I'm just not sure what connector type (Flat Clip/Standard Clip) and cable jacket (PVC/LSZH/OFNP) should i choose during checkout.

 

[Davvo]

Oh, I have no clue then. Also, are you sure it was me who suggested you something this specific regarding fiber?

 

[danb35]

Neither the clip nor the jacket material will have any effect on your network. Beyond that, this really is a question for the vendor. My guess would be that "flat clip" would be usable in a more space-constrained environment than "standard clip." I'm pretty sure PVC would be the "standard" material if you don't need any special properties (like flame retardance for plenums and such). But really a question for the vendor in both cases.

 

[Fastline]

Oh, I have no clue then. Also, are you sure it was me who suggested you something this specific regarding fiber?

It was @danb35. Seems like he is already here ;)

 

[Fastline]

Neither the clip nor the jacket material will have any effect on your network.

Yes, that's for sure.

Beyond that, this really is a question for the vendor. My guess would be that "flat clip" would be usable in a more space-constrained environment than "standard clip."

I think the same due to its design. I'll check once more to make sure :)

I'm pretty sure PVC would be the "standard" material if you don't need any special properties (like flame retardance for plenums and such). But really a question for the vendor in both cases.

I think the standard PVC will do the job. xD

Thanks for all the help!