CRITICAL: date and time - Device: /dev/da* [SAT], unable to open ATA device

[SmoothRunnings]

Using FreeNAS 11.1-U6
Server: Dell R510 Perc H200, 64GB of RAM.

I upgraded my 14 x 500GB SATA drives to 14 x 1TB Dell Enterprise Plus - Seagate Constellation.2 SAS drives. Three of them are giving me the error:

CRITICAL: date and time - Device: /dev/da* [SAT], unable to open ATA device

I saw a recent thread were someone ran scrub on his drives which fixed the issue, I did this but I still have the critical alert for the same issue. When I do a zpool status in the shell it doesn't report any issues with my pool.

Does anyone have a working solution?

Thanks,

 

[kdragon75]

Seagate Constellation.2 SAS drives

unable to open ATA device

That's odd... Is something looking for one of your old drives? SAS drives are NOT ATA devices there SCSI.

Please post the actual error message and the output of zpool list -v in code tags.

 

[kdragon75]

Does anyone have a working solution?

Let's find the problem before we look for solutions.

 

[Chris Moore]

I upgraded my 14 x 500GB SATA drives to 14 x 1TB Dell Enterprise Plus - Seagate Constellation.2 SAS drives. Three of them are giving me the error:

What kind of pool layout do you have? Instead of us needing to ask 50 questions, you should look at this to see what you should always give, every time you post:
https://forums.freenas.org/index.php?threads/updated-forum-rules-8-3-16.45124/

 

[joeschmuck]

And post the exact hard drive models you have install, a brand alone is not good enough.

 

[Pointeo13]

Issue happened to me replacing my drives three at a time, what cleared it for me when it happened was rebooting the server. Not sure if it's the same issue you are having, but I just ignored it knowing that it clears at reboot.

https://forums.freenas.org/index.php?threads/drive-replacement-issue.69904/

 

[SmoothRunnings]

After rebooting the system the error went away.

Thanks,