eddie200112
Contributor
- Joined
- Mar 17, 2015
- Messages
- 190
So yesterday I received this error message near the start of a scrub.
Device: /dev/da5 [SAT], failed to read SMART Attribute Data
Device: /dev/da5 [SAT], Read SMART Error Log Failed
The volume Ravenrock (ZFS) state is DEGRADED: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state.
Device: /dev/da5 [SAT], not capable of SMART self-check
Device: /dev/da5 [SAT], Read SMART Self-Test Log Failed
I then found a troubleshooting guide
https://forums.freenas.org/index.ph...leshooting-guide-basic-common-failures.41026/
But I don't have any of the tell tale positive SMART failures so I don't know whats going on. Do I replace the drive anyway?
Ill upload the smart output here as well.
Device: /dev/da5 [SAT], failed to read SMART Attribute Data
Device: /dev/da5 [SAT], Read SMART Error Log Failed
The volume Ravenrock (ZFS) state is DEGRADED: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state.
Device: /dev/da5 [SAT], not capable of SMART self-check
Device: /dev/da5 [SAT], Read SMART Self-Test Log Failed
I then found a troubleshooting guide
https://forums.freenas.org/index.ph...leshooting-guide-basic-common-failures.41026/
But I don't have any of the tell tale positive SMART failures so I don't know whats going on. Do I replace the drive anyway?
Ill upload the smart output here as well.
Code:
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-RELEASE-p3 amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate NAS HDD Device Model: ST4000VN000-1H4168 Serial Number: Z303A1YA LU WWN Device Id: 5 000c50 07a985576 Firmware Version: SC46 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5900 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jun 3 00:59:13 2016 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 117) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 509) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 114 100 006 Pre-fail Always - 67666320 3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 23 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 076 060 030 Pre-fail Always - 45833380 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 9476 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 17 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 001 001 000 Old_age Always - 339 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 066 045 Old_age Always - 30 (Min/Max 20/34) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 15 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 23 194 Temperature_Celsius 0x0022 030 040 000 Old_age Always - 30 (0 17 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA _of_first_error # 1 Extended offline Completed without error 00% 9472 - # 2 Short offline Completed without error 00% 9429 - # 3 Short offline Completed without error 00% 9237 - # 4 Short offline Completed without error 00% 9045 - # 5 Short offline Completed without error 00% 8853 - # 6 Extended offline Completed without error 00% 8788 - # 7 Short offline Completed without error 00% 8685 - # 8 Short offline Completed without error 00% 8517 - # 9 Short offline Completed without error 00% 8325 - #10 Short offline Completed without error 00% 8133 - #11 Extended offline Completed without error 00% 8068 - #12 Short offline Completed without error 00% 7965 - #13 Short offline Completed without error 00% 7773 - #14 Short offline Completed without error 00% 7606 - #15 Short offline Completed without error 00% 7415 - #16 Extended offline Completed without error 00% 7327 - #17 Short offline Completed without error 00% 7223 - #18 Short offline Completed without error 00% 7103 - #19 Short offline Completed without error 00% 7007 - #20 Short offline Completed without error 00% 6911 - #21 Short offline Completed without error 00% 6719 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.