J
jkh
Guest
Please read this before using FreeNAS Corral.
https://forums.freenas.org/index.php?threads/important-announcement-regarding-freenas-corral.53502/
**********
Please update using the FreeNAS-Corral-STABLE train or go to http://download.freenas.org/Corral/10.0.3 (or http://www.freenas.org/download/ - whichever you prefer). If you are on the FreeNAS-Corral-Nightlies update train, you will also get all of the changes in this update as the trains have, for the moment, been synchronized.
Note for those having (or reading about) concerns with USB boot device reliability: Due to https://bugs.freenas.org/issues/23029 which is a behavioral change between 9.10 and Corral (9.10 force-migrated all system datasets OFF your boot pool the minute you created the first additional pool; corral waits for you to do this manually with System->Preferences->System Dataset Pool), we are now adding a critical alert to warn users whenever their system dataset is on a USB pool, Since both 9.10 and 10 log to this dataset (9.10 actually logs a little more, in our measurements thus far) but again, this is mitigated in 9.10 by auto-migrating the user off, we recommend that everyone simply go to the system configuration and do this once in Corral. Unless the selected volume is then destroyed, the system dataset will remain off the USB device.
We have fixed a LOT of problems with this update, targeting all of the top issues identified with Corral so far. We obviously have more tickets to fix and more evolution to do, but this is a pretty solid build with am much better 9.10->Corral migrator, so if you jumped off for a bit and want to jump back on, this is a good time!
## FreeNAS Corral 10.0.3 Update series
Welcome to the third minor point release of FreeNAS Corral!
Updates of note in this release (culled from the usual array of resolved tickets).
* Migration fixes (If you were holding off from ugrading to Corral or rolled back to 9.10 for any of these reasons, please give this update a try and let us know)
* Migration of iSCSI shares from 9.10 to Corral fully works now!
* Migration of non-dataset (directory based) shares for nfs, afp, smb, and webdav was broken and is fixed in this update. So please retry the 9.x to Corral upgrade again.
* While migrating a passphraseless encrypted volume from 9.x to Corral, the auto-unlock feature post first/every boot is now migrated.
* Also fixed a few other 9->Corral migration tickets, so migration in general is much better and more robust now.
* If you had your webui bound to an ip (either you had this in 9.x or you did this on a fresh install), the webui would not come back up post a reboot (or post 9.x to Corral migration). This is now fixed.
* Active Directory ID mappings are now configurable in the CLI. New Active Directory configurations use same ID ranges as FreeNAS 9.10, thus are entirely compatible. Existing setups need manual adjustment using CLI.
Example, assumes that directory name is `my_ad`:
```account directoryservice directories my_ad properties idmap set rid_start=20000```
(20000 is the typical value of `rid_start` in FreeNAS 9.)
* Several important UI fixes for encrypted volumes management
* Fixes to Directory Services UI: Can modify search path, remove configuration
* VM VGA consoles now work with HTTPs and custom Web UI ports
* Automatic removal of expired snapshot is fixed
* Re-added netdata service for charting / viewing performance (see service CLI)
* Multiple issues related to NFSv4 and Kerberos have been fixed
* Issue with Web UI not starting after setting up custom bind IP addresses has been fixed
* Bug allowing Container ports to overlap with host ports (like 80!) has been fixed. This may explain some of the "hey, my GUI went away!" tickets.
* Fixed bug where updating docker containers broke them.
* Fixed NFS maproot / mapall UI regression
* Fixed GUI regression in creating LAGGs
* Fixed group creation UI
* Fixed some bugs in encrypted volume unlock UI
* Additional GUI seatbelts added to yell at people more before deleting things, and to make shutdown / reboot a little harder to do accidentally.
* Fixed file downloads with firefox
* Improved performance with firefox
Complete ChangeLog:
## Blocks Until Resolved
* 22038 Can't remove wheel group from additional groups
* 22273 Upgraded to Corral: iscsi share wasn't migrated
* 22860 Refactor users/groups selector
## Regression
* 22496 docker images tab alternates between two image sets
* 22544 NFS maproot and mapall user/group selector does not send "none" value to middleware
* 22897 Tried to add an IPv4 address to a VLAN interface. Javascript KABOOM
* 22930 Docker container update breaks it
* 23064 Many dashboard widgets no longer updating
* 23069 GUI: user create / modify - Submit button inoperant
## Critical
* 21785 save DB (config) fails in Firefox?
