Baenwort
Explorer
- Joined
- Feb 19, 2015
- Messages
- 93
I upgraded from FreeNAS-9.3-STABLE-201604150515 to 9.10 using the built in GUI by changing the train to 9.10-STABLE.
The system is a Lenovo TS140 with Intel(R) Core(TM) i3-4130 CPU and 24435MB (24GB) of ECC memory in four sticks. It has two WD RED 6TB hard drives in a mirror. The intention, and reason for 24GB of ram, is to add another pair of 6TB drives to form a stripped mirror when I can next score a pair for <$200 each.
Upon rebooting after the upgrade I got the following in a continuous loop:
and an email describing a problem with a controller that I don't have (all drives are connected directly to the MBs SATA headers)
I also have a Cyberpower UPS (model CP1500PFCLCD) that is no longer seen by the NAS and the UPS service will no longer turn on. It is connected via USB to port /dev/ugen0.5 which corresponds with the above.
However, when I unplug the UPS from the NAS the error message scrolling through the log does not stop. It just changes to:
As you can guess by the fact that it took me a week to reach the point of asking for help this has not stopped our ability to access CFS shares nor to use the Emby plugin that is running in a jail. However, I would like to restore the UPS service so that I can be assured that the NAS will turn off before the battery runs down.
My desire for cleanliness would also like to see the error message leave the log.
Will you help me Obi-wan?
The system is a Lenovo TS140 with Intel(R) Core(TM) i3-4130 CPU and 24435MB (24GB) of ECC memory in four sticks. It has two WD RED 6TB hard drives in a mirror. The intention, and reason for 24GB of ram, is to add another pair of 6TB drives to form a stripped mirror when I can next score a pair for <$200 each.
Upon rebooting after the upgrade I got the following in a continuous loop:
Code:
May 8 16:17:25 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:17:25 thing ugen0.5: <Unknown> at usbus0 (disconnected) May 8 16:17:25 thing uhub_reattach_port: could not allocate new device May 8 16:17:26 thing usb_alloc_device: set address 5 failed (USB_ERR_IOERROR, ignored) May 8 16:17:32 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:17:32 thing usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:17:37 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:17:38 thing usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:17:44 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:17:44 thing usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:17:50 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:17:51 thing usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:17:57 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:17:57 thing ugen0.5: <Unknown> at usbus0 (disconnected) May 8 16:17:57 thing uhub_reattach_port: could not allocate new device May 8 16:17:58 thing usb_alloc_device: set address 5 failed (USB_ERR_IOERROR, ignored) May 8 16:18:03 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:18:04 thing usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:18:09 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:18:10 thing usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:18:16 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:18:16 thing usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:18:22 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:18:23 thing usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:18:29 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:18:29 thing ugen0.5: <Unknown> at usbus0 (disconnected) May 8 16:18:29 thing uhub_reattach_port: could not allocate new device May 8 16:18:29 thing usb_alloc_device: set address 5 failed (USB_ERR_IOERROR, ignored)
and an email describing a problem with a controller that I don't have (all drives are connected directly to the MBs SATA headers)
Code:
Checking status of 3ware RAID controllers: Alarms (most recent first): ++++/var/log/3ware_raid_alarms.today 2016-05-03 03:01:00.401603070 -0500 @@ -0,0 +1 @@ + -- End of daily output --
I also have a Cyberpower UPS (model CP1500PFCLCD) that is no longer seen by the NAS and the UPS service will no longer turn on. It is connected via USB to port /dev/ugen0.5 which corresponds with the above.
However, when I unplug the UPS from the NAS the error message scrolling through the log does not stop. It just changes to:
Code:
May 8 16:39:10 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:39:10 thing ugen0.5: <Unknown> at usbus0 (disconnected) May 8 16:39:10 thing uhub_reattach_port: could not allocate new device May 8 16:39:10 thing usb_alloc_device: set address 5 failed (USB_ERR_IOERROR, ignored) May 8 16:39:16 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:39:16 thing usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:39:22 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:39:23 thing usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:39:28 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:39:29 thing usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:39:35 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:39:36 thing usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:39:41 thing usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT May 8 16:39:41 thing ugen0.5: <Unknown> at usbus0 (disconnected) May 8 16:39:41 thing uhub_reattach_port: could not allocate new device May 8 16:39:41 thing ugen0.2: <CP1500PFCLCD> at usbus0 (disconnected) May 8 16:39:42 thing usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored) May 8 16:39:47 thing usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT May 8 16:39:48 thing usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:39:54 thing usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT May 8 16:39:55 thing usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:40:00 thing usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT May 8 16:40:01 thing usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:40:06 thing usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT May 8 16:40:07 thing usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:40:13 thing usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT May 8 16:40:13 thing ugen0.2: <Unknown> at usbus0 (disconnected) May 8 16:40:13 thing uhub_reattach_port: could not allocate new device May 8 16:40:13 thing usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored) May 8 16:40:19 thing usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT May 8 16:40:19 thing usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:40:25 thing usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT May 8 16:40:26 thing usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:40:31 thing usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT May 8 16:40:32 thing usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:40:38 thing usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT May 8 16:40:38 thing usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:40:44 thing usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT May 8 16:40:44 thing ugen0.2: <Unknown> at usbus0 (disconnected) May 8 16:40:44 thing uhub_reattach_port: could not allocate new device May 8 16:40:44 thing usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored) May 8 16:40:49 thing usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT May 8 16:40:50 thing usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) May 8 16:40:55 thing usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT May 8 16:40:56 thing usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
As you can guess by the fact that it took me a week to reach the point of asking for help this has not stopped our ability to access CFS shares nor to use the Emby plugin that is running in a jail. However, I would like to restore the UPS service so that I can be assured that the NAS will turn off before the battery runs down.
My desire for cleanliness would also like to see the error message leave the log.
Will you help me Obi-wan?