So...I read some older posts for LACP and nothing really gave me the indication that it worked or not, there were a bunch of 'try this or that' but nothing that I felt concrete to say LACP does or not not fully work. I just bought a 'XYRATEX IBM HS-1235E 12 BAY RAID Server XEON L5410 2.3GHz /...

Is it possible to directly connect FreeNAS to CentOS server usign LACP?

I've never setup Link Aggregation before and have a NAS server with Intel PRO 100/1000 x 6 I want to use primarily as a backup/archive server since it also has lots of storage. I have tested successful setup of LACP using 2 ports to confirm all the hardware is up to the task and now trying to...

Hey guys, I have issues with establishing LACP link aggregation. The GUI returns an error (see below) but the lagg0 interface shows up and is configurable if you ack the error message. However the link never becomes active on an arista port-channel. FreeNAS Version: FreeNAS-11.1-U4...

Is it Possible to use sysctls to set a mac address on a jails IP address when Vimage is disabled ? I ask because I switched to LAGG LACP. I have had great Performance gains but would like my macs to be set in stone. I looked for a list of sysctls commands but did not Find any related to this...

I had LAGG/LACP and NFS shares working seamlessly on this NAS for >2.5 yrs. Then, a GUI update to 11.1 failed and had to a complete reinstall. Although, the ZFS volume survived intact(I think). Setting up LAGG/LACP via GUI wizard results in this popup error (1, 2) But, when I look at...

Hello there! Wanted to make a load balance, how ever I can't add the final device to the SSH config as devices. It simply says it's not a legal device to add (GUI). Bug or not possible?

Hi, My problem is that it only wants to use one connected and not both. LACP is on both FreeNAS, ESXI, Switch. ESXI 5.5

Hallo, Ich brauche mal wieder eure Hilfe. Ich habe nun seit vielen Tagen das Vorhaben, wie im Titel beschrieben, LACP zum Laufen zu bekommen. Ich habe dafür meine bestehende Freenas Installation vom Stick abgezogen und 2 SSDs also OS Basis benutzt. Es wurde Freenas 11 neu installiert...

so, I'm not going to lie here, I'm a complete and utter idiot when it comes to networking, I can get windows running, I can get FreeNAS running, I can configure both systems, and I can even through tech support phone calls to dell and my firewall manufacturer (zyxel usg 50 on its own subnet) get...

Hello guys! My post is related to multiple NICs on the server and how AFP binds with them. I have been using HP Mirco Server with LACP, and FreeNAS is primarily used as a TimeMachine server. How it works: 2 NICs aggregated via LACP and AFP bound on this. How it does NOT work: 2NICs...

Hello All, I am about to build new Xenserver platform based on common storage which will be FreeNAS powered. The storage spec will be as follows: Disk: 400 500 TBytes space available, Memory: 512GB Network 4x10G nic Storage will serve around 10~15 Hypervisor xen hosts, each host will have also...

FreeNAS Version: 9.10.2 Hardware details: Motherboard: ASUS P10S WS Processor: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz RAM: 2 × Kingston(R) ValueRAM(R) 8GB 2133 ECC Pool configuration: 4 × Western Digital 4TB Red drives in RAIDZ2 configuration 1 × ADATA 240GB SSD for ZIL/ARC/Cache drive It...

Hi there , I have set up a freenas box this week . There are 8 loan cards attached to it. I have configured cisco switch . But the scenario is, when I try real-time bench mark , I hardly can cross 1gbps. And when I have checked the report , it shows only nic 4 was transmitting and receiving...

Bonjour Pour optimiser la bande passante je souhaite configurer les deux ports Ethernet Gigabit de mon FreeNAS en lien LACP (j'ai un switch Ubiquity en face qui le gère). Par contre je reste dubitatif par les explications du manuel: Il est dit, je cite: Before creating a link aggregation...