SMART Error Codes?

[mikestecker]

Is there a good place for looking up SMART error codes? I tried searching the web for this particular code I saw on one of my drives but I cannot find it. Just curious if anyone has a good resource they use or if they could help diagnose my warning I received last night:

Code:

smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HGST
Product:              H7240AS60SUN4.0T
Revision:             A3A0
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Formatted with type 1 protection
8 bytes of protection information per logical block
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000cca0731e9058
Serial number:        001520EJU2HX        PEGJU2HX
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Thu Mar 26 20:30:45 2020 PDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: WARNING: ascq=0x97 [asc=b, ascq=97]

Current Drive Temperature:     55 C
Drive Trip Temperature:        85 C

Manufactured in week 20 of year 2015
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  87
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  894
Elements in grown defect list: 0

Vendor (Seagate Cache) information
  Blocks sent to initiator = 13107189665234944

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:    4328979      522         0   4329501     442806     275476.201           0
write:         0        0         0         0     225841     138620.132           0
verify:     3522        0         0      3522      33785        103.810           0

Non-medium error count:        0

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -   19464                 - [-   -    -]
# 2  Background long   Completed                   -   19384                 - [-   -    -]
# 3  Background short  Completed                   -   19296                 - [-   -    -]
# 4  Background long   Completed                   -   19152                 - [-   -    -]
# 5  Background short  Completed                   -   19140                 - [-   -    -]
# 6  Background short  Completed                   -   19140                 - [-   -    -]

Long (extended) Self-test duration: 37452 seconds [624.2 minutes]

 

[Redcoat]

Well, I'd go here https://en.wikipedia.org/wiki/S.M.A.R.T. for general information for starters.

Looking at your message, that looks like a report rather than a warning to me... I may be missing something but I don't see any actual error reported within what you posted,

 

[mikestecker]

Well, I'd go here https://en.wikipedia.org/wiki/S.M.A.R.T. for general information for starters.

Looking at your message, that looks like a report rather than a warning to me... I may be missing something but I don't see any actual error reported within what you posted,

Thanks for the link. Sorry, yes it was a warning message. I saw the Wikipedia before, but couldn't find the code displayed for me... I've been searching for ascq=0x97 everywhere but I can't find anything.

 

[Redcoat]

What's the complete error message?