MediJaster
Dabbler
- Joined
- Feb 21, 2022
- Messages
- 10
Hello everyone,
This morning I decided to upgrade from CORE to SCALE, and everything went pretty smoothly, the SMB shares and ACLs ported over with no issues (Seriously, great work iXsystems). Then I got to installing applications, and there were no available applications, so I checked the task manager and then a notification arrived that read
I then turned over to my trusty shell inside the gui and tried to ping github.com to then be greeted by the infamous "unknown host" error, so I went to github.com from my computer and it worked fine so I'm assuming it's a networking settings issue but I don't know what to check.
Thanks to everyone for taking the time to read this, really looking forward to any suggestions you might have.
OS: TrueNAS-SCALE-22.02.0
Motherboard: JINGSHA DUAL CPU X79
CPU: 2 x Intel Xeon E5 2650 V2
RAM: 2 x 32GB 1866 MHz DDR3 ECC
HDDs: 6 x 4TB SATA 3.5" 7200rpm -- RaidZ2
Network: 2 x 1000/100/10 Realtek NIC integrated in the motherboard
This morning I decided to upgrade from CORE to SCALE, and everything went pretty smoothly, the SMB shares and ACLs ported over with no issues (Seriously, great work iXsystems). Then I got to installing applications, and there were no available applications, so I checked the task manager and then a notification arrived that read
Failed to sync OFFICIAL catalog: [EFAULT] Failed to clone 'https://github.com/truenas/charts.git' repository at '/mnt/MadeInHeaven/ix-applications/catalogs/github_com_truenas_charts_git_master' destination: Cmd('git') failed due to: exit code(128) cmdline: git clone -v https://github.com/truenas/charts.git /mnt/MadeInHeaven/ix-applications/catalogs/github_com_truenas_charts_git_master stderr: 'Cloning into '/mnt/MadeInHeaven/ix-applications/catalogs/github_com_truenas_charts_git_master'... fatal: unable to access 'https://github.com/truenas/charts.git/': Could not resolve host: github.com '
I then turned over to my trusty shell inside the gui and tried to ping github.com to then be greeted by the infamous "unknown host" error, so I went to github.com from my computer and it worked fine so I'm assuming it's a networking settings issue but I don't know what to check.
Thanks to everyone for taking the time to read this, really looking forward to any suggestions you might have.
OS: TrueNAS-SCALE-22.02.0
Motherboard: JINGSHA DUAL CPU X79
CPU: 2 x Intel Xeon E5 2650 V2
RAM: 2 x 32GB 1866 MHz DDR3 ECC
HDDs: 6 x 4TB SATA 3.5" 7200rpm -- RaidZ2
Network: 2 x 1000/100/10 Realtek NIC integrated in the motherboard