The volume (ZFS) status is UNKNOWN after Upgrade to 8.3.0

[electro-sound]

Hello everybody,

I have the following Problem:

I have upgradet my freenas from 8.2.0 to 8.3.1 and after the reboot my volume is "defect"

That means:
- WARNING: The volume nas1 (ZFS) status is UNKNOWN

- View Volumes:
nas1 /mnt/nas1 0 (Error) Error getting available space Error getting total space UNKNOWN

- View Disks:
There is only 1 instead of 3 disks (but in the BIOS I can see all Disks)


Also my Linux skills are not good enough and I excuse for double threads if there are some.
Please help me I don't get lost my data the second time -.-

 

[electro-sound]

I solved the problem like the following way:

- for luck I have saved my config bevor the update
- so I installed the freenas 8.2.0 Release on a new USB Stick
- restored my old config

and all the volumes, data, disks are there and working very well.

 

[warri]

Maybe http://forums.freenas.org/showthrea...e-from-8-0-2-to-8-3&highlight=UNKNOWN+upgrade?

 

[cyberjock]

Warri- The thread you linked is because they were using the old zpool version(pre 8.3.0). This issue is probably the same as what http://forums.freenas.org/showthread.php?11925-FreeNAS-8-3-1-RELEASE&p=55091&viewfull=1#post55091 had. The only fix I believe was to go back to the old version. Something seems to be wrong with 8.3.1 for some people.

I'm going to mention this thread in the other thread and see if William has any ideas why this is happening.

 

[William Grzybowski]

Paste zpool status or zpool import

 

[electro-sound]

At the v8.3.1 as I paste "zpool status" I got the message that there are no zpools.

But now I can't test the other command because I'll back to v8.2.0