Hi all, I'm currently receiving some error messages in the gui for two disks:
I had a similar issue with one disk a month or so ago. I believe it was da1. After long tests and manual scrubbing came back clean, the error messages remained. I was able to clear the warnings by deleting /tmp/.smartalert file and rebooting. However this popped up again.
I'm currently running long smartctl tests on both disks. Nothing looks particularly out of order. I'm wondering if I'm misinterpreting the output or missing something here. Any advice would be greatly appreciated.
The pool appears healthy:
smartctl -a for /dev/da0
smartclt -a for /dev/da1
CRITICAL: Device: /dev/da0 [SAT], 8 Currently unreadable (pending) sectors
CRITICAL: Device: /dev/da0 [SAT], 8 Offline uncorrectable sectors
CRITICAL: Device: /dev/da0 [SAT], 64 Currently unreadable (pending) sectors
CRITICAL: Device: /dev/da0 [SAT], 64 Offline uncorrectable sectors
CRITICAL: Device: /dev/da1 [SAT], 8 Currently unreadable (pending) sectors
CRITICAL: Device: /dev/da1 [SAT], 8 Offline uncorrectable sectors
I had a similar issue with one disk a month or so ago. I believe it was da1. After long tests and manual scrubbing came back clean, the error messages remained. I was able to clear the warnings by deleting /tmp/.smartalert file and rebooting. However this popped up again.
I'm currently running long smartctl tests on both disks. Nothing looks particularly out of order. I'm wondering if I'm misinterpreting the output or missing something here. Any advice would be greatly appreciated.
The pool appears healthy:
Code:
~# zpool status pool: freenas-boot state: ONLINE scan: scrub repaired 0 in 0h4m with 0 errors on Tue May 10 03:49:11 2016 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 gptid/3a2db1b9-18df-11e5-bd82-ac220b50f777 ONLINE 0 0 0 errors: No known data errors pool: tank1 state: ONLINE scan: scrub repaired 0 in 12h58m with 0 errors on Sun Jun 5 12:58:09 2016 config: NAME STATE READ WRITE CKSUM tank1 ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 gptid/cad7d80d-1906-11e5-b8e2-ac220b50f777 ONLINE 0 0 0 gptid/cb95f722-1906-11e5-b8e2-ac220b50f777 ONLINE 0 0 0 gptid/cc44bf4f-1906-11e5-b8e2-ac220b50f777 ONLINE 0 0 0 gptid/669fd75c-2c0b-11e5-9209-ac220b50f777 ONLINE 0 0 0 gptid/cda92b39-1906-11e5-b8e2-ac220b50f777 ONLINE 0 0 0 gptid/ce717a98-1906-11e5-b8e2-ac220b50f777 ONLINE 0 0 0
smartctl -a for /dev/da0
Code:
~# smartctl -a -q noserial /dev/da0 smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p23 amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST3000DM001-1CH166 Firmware Version: CC27 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jun 14 11:11:41 2016 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline data collection: ( 584) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 320) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 223476760 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 83 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 194540065 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 19303 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 84 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 066 056 045 Old_age Always - 34 (Min/Max 28/36) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 83 193 Load_Cycle_Count 0x0032 065 065 000 Old_age Always - 70883 194 Temperature_Celsius 0x0022 034 044 000 Old_age Always - 34 (0 15 0 0 0) 197 Current_Pending_Sector 0x0012 100 099 000 Old_age Always - 16 198 Offline_Uncorrectable 0x0010 100 099 000 Old_age Offline - 16 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 18639h+34m+09.984s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 49934685866 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 176567283014 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Self-test routine in progress 70% 19303 - # 2 Short offline Completed without error 00% 19301 - # 3 Short offline Completed without error 00% 19267 - # 4 Short offline Completed without error 00% 19266 - # 5 Short offline Completed without error 00% 19265 - # 6 Short offline Completed without error 00% 19264 - # 7 Short offline Completed without error 00% 19263 - # 8 Short offline Completed without error 00% 19262 - # 9 Short offline Completed without error 00% 19261 - #10 Short offline Completed without error 00% 19260 - #11 Short offline Completed without error 00% 19259 - #12 Short offline Completed without error 00% 19258 - #13 Short offline Completed without error 00% 19257 - #14 Short offline Completed without error 00% 19256 - #15 Short offline Completed without error 00% 19255 - #16 Short offline Completed without error 00% 19254 - #17 Short offline Completed without error 00% 19253 - #18 Short offline Completed without error 00% 19252 - #19 Short offline Completed without error 00% 19251 - #20 Short offline Completed without error 00% 19250 - #21 Short offline Completed without error 00% 19249 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
smartclt -a for /dev/da1
Code:
~# smartctl -a -q noserial /dev/da1 smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p23 amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST3000DM001-1CH166 Firmware Version: CC27 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jun 14 11:13:48 2016 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline data collection: ( 584) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 319) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 116 099 006 Pre-fail Always - 113504200 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 83 5 Reallocated_Sector_Ct 0x0033 099 099 010 Pre-fail Always - 856 7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 206286575 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 19304 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 83 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 189 High_Fly_Writes 0x003a 096 096 000 Old_age Always - 4 190 Airflow_Temperature_Cel 0x0022 059 054 045 Old_age Always - 41 (Min/Max 33/44) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 83 193 Load_Cycle_Count 0x0032 067 067 000 Old_age Always - 67916 194 Temperature_Celsius 0x0022 041 046 000 Old_age Always - 41 (0 15 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 18647h+39m+03.104s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 49921365445 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 177148340102 SMART Error Log Version: 1 ATA Error Count: 2 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 occurred at disk power-on lifetime: 18728 hours (780 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 00 00 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d4 00 81 4f c2 00 00 24d+15:09:18.776 SMART EXECUTE OFF-LINE IMMEDIATE 61 00 18 ff ff ff 4f 00 24d+15:09:18.776 WRITE FPDMA QUEUED b0 d4 00 81 4f c2 00 00 24d+15:09:09.982 SMART EXECUTE OFF-LINE IMMEDIATE b0 d0 01 00 4f c2 00 00 24d+15:09:09.889 SMART READ DATA ec 00 01 00 00 00 00 00 24d+15:09:09.886 IDENTIFY DEVICE Error 1 occurred at disk power-on lifetime: 18728 hours (780 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 00 00 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d4 00 81 4f c2 00 00 24d+15:09:09.982 SMART EXECUTE OFF-LINE IMMEDIATE b0 d0 01 00 4f c2 00 00 24d+15:09:09.889 SMART READ DATA ec 00 01 00 00 00 00 00 24d+15:09:09.886 IDENTIFY DEVICE ec 00 01 00 00 00 00 00 24d+15:09:09.886 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 24d+15:09:09.885 IDENTIFY DEVICE SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Self-test routine in progress 70% 19304 - # 2 Short offline Completed without error 00% 19302 - # 3 Short offline Completed without error 00% 19268 - # 4 Short offline Completed without error 00% 19267 - # 5 Short offline Completed without error 00% 19266 - # 6 Short offline Completed without error 00% 19266 - # 7 Short offline Completed without error 00% 19264 - # 8 Short offline Completed without error 00% 19263 - # 9 Short offline Completed without error 00% 19262 - #10 Short offline Completed without error 00% 19261 - #11 Short offline Completed without error 00% 19260 - #12 Short offline Completed without error 00% 19259 - #13 Short offline Completed without error 00% 19258 - #14 Short offline Completed without error 00% 19257 - #15 Short offline Completed without error 00% 19256 - #16 Short offline Completed without error 00% 19255 - #17 Short offline Completed without error 00% 19254 - #18 Short offline Completed without error 00% 19253 - #19 Short offline Completed without error 00% 19252 - #20 Short offline Completed without error 00% 19251 - #21 Short offline Completed without error 00% 19250 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.