RandomTask
Dabbler
- Joined
- Jul 8, 2016
- Messages
- 11
I have a FreeNAS 9.2-RELEASE-p12 box that has stopped being able to see anything on the local network (let alone the internet at large).
This box has a static IP: 192.168.2.248.
It is directly connected to a router (192.168.2.1) via an ethernet cable.
The router is serving out IPs from 192.168.2.2 to 192.168.2.100 via DHCP. There are other devices with static IPs outside that range that have access to the network and internet via this router, they are unaffected.
Attempting to ping either the router or Google results in no packets being received:
I've gone through the automated setup to remove and re-add my interface "em0" but I still can't see anything on my local network or the internet.
Here's the contents of my /etc/resolv.conf:
and the contents of my /etc/rc.conf file:
The output from ifconfig:
Any help would be much appreciated! I'm typically a fairly decent Linux guy, but am slowly learning the nuances of BSD!
This box has a static IP: 192.168.2.248.
It is directly connected to a router (192.168.2.1) via an ethernet cable.
The router is serving out IPs from 192.168.2.2 to 192.168.2.100 via DHCP. There are other devices with static IPs outside that range that have access to the network and internet via this router, they are unaffected.
Attempting to ping either the router or Google results in no packets being received:
Code:
# ping -c 3 192.168.2.1 PING 192.168.2.1 (192.168.2.1): 56 data bytes --- 192.168.2.1 ping statistics --- 3 packets transmitted, 0 packets received, 100.0% packet loss # ping -c 3 www.google.ca #Obviously this will fail now, but the error is different ping: cannot resolve www.google.ca: Host name lookup failure
I've gone through the automated setup to remove and re-add my interface "em0" but I still can't see anything on my local network or the internet.
Here's the contents of my /etc/resolv.conf:
Code:
search local # Is this maybe the culprit? nameserver 192.168.2.1 # I added this just in case nameserver 8.8.8.8 nameserver 8.8.4.4
and the contents of my /etc/rc.conf file:
Code:
#!/bin/sh hostname="Hades" sshd_enable="YES" sendmail_enable="NONE" background_fsck="NO" fsck_y_enable="YES" synchronous_dhclient="YES" ntpd_enable="YES" ntpd_sync_on_start="YES" vmware_guest_vmblock_enable="YES" vmware_guest_vmhgfs_enable="YES" vmware_guest_vmmemctl_enable="YES" vmware_guest_vmxnet_enable="YES" vmware_guestd_enable="YES" syslogd_flags="-s -C" devfs_system_ruleset="usbrules" clear_tmp_X="NO" ataidle_enable="YES" geli_autodetach="NO" dumpdev="AUTO" dumpdir="/data/crash" ix_textdump_enable="YES" early_kld_list="geom_stripe geom_raid3 geom_raid5 geom_gate geom_multipath" kld_list="dtraceall if_cxgbe" pbid_enable="YES" dbus_enable="YES" mdnsd_enable="YES" watchdogd_enable="YES" performance_cpu_freq="HIGH" vboxnet_enable="YES" local_startup="/etc/ix.rc.d /usr/local/etc/rc.d" early_late_divider="*" nginx_enable="YES"
The output from ifconfig:
Code:
em0: flags=8943<UP,BROADCAST,RUNNING,PROMISE,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=42098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWTSO> ether 90:2b:34:56:3f:56 inet 192.168.2.248 net mask 0xffffff00 broadcast 192.168.2.255 nd6 options=9<PERFORMNUD,IFDISABLED> media: Ethernet autoselect status: no carrier alc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=c3198<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TS04,WOL_MCAST,WOL_MAGIC,VLAN_HWTSO,LINKSTATE> ether 90:2b:34:56:3f:46 nd6 options=9<PERFORMNUD,IFDISABLED> media: Ethernet autoselect (none) status: no carrier ipfw0: flags=8800<SIMPLEX,MULTICAST> metric 0 mtu 65536 nd6 options=9<PERFORMNUD,IFDISABLED> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scooped 0x6 inet 127.0.0.1 net mask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> bridge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 02:94:eb:53:ce:00 nd6 options=9<PERFORMNUD,IFDISABLED> id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 manage 20 holdcnt 6 proto stp maxaddr 2000 timeout 1200 root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 member: epair1a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 9 priority 128 path cost 2000 member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 8 priority 128 path cost 2000 member: em0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 1 priority 128 path cost 2000000 epair0a: flags=8942<BROADCAST,RUNNING,PROMISE,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:45:90:00:08:0a nd6 options=9<PERFORMNUD,IFDISABLED> media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>) status: active epair1a: flags=8942<BROADCAST,RUNNING,PROMISE,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:aa:ac:00:09:0a nd6 options=9<PERFORMNUD,IFDISABLED> media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>) status: active
Any help would be much appreciated! I'm typically a fairly decent Linux guy, but am slowly learning the nuances of BSD!
Last edited: