Wolfeman0101
Patron
- Joined
- Jun 14, 2012
- Messages
- 428
I got an email tonight saying this. Not sure what it means or how to fix it.
Code:
This email was generated by the smartd daemon running on: host name: nibbler.local DNS domain: [Unknown] NIS domain: The following warning/error was logged by the smartd daemon: Device: /dev/ada2, 1 Currently unreadable (pending) sectors For details see host's SYSLOG. You can also use the smartctl utility for further investigation. No additional email messages about this problem will be sent.
Code:
[root@nibbler] /etc# smartctl -q noserial -a /dev/ada2
smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (Adv. Format)
Device Model: WDC WD20EARX-00PASB0
Firmware Version: 51.0AB51
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Nov 18 21:11:34 2012 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (40860) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 394) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 175 164 021 Pre-fail Always - 6208
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 64
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3070
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 62
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 57
193 Load_Cycle_Count 0x0032 195 195 000 Old_age Always - 16579
194 Temperature_Celsius 0x0022 120 102 000 Old_age Always - 30
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 3065 1159076584
# 2 Short offline Completed: read failure 90% 3064 1159076584
# 3 Short offline Completed without error 00% 3048 -
# 4 Short offline Completed without error 00% 3026 -
# 5 Short offline Completed without error 00% 3002 -
# 6 Short offline Completed without error 00% 2978 -
# 7 Short offline Completed without error 00% 2954 -
# 8 Short offline Completed without error 00% 2930 -
# 9 Short offline Completed without error 00% 2907 -
#10 Short offline Completed without error 00% 2883 -
#11 Short offline Completed without error 00% 2859 -
#12 Short offline Completed without error 00% 2835 -
#13 Short offline Completed without error 00% 2811 -
#14 Short offline Completed without error 00% 2787 -
#15 Short offline Completed without error 00% 2769 -
#16 Short offline Completed without error 00% 2745 -
#17 Short offline Completed without error 00% 2721 -
#18 Short offline Completed without error 00% 2697 -
#19 Short offline Completed without error 00% 2673 -
#20 Short offline Completed without error 00% 2649 -
#21 Short offline Completed without error 00% 2577 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