* 22114 upgrade the zentyal VM from version 4.2 to 5
* 22177 GUI doesn't open new user or group queries when entering the Users or Groups views
* 22244 VM disk device size shown as 0 after creating the device.
* 22253 Not possible to create 2 zvols in sequenze
* 22256 (debug) screen: save handling erratic
* 22338 VM disk being automatically resized to 0
* 22369 add vm disk without datastore gives infinite loading
* 22371 two other problems with topology disk
* 22400 Rogue Directory Service cannot be deleted
* 22405 Directory service alerts don't show up in the GUI
* 22417 Must refresh GUI (re-login) to unlock more than one encrypted volume
* 22462 Download key task does not complete
* 22538 Some services not waiting for network after update to FreeNAS-10.0.1
* 22558 FreeNAS Corral: nfsuserd: died or didn't start
* 22578 Unable to create groups due to missing filed in Web UI
* 22618 Can't set LDAP encryption to TLS (always ends up being NONE)
* 22648 check box for "Automatically Check for Updates" -> set on "checked" can't be saved.
* 22649 Fix readonly users/groups such that it doesn't break creating groups
* 22670 Port Option Missing in RSync Tas for SSH
* 22728 Make things that delete data or extra objects present an additional confirmation and fix data leak with deletion confirmation fields.
* 22779 Deleting iSCSI shares does not remove config entries in MongoDB
* 22918 default iscsi portal is not shown under portals in CLI
* 22935 Allocated ports table seat belt does NOT work :(
* 23008 Web interface processor use in Firefox
* 23037 FreeNAS-Corral-MASTER-201704030031 ISO installer won't, well, install
* 23048 Permissions are getting smashed somewhere during the pkg installation / re-mastering process
* 23059 Directory services search path selector is totally hork
* 23063 Interestingly enough, I reported this ticket from Corral GUI and it set See in to BETA2, I have RELEASE version
* 23073 FreeNAS-Corral-MASTER-201704040629 - unable to set/edit dateset/share ownership
## Expected
* 21038 ChangeLog field in Update UI does not render markdown
* 21814 Calendar > rsync fails with "mkdir "/None" failed"
* 22176 User home directory displays incorrectly in Users display
* 22243 Blank VGA console when trying to install Windows/CentOS/etc with UEFI boot loader
* 22419 Save button doesn't always work in Safari
* 22532 Remove file browser namespace from CLI
* 22570 Kerberos Realms UI Seems Very Broken
* 22685 10.0.0.2 installer doesn't recognize that Corral is already installed
* 22690 Corral U2 - Mirroring existing boot stops system from booting
* 22718 Stale guid in freenas 9.x database causes pool to be not imported during migration from 9.x to corral
* 22837 FreeNAS-Corral-MASTER-201703261749 syslog not being forwarded
* 22932 Disallow changes in the GUI for LOCKED volumes
* 22960 Encrypted volume master key save/restore does not do its job anymore
* 23085 Can't save changes to directory services search path
* 23099 Container update from GUI sends wrong value of Command field
## Important
* 21493 Re-Integrate Netdata Into FreeNAS
* 22239 9->10 Drive activity lights no longer working? (possibly sgpio issue?)
* 22251 Recycle bin is corrupt on folders within SMB datastore and directory share
* 22378 Invalid container name (u), only [a-zA-Z0-9][a-zA-Z0-9_.-]
* 22427 Entire system hangs after reboot. GUI and CLI alike
* 22510 Shares' JSON descriptor has the wrong ownership/permissions
* 22528 Encrypted actions do not update on locked/unlocked state change
* 22688 Unknown DHCP option 66, skipped
* 22689 SMB - AD member server. Corral changes winbind idmap range for RID backend. Appears to result in permissions problems
* 22865 authorized-keys-helper script adds 10 second delay to ssh login
* 22959 It's far too easy to shut down in the GUI
* 22990 HDDs recognized in boot log but unavailable for volume creation
* 22994 SSH login slow after update
* 23021 Searching for LDAP users using uid= in search base fails on some servers.
* 23102 Available docker networks are not displayed in the container create UI when 'docker host' value is 'default'
* 23104 set empty_password=yes
## Nice to have
* 13748 service/nfs/config is missing "Support>16 groups" property
* 22498 Time is wrong in autogenerated snapshot names
https://forums.freenas.org/index.php?threads/important-announcement-regarding-freenas-corral.53502/
**********
Please update using the FreeNAS-Corral-STABLE train or go to http://download.freenas.org/Corral/10.0.3 (or http://www.freenas.org/download/ - whichever you prefer). If you are on the FreeNAS-Corral-Nightlies update train, you will also get all of the changes in this update as the trains have, for the moment, been synchronized.
Note for those having (or reading about) concerns with USB boot device reliability: Due to https://bugs.freenas.org/issues/23029 which is a behavioral change between 9.10 and Corral (9.10 force-migrated all system datasets OFF your boot pool the minute you created the first additional pool; corral waits for you to do this manually with System->Preferences->System Dataset Pool), we are now adding a critical alert to warn users whenever their system dataset is on a USB pool, Since both 9.10 and 10 log to this dataset (9.10 actually logs a little more, in our measurements thus far) but again, this is mitigated in 9.10 by auto-migrating the user off, we recommend that everyone simply go to the system configuration and do this once in Corral. Unless the selected volume is then destroyed, the system dataset will remain off the USB device.
We have fixed a LOT of problems with this update, targeting all of the top issues identified with Corral so far. We obviously have more tickets to fix and more evolution to do, but this is a pretty solid build with am much better 9.10->Corral migrator, so if you jumped off for a bit and want to jump back on, this is a good time!
## FreeNAS Corral 10.0.3 Update series
Welcome to the third minor point release of FreeNAS Corral!
Updates of note in this release (culled from the usual array of resolved tickets).
* Migration fixes (If you were holding off from ugrading to Corral or rolled back to 9.10 for any of these reasons, please give this update a try and let us know)
* Migration of iSCSI shares from 9.10 to Corral fully works now!
* Migration of non-dataset (directory based) shares for nfs, afp, smb, and webdav was broken and is fixed in this update. So please retry the 9.x to Corral upgrade again.
* While migrating a passphraseless encrypted volume from 9.x to Corral, the auto-unlock feature post first/every boot is now migrated.
* Also fixed a few other 9->Corral migration tickets, so migration in general is much better and more robust now.
* If you had your webui bound to an ip (either you had this in 9.x or you did this on a fresh install), the webui would not come back up post a reboot (or post 9.x to Corral migration). This is now fixed.
* Active Directory ID mappings are now configurable in the CLI. New Active Directory configurations use same ID ranges as FreeNAS 9.10, thus are entirely compatible. Existing setups need manual adjustment using CLI.
Example, assumes that directory name is `my_ad`:
```account directoryservice directories my_ad properties idmap set rid_start=20000```
(20000 is the typical value of `rid_start` in FreeNAS 9.)
* Several important UI fixes for encrypted volumes management
* Fixes to Directory Services UI: Can modify search path, remove configuration
* VM VGA consoles now work with HTTPs and custom Web UI ports
* Automatic removal of expired snapshot is fixed
* Re-added netdata service for charting / viewing performance (see service CLI)
* Multiple issues related to NFSv4 and Kerberos have been fixed
* Issue with Web UI not starting after setting up custom bind IP addresses has been fixed
* Bug allowing Container ports to overlap with host ports (like 80!) has been fixed. This may explain some of the "hey, my GUI went away!" tickets.
* Fixed bug where updating docker containers broke them.
* Fixed NFS maproot / mapall UI regression
* Fixed GUI regression in creating LAGGs
* Fixed group creation UI
* Fixed some bugs in encrypted volume unlock UI
* Additional GUI seatbelts added to yell at people more before deleting things, and to make shutdown / reboot a little harder to do accidentally.
* Fixed file downloads with firefox
* Improved performance with firefox
Complete ChangeLog:
## Blocks Until Resolved
* 22038 Can't remove wheel group from additional groups
* 22273 Upgraded to Corral: iscsi share wasn't migrated
* 22860 Refactor users/groups selector
## Regression
* 22496 docker images tab alternates between two image sets
* 22544 NFS maproot and mapall user/group selector does not send "none" value to middleware
* 22897 Tried to add an IPv4 address to a VLAN interface. Javascript KABOOM
* 22930 Docker container update breaks it
* 23064 Many dashboard widgets no longer updating
* 23069 GUI: user create / modify - Submit button inoperant
## Critical
* 21785 save DB (config) fails in Firefox?
