Error Getting Available Disk Space

Status
Not open for further replies.

ajrousek

Cadet
Joined
Mar 15, 2014
Messages
3
Hi All

I am running freenas version 9, I am getting an error when I import a volume "Error Getting Available Disk Space"

Please advise

Thank you
Anthony
 

krikboh

Patron
Joined
Sep 21, 2013
Messages
209
What is your hardware? You are not running your disks in a RAID configuration are you?
 

krikboh

Patron
Joined
Sep 21, 2013
Messages
209
I don't think the G31 chipset on that motherboard is supported by FreeBSD/FreeNAS. That board only supports up to 4 GB of non-ECC RAM and FreeNAS requires a minimum of 8 GB ECC RAM so it is not appropriate hardware anyway.
 

ajrousek

Cadet
Joined
Mar 15, 2014
Messages
3
ok, so after the import volume failed, I tried to setup hdd with UFS volume manager (legacy) and it seems to be working now, however I had to erase the hard drives, lucky I had data on a backup

Regards
Anthony
 

bjarni187

Cadet
Joined
Mar 23, 2014
Messages
1
Something similar happened to me. I am trying to import a volume that is formatted UFS and has worked on another FREENAS system. Unfortunately I don't have the config file to upload. The hard drives have data on them, so I don't want to lose it. When I import a volume, it works, but only shows 823.5 KiB of space for a 1.5TB hard drive. Is there anyway to reverse the import and try again? Or is there some way I could fix this? Thank you
 
Status
Not open for further replies.
Top