Good morning! I have been testing TrueNAS-SCALE-22.02-RC.1-2 this past weekend on a system that I did an in-place upgrade from Core 12.0-UP6. I had 2 iSCSI LUNS presented to my ESXi cluster using this user-defined claim rule:
After upgrading to SCALE, my devices would no longer connect to my ESXi hosts, and would present this error in the vmkernel.log:
I was able to get it to register if I remove the claim rule and create a new claim rule using VMW_SATP_DEFAULT_AA. I searched through the release notes, and couldn't find anything regarding ALUA and VMware support, but is this going to be introduced in later releases? Or will this be a paid/enterprise feature? Just wanted to make sure I wasn't doing something wrong.
Thanks for the help/guidance!
Code:
esxcli storage nmp satp rule add -s "VMW_SATP_ALUA" -V "TrueNAS" -M "iSCSI Disk" -P "VMW_PSP_RR" -O "iops=1" -e "TrueNAS iSCSI Claim Rule"
After upgrading to SCALE, my devices would no longer connect to my ESXi hosts, and would present this error in the vmkernel.log:
Code:
WARNING: NMP: nmp_SatpClaimPath:2193: SATP "VMW_SATP_ALUA" could not add path "vmhba66:C1:T1:L10" for device "Unregistered Device". Error Not supported WARNING: NMP: nmp_DeviceAlloc:2185: nmp_AddPathToDevice failed Not supported (195887136). WARNING: NMP: nmp_DeviceAlloc:2205: Could not allocate NMP device. WARNING: ScsiPath: 8604: Plugin 'NMP' had an error (Not supported) while claiming path 'vmhba66:C1:T1:L10'. Skipping the path. ScsiClaimrule: 2039: Plugin NMP specified by claimrule 65535 was not able to claim path vmhba66:C1:T1:L10: Busy
I was able to get it to register if I remove the claim rule and create a new claim rule using VMW_SATP_DEFAULT_AA. I searched through the release notes, and couldn't find anything regarding ALUA and VMware support, but is this going to be introduced in later releases? Or will this be a paid/enterprise feature? Just wanted to make sure I wasn't doing something wrong.
Thanks for the help/guidance!