[Message Erreur]Cam status: ATA status Error

nydjo · Feb 15, 2015

Bonjour.
Je suis nul en FreeNAS-9.2.1.8-RELEASE-x64 (e625626)
mais j'avais réussi a faire ce que je voulais en suivant quelques tuto mais j' ai un peu oublié la moitié !

Suite a des plombs qui ont lâché
j' ai au démarrage sur le disque 2 et 4, des message d erreur qui commence par

Cam status: ATA status Error

Problème matériel ou logiciel ?

J'ai accès a freenas depuis un browser
tout mes plugins sont sur off
le sharing existe sur freenas mais pas dans windows

par contre mon TANK es en mode error !
http://gyazo.com/3a244f7af327d2d5a5ca73910f0ed2ae

Avant que je reboot plusieurs fois il n y avais pas d erreur mais une utilisation a 105%

j' ai 5 dd de 2 TO

j'ai fais un

camcontrol devlist

<ST32000542AS CC34> at scbus0 target 0 lun 0 (pass0,ada0)
<ST32000542AS CC34> at scbus1 target 0 lun 0 (pass1,ada1)
<ST2000DL001-9VT156 CC41> at scbus2 target 0 lun 0 (pass2,ada2)
<SAMSUNG HD204UI 1AQ10001> at scbus3 target 0 lun 0 (pass3,ada3)
<WDC WD20EADS-00S2B0 01.00A01> at scbus4 target 0 lun 0 (pass4,ada4)
< Patriot Memory PMAP> at scbus6 target 0 lun 0 (pass5,da0)
[root@freenas ~]#

Ce qui m'importe le plus et de ne pas perdre mes fichiers !!!

C'es grave docteur ?

il vous faut plus de renseignement ?

Merci de m'avoir lu

Bidule0hm · Feb 15, 2015

Peux-tu poster le résultat de la commande zpool status -v (entre les balises code /code ou via un pastebin) ? ça permettra déjà de savoir dans quel état est ta pool.

Peux-tu également poster la liste de ton matériel (carte-mère, CPU, RAM, alim, ...) ? merci.

nydjo · Feb 15, 2015

merci

[root@freenas ~]# zpool status -v
no pools available

intel pentium CPU G3420 @ 3.20 ghz
g-skill 8 gb de dd3 a 1333 MHZ
carte mere Asrock h67M-

et l alim et une antec earthwatt 430

Bidule0hm · Feb 15, 2015

Hum... il n'a même pas réussi à monter la pool, ce n'est pas bon signe.

Peux-tu aussi mettre les messages d'erreur complets ? ("Cam status: ATA status Error" ce n'est pas très précis...)

