Hi,
FreeNAS was giving me an error today: "The boot volume state is ONLINE: One or more devices has experienced an error resulting in data corruption. Applications may be affected."
When I checked which files were affected (via zpool status -v) I got the following output:
As I just updated to U4 and my last backup was from U2 (although file size has been same for weeks; I didn't change the configuration for quite some time) to be on the saved side I restored a backup from /var/db/system/configs-.../FreeNAS-9.10.1-U2/ to /data/freenas-v1.db and restarted into U2.
But the system still gives me the error that /data/freenas-v1.db is corrupted.
Everything seems to be working fine, so I am not sure what to do about the error above. (I already ordered two new USB-drives and plan to replace the existing one with the two new ones mirrored.)
Do you have any suggestions on what to do?
Thank you very much!
FreeNAS was giving me an error today: "The boot volume state is ONLINE: One or more devices has experienced an error resulting in data corruption. Applications may be affected."
When I checked which files were affected (via zpool status -v) I got the following output:
Code:
pool: freenas-boot state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: http://illumos.org/msg/ZFS-8000-8A scan: scrub repaired 8K in 0h5m with 2 errors on Mon Dec 5 03:50:33 2016 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 da0p2 ONLINE 0 0 0 errors: Permanent errors have been detected in the following files: freenas-boot/ROOT/9.10.1-U4@2015-06-19-19:51:26:/usr/local/share/locale/vi/LC_MESSAGES/grub.mo freenas-boot/ROOT/9.10.1-U4@2015-12-13-13:31:32:/data/freenas-v1.db
As I just updated to U4 and my last backup was from U2 (although file size has been same for weeks; I didn't change the configuration for quite some time) to be on the saved side I restored a backup from /var/db/system/configs-.../FreeNAS-9.10.1-U2/ to /data/freenas-v1.db and restarted into U2.
But the system still gives me the error that /data/freenas-v1.db is corrupted.
Everything seems to be working fine, so I am not sure what to do about the error above. (I already ordered two new USB-drives and plan to replace the existing one with the two new ones mirrored.)
Do you have any suggestions on what to do?
Thank you very much!
Last edited by a moderator: