David Buchanan
Dabbler
- Joined
- Dec 19, 2014
- Messages
- 10
Hi All,
I'm looking for some advice to resolve my issue with what I believe is a faulty drive (maybe two) as I'm still learning Freenas.
A little info about my system:
CPU: Intel Xeon W3530
MEMORY: 24GB Samsung ECC Ram
HDD: 5 x 2TB WD in RAIDZ1
MOBO: Ausu P6T Deluxe
RUNNING: FreeNAS-9.10-STABLE-201606270534 (dd17351)
This morning I got an email from my NAS:
The volume ZFS1 (ZFS) state is ONLINE: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state.
Running zpool status -v I get the following:
As you can see two of my drives are showing resilvering.
Does this mean only one has issuies and another drive is being used to resolve it, or do I have two drives with problems?
Also, the resilver speed is ridiculously slow, 18.6K/s. Again this makes me think there is a faulty drive.
The console on the server shows the following message over and over again:
Am I correct in thinking the drive ada0 is screwed and needs replacing?
Can I offline ada0 and replace it or does the fact I have two drives showing "resilvering" mean I need to take a different course of action (I have a spare drive here ready to go into the system).
I'd appericate any help you can give me. :)
Thanks
David
I'm looking for some advice to resolve my issue with what I believe is a faulty drive (maybe two) as I'm still learning Freenas.
A little info about my system:
CPU: Intel Xeon W3530
MEMORY: 24GB Samsung ECC Ram
HDD: 5 x 2TB WD in RAIDZ1
MOBO: Ausu P6T Deluxe
RUNNING: FreeNAS-9.10-STABLE-201606270534 (dd17351)
This morning I got an email from my NAS:
The volume ZFS1 (ZFS) state is ONLINE: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state.
Running zpool status -v I get the following:
pool: ZFS1
state: ONLINE
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Wed Aug 17 12:47:49 2016
73.1M scanned out of 6.81T at 18.6K/s, (scan is slow, no estimated time)
6.61M resilvered, 0.00% done
config:
NAME STATE READ WRITE CKSUM
ZFS1 ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
gptid/bbb6c3ef-fd39-11e3-b935-001f29554225 ONLINE 0 0 0 (resilvering)
gptid/bc263c59-fd39-11e3-b935-001f29554225 ONLINE 0 0 0
gptid/bccdac9d-fd39-11e3-b935-001f29554225 ONLINE 0 0 0
gptid/bd5b3a21-fd39-11e3-b935-001f29554225 ONLINE 0 0 0
gptid/be37c79c-fd39-11e3-b935-001f29554225 ONLINE 0 0 0 (resilvering)
errors: Permanent errors have been detected in the following files:
ZFS1/Backups:<0x2f>
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 0h11m with 0 errors on Sun Aug 7 03:56:03 2016
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
da0p2 ONLINE 0 0 0
state: ONLINE
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Wed Aug 17 12:47:49 2016
73.1M scanned out of 6.81T at 18.6K/s, (scan is slow, no estimated time)
6.61M resilvered, 0.00% done
config:
NAME STATE READ WRITE CKSUM
ZFS1 ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
gptid/bbb6c3ef-fd39-11e3-b935-001f29554225 ONLINE 0 0 0 (resilvering)
gptid/bc263c59-fd39-11e3-b935-001f29554225 ONLINE 0 0 0
gptid/bccdac9d-fd39-11e3-b935-001f29554225 ONLINE 0 0 0
gptid/bd5b3a21-fd39-11e3-b935-001f29554225 ONLINE 0 0 0
gptid/be37c79c-fd39-11e3-b935-001f29554225 ONLINE 0 0 0 (resilvering)
errors: Permanent errors have been detected in the following files:
ZFS1/Backups:<0x2f>
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 0h11m with 0 errors on Sun Aug 7 03:56:03 2016
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
da0p2 ONLINE 0 0 0
As you can see two of my drives are showing resilvering.
Does this mean only one has issuies and another drive is being used to resolve it, or do I have two drives with problems?
Also, the resilver speed is ridiculously slow, 18.6K/s. Again this makes me think there is a faulty drive.
The console on the server shows the following message over and over again:
(ada0:ahcich0:0:0) : CAM status: ATA Status Error
(ada0:ahcich0:0:0) : ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0) : RES: 41 40 c0 40 fb 19 00 00 00 00
(ada0:ahcich0:0:0) : Retrying command
(ada0:ahcich0:0:0) : READ_FPDMA_QUEUED. ACB: 60 08 c0............... massive string of digits.
(ada0:ahcich0:0:0) : ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0) : RES: 41 40 c0 40 fb 19 00 00 00 00
(ada0:ahcich0:0:0) : Retrying command
(ada0:ahcich0:0:0) : READ_FPDMA_QUEUED. ACB: 60 08 c0............... massive string of digits.
Am I correct in thinking the drive ada0 is screwed and needs replacing?
Can I offline ada0 and replace it or does the fact I have two drives showing "resilvering" mean I need to take a different course of action (I have a spare drive here ready to go into the system).
I'd appericate any help you can give me. :)
Thanks
David