nydjo · Feb 15, 2015

(ada2:ahcich2:0:0:0): RES: 51 40 c0 92 69 00 18 00 00 00 00
(ada2:ahcich2:0:0:0): Retrying command
(ada2:ahcich2:0:0:0): READ_DMA48. ACB: 25 00 b0 92 69 40 18 00 00 00 18 00
(ada2:ahcich2:0:0:0): CAM status: ATA Status Error
(ada2:ahcich2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada2:ahcich2:0:0:0): RES: 51 40 c0 92 69 00 18 00 00 00 00
(ada2:ahcich2:0:0:0): Retrying command
(ada2:ahcich2:0:0:0): READ_DMA48. ACB: 25 00 b0 92 69 40 18 00 00 00 18 00
(ada2:ahcich2:0:0:0): CAM status: ATA Status Error
(ada2:ahcich2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada2:ahcich2:0:0:0): RES: 51 40 c0 92 69 00 18 00 00 00 00
(ada2:ahcich2:0:0:0): Retrying command
(ada2:ahcich2:0:0:0): READ_DMA48. ACB: 25 00 b0 92 69 40 18 00 00 00 18 00
(ada2:ahcich2:0:0:0): CAM status: ATA Status Error
(ada2:ahcich2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada2:ahcich2:0:0:0): RES: 51 40 c0 92 69 00 18 00 00 00 00
(ada2:ahcich2:0:0:0): Retrying command
(ada2:ahcich2:0:0:0): READ_DMA48. ACB: 25 00 b0 92 69 40 18 00 00 00 18 00
(ada2:ahcich2:0:0:0): CAM status: ATA Status Error
(ada2:ahcich2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada2:ahcich2:0:0:0): RES: 51 40 c0 92 69 00 18 00 00 00 00
(ada2:ahcich2:0:0:0): Error 5, Retries exhausted
(ada2:ahcich2:0:0:0): READ_DMA48. ACB: 25 00 b0 92 69 40 18 00 00 00 18 00
(ada2:ahcich2:0:0:0): CAM status: ATA Status Error
(ada2:ahcich2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada2:ahcich2:0:0:0): RES: 51 40 c0 92 69 00 18 00 00 00 00
(ada2:ahcich2:0:0:0): Retrying command
(ada2:ahcich2:0:0:0): READ_DMA48. ACB: 25 00 b0 92 69 40 18 00 00 00 18 00
(ada2:ahcich2:0:0:0): CAM status: ATA Status Error
(ada2:ahcich2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada2:ahcich2:0:0:0): RES: 51 40 c0 92 69 00 18 00 00 00 00
(ada2:ahcich2:0:0:0): Retrying command
(ada2:ahcich2:0:0:0): READ_DMA48. ACB: 25 00 b0 92 69 40 18 00 00 00 18 00
(ada2:ahcich2:0:0:0): CAM status: ATA Status Error
(ada2:ahcich2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada2:ahcich2:0:0:0): RES: 51 40 c0 92 69 00 18 00 00 00 00
(ada2:ahcich2:0:0:0): Retrying command
(ada2:ahcich2:0:0:0): READ_DMA48. ACB: 25 00 b0 92 69 40 18 00 00 00 18 00
(ada2:ahcich2:0:0:0): CAM status: ATA Status Error
(ada2:ahcich2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada2:ahcich2:0:0:0): RES: 51 40 c0 92 69 00 18 00 00 00 00
(ada2:ahcich2:0:0:0): Retrying command
(ada2:ahcich2:0:0:0): READ_DMA48. ACB: 25 00 b0 92 69 40 18 00 00 00 18 00
(ada2:ahcich2:0:0:0): CAM status: ATA Status Error
(ada2:ahcich2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada2:ahcich2:0:0:0): RES: 51 40 c0 92 69 00 18 00 00 00 00
(ada2:ahcich2:0:0:0): Error 5, Retries exhausted
vboxdrv: fAsync=0 offMin=0x3c4 offMax=0xb90
pid 4358 (gpart), uid 0: exited on signal 11

il y as aussi des messages sur ada4

Bidule0hm · Feb 15, 2015

Comment ça ? tu copie-colle tout simplement ;)

nydjo · Feb 15, 2015

j ai trouver ca http://man7.org/linux/man-pages/man1/dmesg.1.html mais j'arrive pas a monter plus haut dans le shell (noob)

je peux pas copier coller le nas et pas sur ce pc

Bidule0hm · Feb 15, 2015

Ok, la RAM n'est pas ECC mais ce n'est pas lié au problème en principe.

Peux-tu poster le résultat de smartctl -a /dev/adaX (en remplaçant X par les chiffres de 0 à 4 afin d'avoir le résultat pour chaque disque)

Peux-tu également poster le résultat de gpart show et de gpart list ?

Tu peux aussi poster le résultat de dmesg si tu veux, ça ne peux pas faire de mal.

nydjo · Feb 15, 2015

quel support de fou tu me fais la ! Merci

Comme je dis j'arrive pas a tout voir dans le shell es a remonté

pour le dmesg c'es plus haut
disque0

Code:

SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 186074324
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 267
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 65864782
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4282
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 298
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 066 060 045 Old_age Always - 34 (Min/Max 31/34)
194 Temperature_Celsius 0x0022 034 040 000 Old_age Always - 34 (0 19 0 0 0)
195 Hardware_ECC_Recovered 0x001a 047 024 000 Old_age Always - 186074324
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 242897580462819
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3026329507
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1662694677

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

disque 1

Code:

SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 116 099 006 Pre-fail Always - 110614798
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 267
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 4361799371
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4294
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 340
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 064 060 045 Old_age Always - 36 (Min/Max 34/36)
194 Temperature_Celsius 0x0022 036 040 000 Old_age Always - 36 (0 22 0 0 0)
195 Hardware_ECC_Recovered 0x001a 041 020 000 Old_age Always - 110614798
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 115053583930097
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2604754718
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3908229618

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

disque2

Code:

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 18 ff ff ff 4f 00 00:55:52.531 READ DMA EXT
25 00 18 ff ff ff 4f 00 00:55:49.296 READ DMA EXT
35 00 10 ff ff ff 4f 00 00:55:49.295 WRITE DMA EXT
35 00 10 ff ff ff 4f 00 00:55:49.295 WRITE DMA EXT
ca 00 10 90 02 40 40 00 00:55:49.293 WRITE DMA

Error 562 occurred at disk power-on lifetime: 5817 hours (242 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 18 ff ff ff 4f 00 00:55:49.296 READ DMA EXT
35 00 10 ff ff ff 4f 00 00:55:49.295 WRITE DMA EXT
35 00 10 ff ff ff 4f 00 00:55:49.295 WRITE DMA EXT
ca 00 10 90 02 40 40 00 00:55:49.293 WRITE DMA
25 00 10 ff ff ff 4f 00 00:55:49.293 READ DMA EXT

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

disque3

Code:

194 Temperature_Celsius 0x0002 064 061 000 Old_age Always - 32 (Min/Max 15/39)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 14
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 2835

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3042 -
# 2 Short offline Completed without error 00% 3035 -
# 3 Short offline Completed without error 00% 3033 -
# 4 Short offline Completed without error 00% 3030 -
# 5 Short offline Completed without error 00% 3027 -
# 6 Extended offline Aborted by host 90% 3027 -
# 7 Short offline Completed without error 00% 3025 -
# 8 Short offline Completed without error 00% 3023 -
# 9 Short offline Completed without error 00% 3021 -
#10 Short offline Completed without error 00% 3018 -
#11 Short offline Completed without error 00% 3016 -
#12 Short offline Completed without error 00% 3014 -
#13 Extended offline Completed without error 00% 3012 -
#14 Short offline Aborted by host 90% 3007 -
#15 Short offline Completed without error 00% 3004 -
#16 Short offline Completed without error 00% 3001 -
#17 Short offline Completed without error 00% 2999 -
#18 Short offline Completed without error 00% 2996 -
#19 Short offline Completed without error 00% 2992 -
#20 Short offline Completed without error 00% 2989 -
#21 Extended offline Completed without error 00% 2987 -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

disque4

Code:

11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 146
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 136
193 Load_Cycle_Count 0x0032 193 193 000 Old_age Always - 23248
194 Temperature_Celsius 0x0022 109 099 000 Old_age Always - 43
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4196 -
# 2 Short offline Aborted by host 70% 4196 -
# 3 Short offline Completed without error 00% 4194 -
# 4 Short offline Completed without error 00% 4164 -
# 5 Extended offline Completed without error 00% 4123 -
# 6 Short offline Completed without error 00% 3997 -
# 7 Short offline Completed without error 00% 3830 -
# 8 Short offline Completed without error 00% 3662 -
# 9 Short offline Completed without error 00% 3495 -
#10 Extended offline Completed without error 00% 3382 -
#11 Short offline Completed without error 00% 3328 -
#12 Short offline Completed without error 00% 3161 -
#13 Short offline Completed without error 00% 2993 -
#14 Short offline Completed without error 00% 2941 -
#15 Short offline Completed without error 00% 2828 -
#16 Short offline Completed without error 00% 2660 -
#17 Extended offline Aborted by host 90% 2660 -
#18 Short offline Completed without error 00% 2494 -
#19 Short offline Completed without error 00% 2327 -
#20 Short offline Completed without error 00% 2159 -
#21 Short offline Completed without error 00% 2152 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
disque5
/dev/ada5: Unable to detect device type
Please specify device type with the -d option.

Use smartctl -h to get a usage summary


gpart show

#12 Short offline Completed without error 00% 3014 -
#13 Extended offline Completed without error 00% 3012 -
#14 Short offline Aborted by host 90% 3007 -
#15 Short offline Completed without error 00% 3004 -
#16 Short offline Completed without error 00% 3001 -
#17 Short offline Completed without error 00% 2999 -
#18 Short offline Completed without error 00% 2996 -
#19 Short offline Completed without error 00% 2992 -
#20 Short offline Completed without error 00% 2989 -
#21 Extended offline Completed without error 00% 2987 -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Code:

[root@freenas ~]# gpart show
=> 34 3907029101 ada0 GPT (1.8T)
34 94 - free - (47k)
128 4194304 1 freebsd-swap (2.0G)
4194432 3902834696 2 freebsd-zfs (1.8T)
3907029128 7 - free - (3.5k)

