So I followed jruehlig's excellent guide for setting up a Sickrage, Couchpotato, Transmission and Sabnzbd here:
https://www.jruehlig.com/wordpress/installation-configuration-of-freenas-plugins/
I deleted the jail and rebuilt it twice, I've double and triple checked the settings to make sure everything was done right. I had this working on a previous NAS build, but moved over to new hardware, and wanted to start from scratch to become more familiar with working with jails / plugins. Shame on me I suppose.
I can search for movies in Couchpotato with no issues, select one for download, and it's transferred to Sabnzbd just fine. It successfully downloads, but when it runs the post processing script, it fails. I've attached the output since it's quite long. Sickrage post process with no issues, so I know for the most part the script and permissions in the jail are configured correctly since I had to create a folder link between my jail and the NAS volumes. I've combed over the Couchpotato settings to ensure everything is set up as described in the guide.
Any help is appreciated, I've been banging my head against a wall on this for over a week.
Software Version: FreeNAS-9.10.2-U1 (86c7ef5)
Hardware Configuration:
Rosewill 12bay hot Swap Chassis
Dell Precision T5500 Motherboard
1x Intel Xeon E5507 @ 2.27Ghz
24GB DDR3 1333 ECC Ram\
LSI 9210-8i SAS SATA 8-port PCI-E 6Gb/s Controller Card (IT Mode)
6 3TB Hitachi NAS drives in RaidZ2 (My Main NAS)
2 2TB WD RE4 Mirrored Drives (Jails + System Dataset)
4 4TB WD RE4 Mirrored Pairs (ISCSI serving my VMware ESXI boxes)
Intel GB NIC supporting NAS + Jails
Intel Dual NIC supporting ISCSI (On a separate VLAN)
https://www.jruehlig.com/wordpress/installation-configuration-of-freenas-plugins/
I deleted the jail and rebuilt it twice, I've double and triple checked the settings to make sure everything was done right. I had this working on a previous NAS build, but moved over to new hardware, and wanted to start from scratch to become more familiar with working with jails / plugins. Shame on me I suppose.
I can search for movies in Couchpotato with no issues, select one for download, and it's transferred to Sabnzbd just fine. It successfully downloads, but when it runs the post processing script, it fails. I've attached the output since it's quite long. Sickrage post process with no issues, so I know for the most part the script and permissions in the jail are configured correctly since I had to create a folder link between my jail and the NAS volumes. I've combed over the Couchpotato settings to ensure everything is set up as described in the guide.
Any help is appreciated, I've been banging my head against a wall on this for over a week.
Software Version: FreeNAS-9.10.2-U1 (86c7ef5)
Hardware Configuration:
Rosewill 12bay hot Swap Chassis
Dell Precision T5500 Motherboard
1x Intel Xeon E5507 @ 2.27Ghz
24GB DDR3 1333 ECC Ram\
LSI 9210-8i SAS SATA 8-port PCI-E 6Gb/s Controller Card (IT Mode)
6 3TB Hitachi NAS drives in RaidZ2 (My Main NAS)
2 2TB WD RE4 Mirrored Drives (Jails + System Dataset)
4 4TB WD RE4 Mirrored Pairs (ISCSI serving my VMware ESXI boxes)
Intel GB NIC supporting NAS + Jails
Intel Dual NIC supporting ISCSI (On a separate VLAN)