GUI network config reverted

[imanbakker]

I was changing some network changes (wanted to add a bridge) however when i clicked on revert, all my vlans and everything are dropped in th GUI.
luckily the actual config is still working (vlans, LACP and so on.)

is there a way to push the acutal config to the gui?

When i SSH into the box, luckily the actual config is still present, however i don't dare to reboot the machine now.

Code:

root@core:~ # ifconfig
em0: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
        ether 00:1f:29:61:c5:e2
        hwaddr 00:1f:29:61:c5:e2
        nd6 options=1<PERFORMNUD>
        media: Ethernet autoselect
        status: no carrier
em1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: member of lagg0
        options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 00:1f:29:61:c5:e3
        hwaddr 00:1f:29:61:c5:e3
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
em2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: member of lagg0
        options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 00:1f:29:61:c5:e3
        hwaddr 90:1b:0e:f7:92:33
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: lo
lagg0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: lagg0
        options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 00:1f:29:61:c5:e3
        inet 192.168.1.3 netmask 0xffffff00 broadcast 192.168.1.255
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet autoselect
        status: active
        groups: lagg
        laggproto lacp lagghash l2,l3,l4
        laggport: em1 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
        laggport: em2 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
vlan10: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=3<RXCSUM,TXCSUM>
        ether 00:1f:29:61:c5:e3
        inet 192.168.10.3 netmask 0xffffff00 broadcast 192.168.10.255
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet autoselect
        status: active
        vlan: 10 vlanpcp: 0 parent interface: lagg0
        groups: vlan
vlan100: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: DMZ
        options=3<RXCSUM,TXCSUM>
        ether 00:1f:29:61:c5:e3
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet autoselect
        status: active
        vlan: 100 vlanpcp: 0 parent interface: lagg0
        groups: vlan
vlan20: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: vlan20
        options=3<RXCSUM,TXCSUM>
        ether 00:1f:29:61:c5:e3
        inet 192.168.20.3 netmask 0xffffff00 broadcast 192.168.20.255
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet autoselect
        status: active
        vlan: 20 vlanpcp: 0 parent interface: lagg0
        groups: vlan
vlan30: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=1<RXCSUM>
        ether 00:1f:29:61:c5:e3
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet autoselect
        status: active
        vlan: 30 vlanpcp: 0 parent interface: lagg0
        groups: vlan
vlan60: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: vlan60
        options=3<RXCSUM,TXCSUM>
        ether 00:1f:29:61:c5:e3
        inet 192.168.60.3 netmask 0xffffff00 broadcast 192.168.60.255
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet autoselect
        status: active
        vlan: 60 vlanpcp: 0 parent interface: lagg0
        groups: vlan
bridge100: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 02:6f:ef:ea:ec:64
        nd6 options=9<PERFORMNUD,IFDISABLED>
        groups: bridge
        id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
        maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
        root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
        member: vlan20 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 8 priority 128 path cost 2000000
        member: vlan100 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 7 priority 128 path cost 55
bridge30: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: the bridge for the jails
        ether 02:6f:ef:ea:ec:1e
        nd6 options=9<PERFORMNUD,IFDISABLED>
        groups: bridge
        id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
        maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
        root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
        member: vnet0.3 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 15 priority 128 path cost 2000
        member: vlan30 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 9 priority 128 path cost 55
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 02:6f:ef:ea:ec:00
        nd6 options=1<PERFORMNUD>
        groups: bridge
        id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
        maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
        root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
vnet0.3: flags=8942<BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: associated with jail: qbittorent as nic: epair0b
        options=8<VLAN_MTU>
        ether 90:1b:0e:7d:6a:81
        hwaddr 02:1a:d0:00:0f:0a
        nd6 options=1<PERFORMNUD>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
        groups: epair

 

[imanbakker]

can anyone tell met if there should be network configuration in: /etc/rc.conf ?
currently there is nothing there regarding interfaces or vlans, i just wanna check if i can safely reboot the freenas server.

 

[imanbakker]

well i managed to reboot the machine but my entire network config was gonna, restored the basic functionality LACP, iSCSI and vlans. just need to check how it worked with the bridges for jails.

so all be carefull with reverting twice you might lose your entire config!