=> 34 3907029101 ada1 GPT (1.8T)
34 94 - free - (47k)
128 4194304 1 freebsd-swap (2.0G)
4194432 3902834696 2 freebsd-zfs (1.8T)
3907029128 7 - free - (3.5k)

=> 34 3907029101 ada2 GPT (1.8T)
34 94 - free - (47k)
128 4194304 1 freebsd-swap (2.0G)
4194432 3902834696 2 freebsd-zfs (1.8T)
3907029128 7 - free - (3.5k)

=> 34 3907029101 ada3 GPT (1.8T)
34 94 - free - (47k)
128 4194304 1 freebsd-swap (2.0G)
4194432 3902834696 2 freebsd-zfs (1.8T)
3907029128 7 - free - (3.5k)

Segmentation fault: 11

gpart list

Code:
Mediasize: 21159936 (20M) Sectorsize: 512 Stripesize: 0 Stripeoffset: 1978195968 Mode: r1w1e2 rawtype: 165 length: 21159936 offset: 1978195968 type: freebsd index: 4 end: 3904991 start: 3863664 Consumers: 1. Name: da0 Mediasize: 7743995904 (7.2G) Sectorsize: 512 Mode: r2w1e4 Geom name: da0s1 modified: false state: OK fwheads: 255 fwsectors: 63 last: 1930256 first: 0 entries: 8 scheme: BSD Providers: 1. Name: da0s1a Mediasize: 988283392 (942M) Sectorsize: 512 Stripesize: 0 Stripeoffset: 40448 Mode: r1w0e1 rawtype: 0 length: 988283392 offset: 8192 type: !0 index: 1 end: 1930256 start: 16 Consumers: 1. Name: da0s1 Mediasize: 988291584 (942M) Sectorsize: 512 Stripesize: 0 Stripeoffset: 32256 Mode: r1w0e1

j'ai ceci qui me parait louche

http://gyazo.com/20a8e8a179301eec0faa4db450025a38

105% d'un dd c'est étonnant

Bidule0hm · Feb 15, 2015

Waow, un segfault sur gpart show, impressionnant (et pas de bonne augure...).

Par contre le terminal de l'interface web est effectivement très limité. J'imagine que tu ne sais pas comment te SSH au serveur ?

Pour avoir la totalité de gpart list le plus simple est de le faire pour chaque disque, ça devrait rentrer dans le terminal, utilise gpart list adaX (pareil, X = 0 à 4).

Mais s'il te plait, utilise les balises code ou alors fais un/des pastebin (http://pastebin.com/) pour garder le formatage (ce qui serait génial serait que tu refasse les commandes smartctl en formatant correctement le résultat mais je peux comprendre si c'est trop embêtant), merci ;)

nydjo · Feb 15, 2015

non c pas embêtant du tout
je l ai fais pour chaque disque et ca rentre pas
je vais faire une recherche google sur le ssh et je post ca mais apres j irais au lit je serais back demain soir !

nydjo · Feb 15, 2015

Code:

[root@freenas ~]# gpart list ada0
Geom name: ada0
modified: false
state: OK
fwheads: 16
fwsectors: 63
last: 3907029134
first: 34
entries: 128
scheme: GPT
Providers:
1. Name: ada0p1
Mediasize: 2147483648 (2.0G)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 65536
Mode: r1w1e1
rawuuid: f06b46a1-546d-11e4-9ad6-bcee7b870dd5
rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
label: (null)
length: 2147483648
offset: 65536
type: freebsd-swap
index: 1
end: 4194431
start: 128
2. Name: ada0p2
Mediasize: 1998251364352 (1.8T)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 2147549184
Mode: r0w0e0
rawuuid: f0766277-546d-11e4-9ad6-bcee7b870dd5
rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
label: (null)
length: 1998251364352
offset: 2147549184
type: freebsd-zfs
index: 2
end: 3907029127
start: 4194432
Consumers:
1. Name: ada0
Mediasize: 2000398934016 (1.8T)
Sectorsize: 512
Mode: r1w1e2

Code:

[root@freenas ~]# gpart list ada1
Geom name: ada1
modified: false
state: OK
fwheads: 16
fwsectors: 63
last: 3907029134
first: 34
entries: 128
scheme: GPT
Providers:
1. Name: ada1p1
Mediasize: 2147483648 (2.0G)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 65536
Mode: r1w1e1
rawuuid: f0b28f5e-546d-11e4-9ad6-bcee7b870dd5
rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
label: (null)
length: 2147483648
offset: 65536
type: freebsd-swap
index: 1
end: 4194431
start: 128
2. Name: ada1p2
Mediasize: 1998251364352 (1.8T)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 2147549184
Mode: r0w0e0
rawuuid: f0bdb44b-546d-11e4-9ad6-bcee7b870dd5
rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
label: (null)
length: 1998251364352
offset: 2147549184
type: freebsd-zfs
index: 2
end: 3907029127
start: 4194432
Consumers:
1. Name: ada1
Mediasize: 2000398934016 (1.8T)
Sectorsize: 512
Mode: r1w1e2

Code:

[root@freenas ~]# gpart list ada2
Geom name: ada2
modified: false
state: OK
fwheads: 16
fwsectors: 63
last: 3907029134
first: 34
entries: 128
scheme: GPT
Providers:
1. Name: ada2p1
Mediasize: 2147483648 (2.0G)
Sectorsize: 512
Stripesize: 4096
Stripeoffset: 0
Mode: r1w1e1
rawuuid: f10ee815-546d-11e4-9ad6-bcee7b870dd5
rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
label: (null)
length: 2147483648
offset: 65536
type: freebsd-swap
index: 1
end: 4194431
start: 128
2. Name: ada2p2
Mediasize: 1998251364352 (1.8T)
Sectorsize: 512
Stripesize: 4096
Stripeoffset: 0
Mode: r0w0e0
rawuuid: f1233fbe-546d-11e4-9ad6-bcee7b870dd5
rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
label: (null)
length: 1998251364352
offset: 2147549184
type: freebsd-zfs
index: 2
end: 3907029127
start: 4194432
Consumers:
1. Name: ada2
Mediasize: 2000398934016 (1.8T)
Sectorsize: 512
Stripesize: 4096
Stripeoffset: 0
Mode: r1w1e2

Code:

[root@freenas ~]# gpart list ada3
Geom name: ada3
modified: false
state: OK
fwheads: 16
fwsectors: 63
last: 3907029134
first: 34
entries: 128
scheme: GPT
Providers:
1. Name: ada3p1
Mediasize: 2147483648 (2.0G)
Sectorsize: 512
Stripesize: 4096
Stripeoffset: 0
Mode: r1w1e1
rawuuid: f1a6fb51-546d-11e4-9ad6-bcee7b870dd5
rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
label: (null)
length: 2147483648
offset: 65536
type: freebsd-swap
index: 1
end: 4194431
start: 128
2. Name: ada3p2
Mediasize: 1998251364352 (1.8T)
Sectorsize: 512
Stripesize: 4096
Stripeoffset: 0
Mode: r0w0e0
rawuuid: f1b1bbff-546d-11e4-9ad6-bcee7b870dd5
rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
label: (null)
length: 1998251364352
offset: 2147549184
type: freebsd-zfs
index: 2
end: 3907029127
start: 4194432
Consumers:
1. Name: ada3
Mediasize: 2000398934016 (1.8T)
Sectorsize: 512
Stripesize: 4096
Stripeoffset: 0
Mode: r1w1e2

Code:

[root@freenas ~]# gpart list ada4
Geom name: ada4
Providers:
1. Name: ada4p1
Mediasize: 2147483648 (2.0G)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 65536
Mode: r1w1e1
Consumers:
1. Name: ada4
Mediasize: 2000398934016 (1.8T)
Sectorsize: 512
Mode: r1w1e2

[root@freenas ~]# gpart list ada4
Geom name: ada4
Providers:
1. Name: ada4p1
Mediasize: 2147483648 (2.0G)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 65536
Mode: r1w1e1
Consumers:
1. Name: ada4
Mediasize: 2000398934016 (1.8T)
Sectorsize: 512
Mode: r1w1e2

[root@freenas ~]# gpart list ada4
Geom name: ada4
Providers:
1. Name: ada4p1
Mediasize: 2147483648 (2.0G)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 65536
Mode: r1w1e1
Consumers:
1. Name: ada4
Mediasize: 2000398934016 (1.8T)
Sectorsize: 512
Mode: r1w1e2

Bidule0hm · Feb 15, 2015

C'est pas grave, poste déjà ce que tu as pour chaque disque.