* 22114 upgrade the zentyal VM from version 4.2 to 5
* 22177 GUI doesn't open new user or group queries when entering the Users or Groups views
* 22244 VM disk device size shown as 0 after creating the device.
* 22253 Not possible to create 2 zvols in sequenze
* 22256 (debug) screen: save handling erratic
* 22338 VM disk being automatically resized to 0
* 22369 add vm disk without datastore gives infinite loading
* 22371 two other problems with topology disk
* 22400 Rogue Directory Service cannot be deleted
* 22405 Directory service alerts don't show up in the GUI
* 22417 Must refresh GUI (re-login) to unlock more than one encrypted volume
* 22462 Download key task does not complete
* 22538 Some services not waiting for network after update to FreeNAS-10.0.1
* 22558 FreeNAS Corral: nfsuserd: died or didn't start
* 22578 Unable to create groups due to missing filed in Web UI
* 22618 Can't set LDAP encryption to TLS (always ends up being NONE)
* 22648 check box for "Automatically Check for Updates" -> set on "checked" can't be saved.
* 22649 Fix readonly users/groups such that it doesn't break creating groups
* 22670 Port Option Missing in RSync Tas for SSH
* 22728 Make things that delete data or extra objects present an additional confirmation and fix data leak with deletion confirmation fields.
* 22779 Deleting iSCSI shares does not remove config entries in MongoDB
* 22918 default iscsi portal is not shown under portals in CLI
* 22935 Allocated ports table seat belt does NOT work :(
* 23008 Web interface processor use in Firefox
* 23037 FreeNAS-Corral-MASTER-201704030031 ISO installer won't, well, install
* 23048 Permissions are getting smashed somewhere during the pkg installation / re-mastering process
* 23059 Directory services search path selector is totally hork
* 23063 Interestingly enough, I reported this ticket from Corral GUI and it set See in to BETA2, I have RELEASE version
* 23073 FreeNAS-Corral-MASTER-201704040629 - unable to set/edit dateset/share ownership
## Expected
* 21038 ChangeLog field in Update UI does not render markdown
* 21814 Calendar > rsync fails with "mkdir "/None" failed"
* 22176 User home directory displays incorrectly in Users display
* 22243 Blank VGA console when trying to install Windows/CentOS/etc with UEFI boot loader
* 22419 Save button doesn't always work in Safari
* 22532 Remove file browser namespace from CLI
* 22570 Kerberos Realms UI Seems Very Broken
* 22685 10.0.0.2 installer doesn't recognize that Corral is already installed
* 22690 Corral U2 - Mirroring existing boot stops system from booting
* 22718 Stale guid in freenas 9.x database causes pool to be not imported during migration from 9.x to corral
* 22837 FreeNAS-Corral-MASTER-201703261749 syslog not being forwarded
* 22932 Disallow changes in the GUI for LOCKED volumes
* 22960 Encrypted volume master key save/restore does not do its job anymore
* 23085 Can't save changes to directory services search path
* 23099 Container update from GUI sends wrong value of Command field
## Important
* 21493 Re-Integrate Netdata Into FreeNAS
* 22239 9->10 Drive activity lights no longer working? (possibly sgpio issue?)
* 22251 Recycle bin is corrupt on folders within SMB datastore and directory share
* 22378 Invalid container name (u), only [a-zA-Z0-9][a-zA-Z0-9_.-]
* 22427 Entire system hangs after reboot. GUI and CLI alike
* 22510 Shares' JSON descriptor has the wrong ownership/permissions
* 22528 Encrypted actions do not update on locked/unlocked state change
* 22688 Unknown DHCP option 66, skipped
* 22689 SMB - AD member server. Corral changes winbind idmap range for RID backend. Appears to result in permissions problems
* 22865 authorized-keys-helper script adds 10 second delay to ssh login
* 22959 It's far too easy to shut down in the GUI
* 22990 HDDs recognized in boot log but unavailable for volume creation
* 22994 SSH login slow after update
* 23021 Searching for LDAP users using uid= in search base fails on some servers.
* 23102 Available docker networks are not displayed in the container create UI when 'docker host' value is 'default'
* 23104 set empty_password=yes
## Nice to have
* 13748 service/nfs/config is missing "Support>16 groups" property
* 22498 Time is wrong in autogenerated snapshot names
Last edited by a moderator: