Here's my current set-up: Motherboard: X10SLL-F RAM: 8GB DDR3 ECC UDIMM RAM PC3-12800E Processor: Intel® Xeon® E3-1270 v3 This is a new setup, and I am trying to access the BIOS to change the boot order and install the OS, but am getting no video output. IPMI works, but iKVM shows no display...

Hi all. I currently have this motherboard with 2x "Super Talent 16GB (2x8GB) DDR3 1600 PC3-12800E 240-Pin ECC Unbuffered UDIMM Ram" ram. CPU is an E3-1230 V2. BIOS version 2.3 I'm running into a strange issue, where upon any reboot of the system causes the RAM to drop into non-ECC mode as...

Hi, I want to do a hard rest of the bios on my Supermicro X10SL7-F, and I was wondering if this would have any consequences for the flashed it-mode? My machine won't boot anymore and I don't remember my passwords for the ipmi account and my bios. To make things worse VGA port doesn't seem to...

Hi, this is my first server build. My hardware: CPU: Intel Xeon E-2172 RAM: 32 GB Samsung REG 2666 MB: Supermicro X11SCL-F HBA: LSI MegaRAID 9211-8i SAS HDD: 6 x WD Red Nas 4TB SSD: 1 x Intel 80GB The LSI card was given to me and should already be in IT mode. I checked that the MB BIOS was...

Hello everyone at the start of the freenas server I get the error "panic: free guard 1 fail .." because it tries to load the operating system from an external disk instead of from the key, despite the bios settings are right why? thank you

Hello, As a Freenas 11.1-U7 user I wanted to upgrade to the latest version to have the latest packages in my jails (and be able to finally upgrade my nextcloud). But I am actually facing some issues with the 11.2-U3 system upgrade. I tried multiple ways : - through the web GUI : the system is...

I'm setting up 2x Dell R510s for FreeNAS, and a few BIOS settings caught my eye. I couldn't find anything substantial after 5-10 mins of searching, and figured someone here might know. Here they each are with various blurbs from the manual. Processor Settings -> Adjacent Cache Line Prefetch...

I'm stumped. I've been trying to install FreeNAS 11.1-U6 on a USB stick, but something about it always freezes the BIOS on the PC I want to use. The motherboard is an older model: Gigabyte GA-D525TUD Atom board, which has some USB2 ports but no USB3s. I'm aware this freezing can happen with...

Well i own an LGA 1156 mobo - GA-P55A-UD6 with an i7-860 and 8GB of RAM. The thing is that i install normally FreeNAS on a USB stick from CD-ROM, but then when i try to boot it, my mobo cannot even POST. If i remove the attached USB the PC runs just fine. That happens only when the FreeNAS USB...

I got a used X9SRL-F board and a E5 v2 CPU, and it won't post, but IPMI works just fine. My understanding is that I need to update the BIOS to support v2 CPU's, however that fails as well because (according to SuperMicro webpage) the mobo BIOS version is too old. Does anyone have old versions...

Hi guys, After a quite short night (2am), I am just now in the process of tearing out the X8DT-6F motherboard from our SC846 chassis and replace it with something I got around here, just to get the storage working for Monday. I updated the BIOS of this motherboard on Frinday (flashing went...

Hey everyone, So I just installed a Xeon E3-1240 v3 with the stock cooler (left over from a G3258, from what I could tell they use the same stock cooler form intel). Anyways, I cleared CMOS as per my board's instructions but I think it is having trouble booting. While posting, my board beeps 3...

I'm a bit skeptical on buying a Intel Xeon E3-1230 V6 because the Supermicro website says that BIOS version 2.0 or above is required for "Intel® Xeon® Processor E3-1200 v6 series" processors. Does the X11SSH-CTF ship with a BIOS version >= 2.0 or would I need to flash it? If I have to flash it...

Hi, I bought this MB new and it arrive today. I finish the build, have OS drive ready, but it takes FOREVER to boot, like sitting there for 30 minutes slowly the numbers at the bottom changing every now and then. After some research, it appears that the BIOS can't boot the CPU I've bought -...

I'm setting up a new FreeNAS 9.10 build on an ASRock C2750D4I motherboard. The default BIOS settings under `Advanced -> Storage Configuration` are: ~ ~ ~ ~ I have two questions: 1. The `Hard Disk S.M.A.R.T.` needs to be switched to `Enabled`, right? 2. Are there any other...

Foro buen día, instalé FreeNAS en un sistema lenovo M72e, he seleccionado en varios intentos el tipo de boot, UEFI y BIOS, configuré el BIOS del equipo en UEFI y Legacy BIOS y no es posible arrancar FreeNAS, el equipo marca un error donde dice "Error 1962, no system found". ¿Alguien ha tenido...

I've just performed the first boot on a system with a Supermicro X11SSM-F board and a Pentium G4560 CPU. I ran into a few problems, however: I connected an old VGA monitor to see the POST output, but it stops at "PEI - CPU Initialization", with error 35. I googled the problem, and it seems...

I've been wanting to build a FreeNAS server for awhile now and after seeing this thread: https://forums.freenas.org/index.php?threads/ode-to-the-dell-c2100-fs12-ty.43665/ I got set on using the C2100. Flash forward and I have almost all my hardware here ( missing a heatsink from guys I ordered...

For anybody considering SM-X11 + Crucial-ECC: I'm running SM+Crucial since summer now and it keeps sometimes crashing - not often, but ugly enough. It just reboots with no log entries. After the automatically following reboot is triggered another bug, this time SM BIOS, telling you "No RAM...

Hi all, This is a fairly trivial "how to", but it might just save your board if you have an ASRock C2x50 D4i board. These boards currently have a firmware bug which causes BMC flash memory to be written every time the watchdog is patted. Given enough time, the flash memory massively exceeds its...