Hi,
First of all, I should say I am new to FreeNas and *nix systems. So apologies if I've made some idiot mistake.
I have built a new NAS box with 6 drives in it. 2 are connected to the motherboard's SATA ports, and 4 are connected to a RocketRaid 2720 SGL via SAS.
FreeNas seems to b working well.
I ran some burn in tests on all 6 drives, and then tried to test the smart status of the drives over SSH with:
That worked fine for the two drives attached to the motherboard directly. For the RocketRaid drives, I get the following output:
All 6 drives are the same brand and model - WD Red 4TB.
The RocketRaid BIOS utility is the latest version, it is in JBOD mode and it shows SMART as enabled.
FreeNas shows all disks as Smart Enabled = true in the "View Disks" screen.
I should also mention that I was previously attempting this test on version 9.2.1.9, and I received a slightly different error message there:
I have google around for a solution, but haven't really found anything I can try. It seems like I could create or edit smartd.conf (I don't seem to have one in my etc folder at the moment), but I have no idea what to put in there.
Any suggestions gratefully received. Any help on specific commands would also be useful as I'm new to the OS.
Thanks!
First of all, I should say I am new to FreeNas and *nix systems. So apologies if I've made some idiot mistake.
I have built a new NAS box with 6 drives in it. 2 are connected to the motherboard's SATA ports, and 4 are connected to a RocketRaid 2720 SGL via SAS.
FreeNas seems to b working well.
I ran some burn in tests on all 6 drives, and then tried to test the smart status of the drives over SSH with:
Code:
smartctl -A /dev/daX
That worked fine for the two drives attached to the motherboard directly. For the RocketRaid drives, I get the following output:
Code:
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p5 amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: HPT Product: DISK 0_0 Revision: 4.00 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Logical block size: 512 bytes Device type: disk Local Time is: Thu Dec 11 14:18:18 2014 PST SMART support is: Unavailable - device lacks SMART capability. === START OF READ SMART DATA SECTION === Request Sense failed, [Input/output error] Error Counter logging not supported Device does not support Self Test logging
All 6 drives are the same brand and model - WD Red 4TB.
The RocketRaid BIOS utility is the latest version, it is in JBOD mode and it shows SMART as enabled.
FreeNas shows all disks as Smart Enabled = true in the "View Disks" screen.
I should also mention that I was previously attempting this test on version 9.2.1.9, and I received a slightly different error message there:
Code:
CAM Status: CCB request was invalid
I have google around for a solution, but haven't really found anything I can try. It seems like I could create or edit smartd.conf (I don't seem to have one in my etc folder at the moment), but I have no idea what to put in there.
Any suggestions gratefully received. Any help on specific commands would also be useful as I'm new to the OS.
Thanks!