Avant de te coucher tu peux lancer smartctl -t long /dev/adaX pour les disques 0 à 2 ? ils n'ont jamais été testés, seul les disques 3 et 4 l'ont été.

Ah aussi, tes disques étaient en RAID-Z1 ? RAID-Z2 ? autre ?

Edit: ada4 a l'air d'aller sérieusement mal...

nydjo · Feb 15, 2015

Code:

[root@freenas ~]# smartctl -t long /dev/ada0
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 447 minutes for test to complete.
Test will complete after Sun Feb 15 22:58:26 2015

Use smartctl -X to abort test.
[root@freenas ~]# smartctl -t long /dev/ada1
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 458 minutes for test to complete.
Test will complete after Sun Feb 15 23:10:11 2015

Use smartctl -X to abort test.
[root@freenas ~]# smartctl -t long /dev/ada0
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Can't start self-test without aborting current test (90% remaining),
add '-t force' option to override, or run 'smartctl -X' to abort test.

Code:

.
[root@freenas ~]# smartctl -t long /dev/ada1
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Can't start self-test without aborting current test (90% remaining),
add '-t force' option to override, or run 'smartctl -X' to abort test.

Code:

[root@freenas ~]# smartctl -t long /dev/ada2
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 345 minutes for test to complete.
Test will complete after Sun Feb 15 21:21:35 2015

Use smartctl -X to abort test.

Bidule0hm · Feb 15, 2015

Yep, désolé, j'ai copié collé et j'ai oublié de changer sdX en adaX, j'ai corrigé ;)

nydjo · Feb 15, 2015

c'es drole j' aurais penser que c'es le 2 qui allait mal !!! mais au pifométre

Pour le raid j' ai un gros doute !

je crois que j avais 4 disques au départ et j'ai acheter un 5 eme pour optimiser le zfs
il me semble que j'ai choisis la méthode que seul freenas utilise mais je trouve pas sur google et la je tombe de fatigue !

je te remercie je serais la demain soir pas avant mais je vais check avec mon smartphone !

j'ai éditer tous les codes !

A tout hasard pour le ssh:
mon freenas a une adresse ip fixe
dans le shell windows il y as pas une commande simple du style

$ ssh 192.168.1.40

Bidule0hm · Feb 15, 2015

Je n'ai pas encore regardé en détail (surtout sans formatage) mais pour moi c'est [au moins] ada4 le fautif.

Hum... je le sens vraiment pas le coup du "je crois que j avais 4 disques au départ et j'ai acheter un 5 eme pour optimiser le zfs" si t'as ajouté un cinquième disque en stripe t'as flingué toute la redondance. Après si tu l'as ajouté en cache (L2ARC ou SLOG) c'est pas un souci (mais par contre y'a zéro argument pour avoir mis un cache autre que la RAM, c'est vraiment pour des cas très particuliers qui sont généralement rencontrés que pour des gros serveurs dans des entreprises).

Edit: ah oui, mais rajouter les balises code ne fait pas revenir le formatage (malheureusement). Il faut refaire les commandes et les re-copier-coller. Pas besoin de tout refaire, ce qui' m'intéresse c'est surtout les smartctl -a /dev/adaX il faut de toute façon les refaire demain pour les disques qui n'ont jamais été testés.

nydjo · Feb 15, 2015

j ai installe avec 5 disques des le départ

et prends tout ton temps je suis pas presser

Bidule0hm · Feb 15, 2015

Ok, good ;) et t'avais choisis quelle option niveau RAID ?

nydjo · Feb 15, 2015

Code:

SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 186074324
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 267
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 65865119
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4284
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 298
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 064 060 045 Old_age Always - 36 (Min/Max 31/36)
194 Temperature_Celsius 0x0022 036 040 000 Old_age Always - 36 (0 19 0 0 0)
195 Hardware_ECC_Recovered 0x001a 043 024 000 Old_age Always - 186074324
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 225786430755557
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3026329507
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1662694677

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Self-test routine in progress 90% 4284 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Code:

SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 116 099 006 Pre-fail Always - 110614798
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 267
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 4361799757
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4295
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 340
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 062 060 045 Old_age Always - 38 (Min/Max 34/38)
194 Temperature_Celsius 0x0022 038 040 000 Old_age Always - 38 (0 22 0 0 0)
195 Hardware_ECC_Recovered 0x001a 038 020 000 Old_age Always - 110614798
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 232649788494579
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2604754718
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3908229618

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Self-test routine in progress 90% 4295 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Code:

