I have two freenas servers (SVR1 and SVR2). I am trying to backup all the data from SVR1 to SVR2 using rsync. SVR1 is running freenas v9.2.1.9 and SVR2 is running v.9.3.
The rsync task on SVR2 is not running. When I looked at the error message on the monitor of SVR2, it says the following:
On SVR1 I created a rsync module the the following configurations:
- Module name: SVR1Backup
- Read only
- user: nobody group: nobody
- Path: /mnt/VOL1
On SVR2 I created a rsync task with the following configuration:
user: nobody
path: /mnt/VOL2/Backups
remote host: SVR1.local
Remote Module name: SVR1Backup
Direction: Pull
SVR1 Config:
Hotename: SVR2.local
Build: FreeNAS-9.2.1.9-RELEASE-x86 (2bbba09)
Platform: Intel(R) Pentium(R) 4 CPU 3.40GHz
Memory: 2017MB
Gigabit Ethernet 192.168.1.110
Hard drive: Seagate 3TB
SVR2 Config
Hotename: SVR2.local
Build: FreeNAS-9.3-STABLE-201501212031
Platform: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
Memory: 6052MB
Gigabit Ethernet 192.168.1.111
Hard drive: Seagate 3TB
I am unsure how to post the dmesg data from each server.
I know that I am able to connect to each server from another computer using CIFS share without any issues and am able to read/write to it.
The rsync task on SVR2 is not running. When I looked at the error message on the monitor of SVR2, it says the following:
Code:
Jan 28 21:19:10 SVR2 su: _secure_path: /nonexistent/.login_conf is not owned by uid 65534
On SVR1 I created a rsync module the the following configurations:
- Module name: SVR1Backup
- Read only
- user: nobody group: nobody
- Path: /mnt/VOL1
On SVR2 I created a rsync task with the following configuration:
user: nobody
path: /mnt/VOL2/Backups
remote host: SVR1.local
Remote Module name: SVR1Backup
Direction: Pull
SVR1 Config:
Hotename: SVR2.local
Build: FreeNAS-9.2.1.9-RELEASE-x86 (2bbba09)
Platform: Intel(R) Pentium(R) 4 CPU 3.40GHz
Memory: 2017MB
Gigabit Ethernet 192.168.1.110
Hard drive: Seagate 3TB
SVR2 Config
Hotename: SVR2.local
Build: FreeNAS-9.3-STABLE-201501212031
Platform: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
Memory: 6052MB
Gigabit Ethernet 192.168.1.111
Hard drive: Seagate 3TB
I am unsure how to post the dmesg data from each server.
I know that I am able to connect to each server from another computer using CIFS share without any issues and am able to read/write to it.
Last edited: