GPU pass through not detected

[lolitsjack]

Hello, I am trying to do a GPU pass through of a GTX 970 to a Windows 10 VM, but no PCI device can be found.

Any help or tutorials can be greatly apricated, or a link to one please.

I can post any diagnostic logs asked of me.
I have very high experience with PC building and trouble shooting.
Low to medium experience with VMs and server networking.

 

[Evertb1]

Please read the forum rules about reporting your hardware before you post a question. It's hardly possible to answer your question if the we don't know where we are dealing with.

 

[lolitsjack]

Motherboard make and model- ASUS P9X79 PRO
CPU make and model- Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz
RAM quantity- 32gb
Hard drivess- WD Red Plus 4TB NAS Hard Disk Drive - 5400 RPM Class SATA 6Gb/s, CMR, 64MB Cache, 3.5 Inch - WD40EFRX, quantity: 4, Raid 5.
Boot Drive- SAMSUNG 860 EVO Series 2.5" 1TB SATA III V-NAND 3-bit MLC Internal Solid State Drive (SSD) MZ-76E1T0B/AM
Hard disk controllers- None
Network cards- None
Version: TrueNAS-12.0-U3.1

 

[Evertb1]

While your hardware is not the most suitable for TrueNAS it should support PCI Passthru. The CPU has support for VT-d. Check if the BIOS on your motherboard has the "Intel Virtualization Tech" setting enabled. Though I never used PCI Passthru on TrueNAS (I run an ESXi server) I asume it has the same needs as other platforms when it comes to this technologie.