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 18 ff ff ff 4f 00 00:55:52.531 READ DMA EXT
25 00 18 ff ff ff 4f 00 00:55:49.296 READ DMA EXT
35 00 10 ff ff ff 4f 00 00:55:49.295 WRITE DMA EXT
35 00 10 ff ff ff 4f 00 00:55:49.295 WRITE DMA EXT
ca 00 10 90 02 40 40 00 00:55:49.293 WRITE DMA

Error 562 occurred at disk power-on lifetime: 5817 hours (242 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 18 ff ff ff 4f 00 00:55:49.296 READ DMA EXT
35 00 10 ff ff ff 4f 00 00:55:49.295 WRITE DMA EXT
35 00 10 ff ff ff 4f 00 00:55:49.295 WRITE DMA EXT
ca 00 10 90 02 40 40 00 00:55:49.293 WRITE DMA
25 00 10 ff ff ff 4f 00 00:55:49.293 READ DMA EXT

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 5819 409572032
# 2 Extended offline Completed: read failure 90% 5819 409572032

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Code:

194 Temperature_Celsius 0x0002 064 061 000 Old_age Always - 33 (Min/Max 15/39)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 14
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 2835

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3042 -
# 2 Short offline Completed without error 00% 3035 -
# 3 Short offline Completed without error 00% 3033 -
# 4 Short offline Completed without error 00% 3030 -
# 5 Short offline Completed without error 00% 3027 -
# 6 Extended offline Aborted by host 90% 3027 -
# 7 Short offline Completed without error 00% 3025 -
# 8 Short offline Completed without error 00% 3023 -
# 9 Short offline Completed without error 00% 3021 -
#10 Short offline Completed without error 00% 3018 -
#11 Short offline Completed without error 00% 3016 -
#12 Short offline Completed without error 00% 3014 -
#13 Extended offline Completed without error 00% 3012 -
#14 Short offline Aborted by host 90% 3007 -
#15 Short offline Completed without error 00% 3004 -
#16 Short offline Completed without error 00% 3001 -
#17 Short offline Completed without error 00% 2999 -
#18 Short offline Completed without error 00% 2996 -
#19 Short offline Completed without error 00% 2992 -
#20 Short offline Completed without error 00% 2989 -
#21 Extended offline Completed without error 00% 2987 -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Code:

11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 147
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 137
193 Load_Cycle_Count 0x0032 193 193 000 Old_age Always - 23256
194 Temperature_Celsius 0x0022 110 099 000 Old_age Always - 42
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4196 -
# 2 Short offline Aborted by host 70% 4196 -
# 3 Short offline Completed without error 00% 4194 -
# 4 Short offline Completed without error 00% 4164 -
# 5 Extended offline Completed without error 00% 4123 -
# 6 Short offline Completed without error 00% 3997 -
# 7 Short offline Completed without error 00% 3830 -
# 8 Short offline Completed without error 00% 3662 -
# 9 Short offline Completed without error 00% 3495 -
#10 Extended offline Completed without error 00% 3382 -
#11 Short offline Completed without error 00% 3328 -
#12 Short offline Completed without error 00% 3161 -
#13 Short offline Completed without error 00% 2993 -
#14 Short offline Completed without error 00% 2941 -
#15 Short offline Completed without error 00% 2828 -
#16 Short offline Completed without error 00% 2660 -
#17 Extended offline Aborted by host 90% 2660 -
#18 Short offline Completed without error 00% 2494 -
#19 Short offline Completed without error 00% 2327 -
#20 Short offline Completed without error 00% 2159 -
#21 Short offline Completed without error 00% 2152 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

j'ai clavier et écran sur mon nas si ca peut aider a faire un ssh !

Important Announcement for the TrueNAS Community.

[Message Erreur]Cam status: ATA status Error

Explorer

Server Electronics Sorcerer

Explorer

Server Electronics Sorcerer

Explorer

Server Electronics Sorcerer

Explorer

Server Electronics Sorcerer

Explorer

Server Electronics Sorcerer

Explorer

Explorer

Server Electronics Sorcerer

Explorer

Server Electronics Sorcerer

Explorer

Server Electronics Sorcerer

Explorer

Server Electronics Sorcerer

Explorer

Important Announcement for the TrueNAS Community.

Related topics on forums.truenas.com for thread: "[Message Erreur]Cam status: ATA status Error"

Similar threads